Tru-Test XRS2 Stick Reader Guide de démarrage rapide

1

QUICKSTART GUIDE

This quickstart guide provides basic instructions for setting up and using your XRS2

Stick Reader.

Contents

Unpacking the box .................................. 1

Charging the battery ................................ 2

Getting around ........................................ 2

Recording EID tags .................................. 3

Bluetooth

®

connection ............................. 5

Viewing sessions ..................................... 6

Getting information off ............................ 7

Datamars Livestock cloud software .......... 8

Making the most of your stick reader ....... 9

Getting help .......................................... 11

Modifying settings ................................. 13

Maintenance and servicing .................... 16

Compliance ........................................... 18

For further information, view the

reference information on the supplied

USB stick or visit tru-test.com

?

See

“Getting help”

on page 11

1

Unpacking the box

Check that you have all of these items. If anything is missing, contact your supplier.

XRS2 stick reader (the stick reader)

USB stick

contains Data Link PC

software and reference

information.

USB cable

for charging. It also

connects the stick reader

to a PC.

Mains power adaptor

and power plugs for

different countries.

2

Charging the battery

• Use only the power adaptor and cables supplied.

• Do not charge the battery if the temperature is less than 5 °C (41 °F),

or greater than 40 °C (104 °F).

3

Getting around

Parts of the stick reader

3

The Home screen

When you first switch on the

stick reader, the Home screen is

displayed:

Scroll through the options using

the arrow keys

and

and choose an option using the

Select button.

4

Recording EID tags

Ways of using the stick reader

The stick reader can be used in two ways:

1. Standalone - the stick reader saves each scanned tag in its internal memory.

These records can be transferred afterwards, as described in

Section 7 –

Getting information off

.

2. Connected – the EID reader immediately transmits every scanned tag to a

connected device, such as a weigh scale indicator.

Recording EID tags (standalone)

You should start a new session file each time you begin a new scanning

session.

1. Press

to switch on the stick reader.

2. On the Home screen, press

and select New Session.

3. If desired, change the session name using the keypad.

4. Press

.

4

5. Press the Read button while holding the stick reader near to an EID tag.

When scanning EID tags, if animals are moving quickly through a race

or into a pen, you can continuously hold down the Read button to scan

EID tags. Scanning will stop when the Read button is released.

Entering other information

During scanning, other information can be recorded at the same time. You can

enter:

 The VID (visual ID)

 Details about the animal, such as a condition score or animal breed.

 Any other details you like, using your own additional animal data field.

See

Section 9 - Making the most of your stick reader

for details.

Displaying other information

Some information can also be pre-loaded for viewing during scanning:

 Alerts – so that you are notified when a particular EID tag is scanned

 Animal lifetime information – this may include EID/VID pairs so that the

animal’s VID appears automatically when an EID tag is scanned.

See

Section 9 - Making the most of your stick reader

for details.

5

Bluetooth

®

connection

The stick reader will automatically connect to any Tru-Test

Bluetooth

enabled

weigh scale indicator, or any other device, with which it has previously been paired

(when in BT Auto mode - default).

In order to manually establish a

Bluetooth

wireless connection (if you are using a

non-Tru-Test weigh scale indicator, or you are having trouble establishing a

Bluetooth

wireless connection):

1.

With both devices off, position the stick reader close to the

other device.

2. Switch on the device and, if necessary, check that its

Bluetooth

setting is enabled.

3. Switch on the stick reader.

4. Select Settings, then Bluetooth to display the Bluetooth

Settings screen.

5. Select Search for devices.

A list of available devices will be displayed.

6. Select a device.

Wait for up to one minute until the two devices are paired.

When pairing is complete, the

Bluetooth

indicator light above

the Read/Select button will illuminate blue.

7. Use the stick reader to scan an EID tag in order to test the

connection.

Always turn on the device you are trying to pair with first, BEFORE the

stick reader.

6

Viewing sessions

You can view information collected during a session in the Sessions screen.

1. If necessary, press

to go to the Home screen.

2. Select Sessions.

A list of sessions is displayed.

3. Select a session to view:

7

Getting information off

There are two ways to get information off the XRS2 stick reader.

Data Link PC software

You can:

• save session files

• save animal lifetime information

• save alerts

• register a transaction with NAIT (NZ) or

NLIS (Australia)

• upload sessions to Datamars Livestock

To do this:

1. Connect the stick reader to a

PC using the cable supplied.

2. Launch Data Link on your PC.

3. Click

to get information

off the stick reader.

Data Link app for mobile devices

You can:

• email a session file

• register a transaction with NAIT

(NZ) or NLIS (Australia)

• upload sessions to Datamars

Livestock

To do this:

Launch the app on your

smartphone and follow the

instructions.

The Tru-Test Data Link app is available to download for free from the

Google Play* store (Android* devices) or the Apple App store* (Apple

iOS*).

8

Datamars Livestock cloud

software

View your data online, anywhere, with Datamars Livestock. Datamars Livestock

allows you to monitor animal weight gains and track performance to target weights.

Monitor animals in groups, and act early if they fall behind target; or track

individually to identify top performers and slow growing stock.

livestock.datamars.com

9

Making the most of your stick

reader

Entering extra information during scanning

During scanning, you can add extra information about the animal, such as the

animal’s breed or condition score. You can also create your own additional animal

data fields for entering information.

To set up a field for entering information during scanning:

1. From the Home screen, select Settings, then Animal Data.

2. Select one of the fields (Breed, Date of birth, Sex, Condition score and Note are

defaults).

3. Change the screen order to 1 (if using multiple fields for data entry, you may

want to select a different number to have the data field appear further down

the screen).

4. Select edit to change the field name or the options.

You can create your own additional animal data fields. At step 2 above,

press

and follow the prompts.

Example of entering data during scanning (Breed and Condition score fields):

10

Pre-loading animal lifetime information or alerts to the stick

reader, prior to scanning

Animal lifetime information or alerts can be transferred from the PC to the stick

reader prior to scanning, using the Data Link PC software.

Animal lifetime information

If animal lifetime information is transferred, when an animal’s EID tag is scanned,

other information about the animal will be displayed. For example, you can transfer

a file containing EID and VID pairs. During scanning, when an EID tag is scanned,

the corresponding VID number will be displayed automatically.

For details about animal lifetime information refer to the

Setup Guide -

Transferring animal lifetime information to the XRS2 Stick Reader

.

See section 10

- Getting other detailed information

.

Alerts

If alerts information is transferred, when an animal’s EID tag is scanned, an alert

will be issued. For example, you may want to receive an alert to cull a particular

animal from the herd.

To transfer animal lifetime information or alerts from the PC to the stick reader:

1. Connect the stick reader to a PC using the cable supplied.

2. Launch Data Link on your PC.

3. Click

, select Animal Lifetime Information or Alerts file and follow the

prompts.

The PC file containing animal lifetime information can be in .csv, .xls,

.xlsx or .txt format, but it must be formatted in a certain way.

For details about setting up alerts refer to the

Setup Guide

-

Setting up

Alerts on the XRS2 Stick Reader

. See section 10

- Getting other detailed

information

.

11

10

Getting help

Help articles and videos

The Datamars Livestock Help Centre provides searchable articles and videos to help

you when you need it. The Help Centre provides instant support for our apps,

software and products. Access the help centre via the Data Link app or go to

support.livestock.datamars.com

Online training

The Datamars Livestock Training Academy provides easy, accessible online training

modules. You can work at your own pace to learn about our products and

solutions. Register for free at livestock.datamars.com/training-academy

12

Instructional setup guides

Setup Guides help you make the most of your Tru-Test device. They provide

instructions and practical examples to help you:

 Set up and use advanced features

 Use your device with other third-party software or hardware.

Examples of some titles:



Setting up Alerts on the XRS2 Stick Reader



XRS2 Offspring Pairing



Transferring animal lifetime information to the XRS2 Stick Reader

To access these guides:

1. Go to tru-test.com

2. Click Guides & Advice > Set-up Guides.

3. Filter and navigate to the product information you want.

~ or ~

• Click into the product page

and click Set-up Guides on

the left panel menu.

XRS2 product page

Troubleshooting

For personalised troubleshooting and advice, chat with us directly. In the Data Link

app, tap on

, then . In the Tru-Test website tru-test.com, Data Link Help

Centre or Datamars Livestock Training Academy click on

in the bottom right-

hand corner of the screen.

13

11

Modifying settings

When shipped, the stick reader is set up to simply scan EID tags. You can change the

way that the stick reader is set up to suit the task that you are about to perform.

Favourite setups

Favourite setups (favourites) are saved configurations that change the settings of

the stick reader to suit a particular purpose. The stick reader comes pre-loaded with

some example favourites or you can create your own custom favourite. You can

apply a favourite when starting a new session.

Settings menu

To modify the settings, from the Home screen, select Settings.

After you have changed any settings, you can save these as your own

custom favourite. You can then apply this favourite next time that you

want to do the same task.

General

Change the

Date/Time

,

Language/Country

,

Auto Off

,

Vibration

and

Buzzer

settings.

View the stick reader

Firmware

details.

Bluetooth

Auto** – Automatically connect to the

Bluetooth

®

enabled device most

recently used or to a Tru-Test

Bluetooth

enabled weigh scale indicator.

Off – Turn off

Bluetooth

wireless connectivity.

Manual – Manually search for a

Bluetooth

enabled device and accept

incoming

Bluetooth

connections.

14

Search for Devices

– Manually search for a

Bluetooth

enabled device within

range (see row above).

Paired Devices

– Display previously connected (paired) devices.

Advanced

Connect Mode

Default** – set this mode to connect to weigh scale indicators and most

software systems.

HID (Human Interface Device) – set this mode if you want the scanned

EID tag to be automatically transmitted to a spreadsheet (e.g. Excel), or

another device that has not directly integrated with the stick reader.

Output

Default** – Leave this set to Default unless you have been instructed to

change it by a Datamars representative.

Tag Reading

Read Mode

Standard** – Press the Read button to scan a tag. Hold down the Read

button to continuously scan tags.

Continuous – Press the Read button to continuously scan tags. Scanning will

only stop when the Read button is pressed again.

Single – Press the Read button to scan a single tag. Even if you hold down

the Read button, another tag will not be scanned.

Tag Format -

Format and example shown:

Decimal** 964 155000012939

Decimal2

964155000012939

Hex

8000F66416B8808B

ISO

1000000964155000012939

ISO23

A0000000964000000123456 (animal) or

R0000000964000000123456 (non-animal)

15

Allow Duplicates

No** – Set to ensure that an EID is not recorded multiple times in the same

session.

Yes – Set to allow EIDs to be recorded multiple times in the same session.

Offspring Mode

On – Set this mode to enable you to link a dam with her offspring so that

you can look up breeding histories.

Off** – Turn off offspring pairing.

For details about offspring mode refer to the

Setup Guide -

XRS2 Offspring Pairing.

See section 10

- Getting other detailed

information.

Animal Data

The stick reader comes pre-loaded with various animal data fields (Breed, Date of

birth, Sex, Condition score and Note). You can also create your own additional

animal data fields. Select field(s) to appear on the screen during scanning. See

Section 9 – Making the most of your stick reader

.

Alerts

Turn on Alerts if you want to be warned when a particular animal’s tag has been

scanned. You need to transfer an alerts file to the stick reader first. See

Section 9 –

Making the most of your stick reader

.

Favourites

To save settings as a custom favourite:

1. From the Home screen, select Settings, then Favourites.

2. Press

, complete the details and press

.

Default settings marked **

16

12

Maintenance and servicing

Backing up your information

We strongly recommend that you regularly back up the data on your stick reader by

transferring it to a PC using Data Link PC software.

Updating your software

We recommend that you regularly update the stick reader software so that you

keep up with the latest features and improvements.

To update the software:

1. Connect the stick reader to a PC using the cable supplied.

2. Launch Data Link on your PC.

3. Click Tools / Updates.

4. Follow the step-by-step instructions.

For more information, see the Data Link help.

When updating software, the data on your stick reader will remain

intact. However, we strongly recommend that you transfer the

information on your stick reader onto a PC

before

updating.

17

Caring for the stick reader

Wipe the stick reader clean using a damp cloth, warm water and soap. Other

cleaners may damage the case or screen.

Do not immerse the stick reader in water.

Do not leave the stick reader where it may be exposed to extreme temperatures

(e.g. on the dashboard of a vehicle).

Store the stick reader in a cool, dry place.

Fit the dust cap when there are no cables connected to the stick reader. This will

prevent moisture and dirt from entering the socket.

Europe - Instructions for disposal of product

This symbol on the product or its packaging indicates that this product

(and its batteries) must not be disposed of with other waste. Instead, it is

your responsibility to dispose of your waste equipment by handing it over

to a designated collection point for the recycling of waste electrical and

electronic equipment. The separate collection and recycling of your waste

equipment at the time of disposal will help conserve natural resources and

ensure that it is recycled in a manner that protects human health and the

environment. For more information about where you can drop off your

waste equipment for recycling, please contact your local city recycling

office or the dealer from whom you purchased the product.

This product incorporates both a lithium-ion (LiCoO

2

) rechargeable battery and a

lithium metal (CR1220 35 mAh) button/coin cell battery.

For instructions on how to dismantle this product for recycling, email

service.dept@datamars.com

18

13

Compliance

FCC notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

- Any changes or modifications not expressly approved by Datamars could void the user's authority to operate the equipment

FCC warning

Note: Users are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Responsible party in the USA

This product is supplied by:

Datamars Inc

528 Grant Road

Mineral Wells

Texas 76067

UNITED STATES

Toll free: 800 874 8494

ISED Canada notice

This radio transmitter, model XRS2-1, has been approved by Innovation, Science and Economic Development Canada to operate

only with its integral antenna.

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

UK declaration of conformity

Hereby, Datamars declares that the radio equipment type XRS2-1 is in compliance with the relevant statutory

requirements. The full text of the declaration of conformity is available at the following internet address

http://livestock.tru-test.com/en/compliance

UK Importer:

Datamars UK,

Pheasant Mill, Dunsdale Rd,

Selkirk TD7 5DZ,

United Kingdom

19

EU declaration of conformity

Hereby, Datamars declares that the radio equipment type XRS2-1 is in compliance with Directive 2014/53/EU. The full

text of the EU declaration of conformity is available at the following internet address:

http://livestock.tru-test.com/en/compliance

This radio equipment emits a maximum of 0.7 mW e.i.r.p. in the frequency band 134.18 to 134.22 kHz and a maximum of 18 mW

e.i.r.p. in the frequency band 2.40 to 2.48 GHz.

The

Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by

Datamars SA and its subsidiaries is under license. Other trademarks and trade names are those of their respective holders.

All trademarks with an * are neither owned by nor licensed to Datamars SA and belong to their respective owners.

EU Importer:

Datamars Slovakia s.r.o.

Dolné Hony 6, 949 01

Nitra, Slovak Republic

20

GUÍA DE INICIO RÁPIDO

Esta guía de inicio rápido ofrece instrucciones básicas para configurar y usar su

lector de bastón XRS2.

Contenidos

Instrucciones de desempacado ...................................... 20

Cómo cargar la batería ................................................. 21

Vistazo general ............................................................. 21

Registro de etiquetas IDE .............................................. 22

Conexión

Bluetooth

®

.................................................... 24

Visualización de sesiones .............................................. 25

Transferencia de datos .................................................. 26

Software en la nube de Datamars Livestock .................. 27

Cómo aprovechar al máximo su lector de bastón ........... 28

Ayuda .......................................................................... 30

Modificación de la configuración ................................... 33

Mantenimiento y servicio .............................................. 36

Cumplimiento normativo .............................................. 38

Para mayor información, vea la

información de referencia en la

unidad flash USB suministrada o

visite tru-test.com

?

Véase

“Ayuda”

en la página 30

1

Instrucciones de desempacado

Revise que cuente con todos estos artículos. Si falta algo, póngase en contacto con

su proveedor.

Lector de bastón XRS2 (el lector de bastón)

La memoria USB

contiene el software Data

Link para PC y la

información de referencia.

Cable USB

para cargar. También se

usa para conectar el lector

de bastón a una PC.

Adaptador de corriente

eléctrica

y enchufes para distintos

países.

La page est en cours de chargement...

Tru-Test XRS2 Stick Reader Guide de démarrage rapide

Tru-Test XRS2 Stick Reader Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents