Levana LV-TW502 Manuel utilisateur

Catégorie
Moniteurs vidéo bébé
Taper
Manuel utilisateur

Ce manuel convient également à

USeR MANUAL
www.myLevana.com
Model #:
Model #: LV-TW502
Safe N’ SeeAdvanced
Digital Video Monitor
With Talk To Baby™ Intercom
2
Need
heLp?
DO NOT RETURN THIS
PRODUCT TO THE STORE
Please contact a Levana customer support representative regarding any additional information on product
features, specications or if you need any help with set-up, we are available 24/7!
Please contact us via one of the methods below:
Toll free telephone:
1.866.946.7828
For more product information visit www.mylevana.com
Email:
support@mylevana.com
Online live web chat:
Visit www.mylevana.com
Toll free fax:
1.888.771.1701
Note: This is manual version 1.0 for this product, you may nd updated versions by visiting our website
IMPORTANT! PLEASE READ
3
INTRODUCTION
NEED HELP? ................................................................................................................................................... 2
INTRODUCTION ............................................................................................................................................ 3
FEATURES ..................................................................................................................................................... 4
BUTTONS AND CONNECTIONS - MONITOR ..................................................................................................... 6
BUTTONS AND CONNECTIONS - CAMERA ....................................................................................................... 8
CAMERA SETUP AND MOUNTING GUIDE ....................................................................................................... 10
SETTING UP YOUR SYSTEM .......................................................................................................................... 11
BATTERY OPERATION ................................................................................................................. 11
ATTACHING POWER TO THE CAMERA ......................................................................................... 11
INSTALLING THE RECHARGEABLE BATTERY ................................................................................. 12
CHARGING THE MONITOR AND RECHARGEABLE BATTERY ........................................................... 12
CAMERA OPERATION .................................................................................................................................. 12
SWITCHING THE CAMERA ON/OFF ............................................................................................. 12
NIGHT VISION ............................................................................................................................ 13
MONITOR OPERATION ................................................................................................................................ 13
SWITCHING THE MONITOR ON/OFF ............................................................................................. 13
SETTING THE BRIGHTNESS ......................................................................................................... 14
ADJUSTING THE TEMPERATURE DISPLAY .................................................................................... 14
SWITCHING THE NIGHT LIGHT ON/OFF........................................................................................ 14
SELECTING A LULLABY ............................................................................................................... 14
ADJUSTING THE VOX SENSITIVITY .............................................................................................. 15
INTERCOM FEATURE ................................................................................................................... 15
RANGE ...................................................................................................................................... 15
ADJUSTING THE VOLUME............................................................................................................ 15
PAIRING ..................................................................................................................................................... 16
TROUBLESHOOTING .................................................................................................................................... 17
SPECIFICATIONS ......................................................................................................................................... 18
FCC STATEMENT ......................................................................................................................................... 19
SAFETY INSTRUCTIONS ............................................................................................................................... 20
PRODUCT WARRANTY INFORMATION .......................................................................................................... 21
TABLE OF CONTENTS
Congratulations on your purchase of the Levana TW502 Digital Video
Baby Monitor! This monitor uses advanced Clearvu® digital technology
that will deliver a crystal clear view of your baby’s room on the 3.5"
LCD screen, from anywhere in your home! Feel free to relax and take
comfort in knowing that your child is in good hands with Levana.
4
FEATURES
ClearVu® Digital Wireless Technology
ClearVu® technology ensures outstanding image and sound clarity so that you can
watch and listen to your child up to 500ft away
1
. Feel free to move around the house and no matter where you go, you
will always see your baby. With Levana, you’ll never miss a moment.
Large LCD for Superior Viewing Quality
Imagine what you will catch your baby doing on this bright and clear, large 3.5” LCD screen. With an LCD of this size
you will be able to set the monitor down and still see your baby clearly!
Temperature Monitoring to Ensure Safety
Studies indicate that your baby’s room should be between 61-68° F (16-20° C). This system is equipped with
temperature monitoring so you can monitor the temperature in your baby’s room and know they are always
comfortable.
Talk to Baby Intercom
Soothe your baby from a distance with the talk-to-baby intercom. With the simple press of a button you can let your
baby know you are on your way to their nursery or simply talk to them until they fall back to sleep without having to
go into his or her room.
Five Soothing Lullabies
Choose from ve dierent lullabies to soothe your baby to sleep. Turn lullabies on and o as well as change the song
being played all from the parent unit with the simple push of a button. Choose from Rock-a-Bye Baby, Hush Little
Baby, Itsy-Bitsy Spider, Sleep Baby Sleep and Twinkle Twinkle.
Night Vision
The built-in night vision allows you to see your child, even in complete darkness up to 10ft away. When the lights go
down the system automatically adjusts to the level of light. The camera can be placed anywhere in your child’s room
while still displaying a precise image of your baby
2
.
Relaxing Nightlight
The baby unit has a gentle nightlight that you are able to turn on and o from the parent unit. Turn the light on if your
baby is getting restless to calm them and turn it o when your baby is asleep, all without going into the baby’s room.
Voice Activated Control
Conserve battery power and sleep well at night with VOX activation. VOX allows you to turn o the monitor while your
child is safe and sound. It will only turn on when they make noise. You have the ability to adjust the level of sound
needed in order for your monitor to turn on.
Rechargeable Monitor
Enjoy up to four hours of continuous audio and video monitoring with a fully charged unit
3
.
LED Noise Level Indication Lights
The monitor has LED lights on it that light up to display up to ve dierent levels of sound.
This means you can turn the volume all the way down, relax and still know when and how much noise your baby is
making.
5
FEATURES
All-in-One Table Stand and Belt Clip
The table-stand also functions as a belt clip for ultra usability. Place the monitor upright with the table stand when
you are in the same room. You can also carry the monitor with you and still have both hands available by using the
belt clip.
Energy Ecient Power Adapter
The power adapters save you on power all while saving the environment. They are rated with a Level V eciency
standard which means they are 30% more energy ecient then other conventional power adapters.
Wall Mount on Baby Camera for the Best Viewing Angle
The camera can be wall mounted so you can easily view your baby in its crib as well as see all other parts of the
nursery.
Lifetime Live Customer Support
Our customer support team can be reached by phone, by email and live web chat. Our experts will be happy to assist
you in English, French and Spanish.
Disclaimers
1. Optimum range is 150ft when signal is passing through walls or oors. Microwave ovens (when in use) may cause signal disruption at close
range. Buildings with metal frames may also cause signal disruption. Maximum transmission range is 500ft.
2. Night vision range up to 10ft under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on
the camera application.
3. Battery life of 4 hours based on full duration testing. Battery life may vary depending on usage.
4. Product may not be exactly as shown on the package. Some images are used for illustration purposes only.
Notes
• Levana does not endorse any of its products for illegal activities. Levana is not responsible or liable in any way for any damage, vandalism,
theft or any other action that may occur while a Levana product is in use by the purchaser.
• Forsafetyreasons,babymonitorswithpowercordsshouldneverbehungonornearthecrib.Powercordsshouldbekeptatleast3feetaway
from the crib and baby’s reach at all times.
OPTIONAL ACCESSORIES
Extra Camera: LV-TW501-C
This system supports up to 3
additional cameras!
6
BUTTONS AND CONNECTIONS - MONITOR
7
1. Antenna
Transmits and receives signals
2. Rechargeable Battery Compartment
Insert the rechargeable battery here
3. Belt Clip and Support Stand
Flip up to use as a belt clip, or down to use as a support stand
4. Speaker
5. ON/OFF Button
Turns the unit ON and OFF
6. Talk Button
Enables you to speak through the camera intercom
7. Menu Button
Brings up the menu options
8. Power LED
Indicates the amount of battery left, green means the battery is charged, red means the battery
power is low
9. VOX LED
Illuminates green when VOX is enabled
10. Volume Level LEDs
Indicates the amount of sound being heard by the camera
11. Microphone
Press the talk button and speak into the microphone to talk to your baby
12. Volume Buttons
Increases/decreases the volume through the speakers; adjust settings in the menu
13. Play/Pause
Plays or pauses the lullaby playing through the camera
14. Lullaby Selector
Selects the lullaby that the camera will play
15. LCD Screen
Displays video of your baby
BUTTONS AND CONNECTIONS - MONITOR
8
BUTTONS AND CONNECTIONS - CAMERA
9
1. Antenna
Transmits and receives signals
2. Night Vision IR LEDs
Allows you to see up to 10 feet in complete
darkness
3. Camera Lens
Point at what you would like to view on the
monitor
4. Microphone
Captures all sounds in the baby’s room
5. Night Light
Soothe baby to sleep with the built in night
light
6. CDS Light Sensor
Detects the absence of light
and turns on night vision
7. Power LED
Indicates that the camera is
powered on
8. Power Input
Plug the included adapter into
this jack
9. Temperature Sensor
Reads the temperature and displays it on the
monitor
10. Battery Compartment
Remove screw to install 4 AAA batteries (not
included) for a completely wireless system
BUTTONS AND CONNECTIONS - CAMERA
10
This is a safety notice that is aimed at educating parents and caregivers of the
potential safety hazards associated with power cords being placed too close to a crib, play
area, or other baby sleep environment. Power cords should NEVER be placed within 3 feet of a crib, or within
baby’s reach. Using Levanas Camera Setup and Mounting Guide, you can monitor your baby while they sleep
safely in their crib.
To Mount on a Tabletop Safely (Figure A):
1. Place the camera on a tabletop at least 3 feet away from your babys crib.
2. Feed the power cord down the back of the table or use wall clips to secure the cord away so baby cannot
reach.
3. Plug in the power cord, check to ensure that you can see your child and there are no viewing obstructions.
To Mount on a Wall Safely (Figure B-C):
Before drilling a hole, it is important to check the reception and camera positioning in the place that you
intend on hanging it to the wall. Ensure you are hanging the camera at least 3 feet away from babys crib.
1. Pre-drill a hole in the wall using a 3/16", 4.8mm drill bit.
2. Insert a wall anchor into the wall and tap gently with a hammer until the anchor is ush with the wall.
3. Insert a screw into the wall anchor and tighten until the screw only sticks out about 1/2 inch.
4. Plug the power cord into the power jack of the camera.
5. Locate the wall mounting hole on the bottom of the camera.
6. Slide the hole over the screw sticking out of the wall (Figure C).
7. Check to see that the monitor is secure, if it is loose you may have to tighten the screw more.
8. Use wall clips to secure the power cord away from the crib or babys reach.
C
B
A
CAMERA SETUP AND MOUNTING GUIDE
For more information please visit our website:
www.mylevana.com/safety
11
SETTING UP YOUR SYSTEM
Battery Operation
The camera unit can be powered using 4 AAA batteries instead of the included AC adapter.
1. Remove the battery compartment cover on the bottom of the camera base, using a small phillips
(cross) head screwdriver.
2. Place 4 AAA batteries (not included) in the compartment, paying attention to the labelled polarity
markings.
3. Replace the battery compartment cover using the small screwdriver.
Note: The power LED will ash when the battery charge is low.
Attaching Power to the Camera
1. Connect the small end of the power adapter into the DC Jack on the back of the camera.
2. Connect the other end of the adapter into an available wall outlet.
Remove Screw Using Small
Philips Head Screwdriver
12
Note: When the battery in the monitor is low battery, the power LED will turn red, when the power
plug has been inserted the power LED will turn green to show it is charging.
SETTING UP YOUR SYSTEM
Installing the Rechargeable Battery
1. Turn the belt clip on the back of the monitor
unit upwards.
2. Remove the battery compartment cover
using a at edge screwdriver to twist the
battery compartment latch to the open
position.
3. Insert the included rechargeable battery,
ensuring that the copper connections on the
battery line up with the copper connections
on the inside of the battery compartment.
4. Replace the battery compartment cover and
use a at edge screwdriver to tighten the
latch to the locked position.
Charging the Monitor and Rechargeable Battery
1. To charge the battery in the monitor unit, plug the included power adapter into the
power input jack on the right side of the monitor.
2. The power LED will light up red to indicate that the battery is being charged.
3. For safety reasons, use ONLY the adapters included in the package.
Copper Connections
Switching the Camera ON/OFF
Position the camera to view the area you wish to monitor, angle the camera
lens for best view, by turning it up or down.
1. Slide the power switch
to the ON position.
2. The Power LED on the front of the camera will light up green. The
camera is now ready to operate.
3. To turn OFF the camera, ip the power switch
back to the OFF
position.
CAMERA OPERATION
13
CAMERA OPERATION
Switching the Monitor ON/OFF
1. Press and hold the power button until
you hear two beeps.
2. The LEVANA logo will appear on the screen
for a moment followed by the picture being
transmitted.
3. To turn o the unit, press and hold the power
button again for 1 second.
Note: The power LED will turn red when the rechargeable battery is low power.
Note: If you are using batteries to power the camera unit, and it does not start up
when the power switch is in the ON position, you may need to replace the
batteries. The Power LED will ash slowly when the batteries are low power.
Night Vision
The camera is equipped with four IR (infrared) LEDs. These LEDs, located on the front of the camera, allow
you to see up to ten feet in complete darkness. Allowing you to check your baby at any time of night.The
night vision LEDs will activate automatically when the camera detects that the light levels are too low.
MONITOR OPERATION
Without Night Vision With Night Vision
14
MONITOR OPERATION
Setting the Brightness
1. Press the menu button once.
2. The brightness icon will display on the screen
along with the brightness gauge that will indicate
the current set level.
3. Use the up and down buttons to adjust the
brightness level up and down.
Adjusting the Temperature Display
The ideal temperature for a babys room is between 16° - 20° C or 61° - 68° F. Please set or adjust the room
temperature accordingly.
1. Press the menu button
twice.
2. The temperature icon will display on the screen along with the current status of the temperature
function, either Celcius, Fahrenheit, or OFF.
3. Use the up and down buttons to turn the temperature function ON, to switch between either
Celcius or Fahrenheit, or to turn the temperature function OFF.
Switching the Night Light ON/OFF
1. Press the menu button three times.
2. The night light icon
will display on the
screen along with the current status of the
function, either ON or OFF.
3. Use the up and down buttons to
turn the night light of the camera ON or OFF.
Selecting a Lullaby
1. Press the play/pause button on the
right hand side of the monitor once.
2. The lullaby icon
will appear on the
monitor screen, and the last played lullaby will
start to play.
3. Press the lullaby button on the right
side of the monitor to select one of ve
lullabies to play.
4. Press the up and down volume buttons
during playback to adjust the volume of the
music.
15
Adjusting the VOX* Sensitivity
VOX = Voice Operated Transmission = Sound Detection
The VOX function allows the camera to transmit video and audio immediately after a sound is heard. Once
transmission begins, the video will play for 10 seconds if no more noise is heard. Pressing a button on the
monitor will also turn the screen and transmission ON at any time.
Setting the sensitivity of the VOX function will aect how easily the video will be transmitted, one bar
will require much louder sounds being detected before transmission will begin, than the ve bar setting
requires.
1. Press the menu button
four times.
2. The VOX icon
will display on the screen along with the current status of the function, either
OFF or a gauge indicating the current sensitivity, 1-5.
3. Use the up and down buttons to turn the VOX function OFF or adjust the sensitivity up and
down. One bar being the lowest sensitivity and ve bars being the highest sensitivity.
Intercom Feature
This video baby monitor is equipped with a 2-way audio intercom to enable you to talk to and soothe your
baby back to sleep without going into the room.
1. Press and hold the intercom button
in the
middle of the front of the monitor.
2. The intercom icon will appear on the monitor screen,
and you will be able to speak and be heard through
the speaker in the camera.
3. To stop talking release the intercom button.
Range
• When the distance between the camera and monitor is too great, the screen will go black and the
range icon will appear
, if this happens you will have to move the units closer together.
Adjusting the volume
1. In normal monitor operation, you can press the
up and down
buttons on the monitor to
adjust the volume of the noises you are hearing
from babys room.
MONITOR OPERATION
16
PAIRING THE DEVICES
The camera and monitor come paired (connected) together. If you do receive this
package and the devices do not automatically connect and transmit, you may do so
manually.
1. Slide the power switch
on the right hand
side of the camera to the OFF position.
2. Cover the light sensor on the front of the camera
with your nger or a cloth.
3. Slide the power switch
on the camera to
the ON position.
4. With the monitor switched on, press and hold
the play/pause button
for two seconds.
5. The pair icon will appear on the screen
and the power LED on the camera will blink for
a few seconds.
6. Press the menu button on the monitor to
conrm the setting.
7. C1... OK! will appear when the camera and
monitor are paired successfully and then
the video and audio will be transmitted
automatically.
Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all sources of power
from the camera and monitor and start the pairing process over again.
Light Sensor
17
TROUBLESHOOTING
PROBLEM SOLUTION
Equipment does not function • Camera and/or monitor are not
switched on
• The battery is dead or defective
• The power adapters are not connected
No reception/Screen freezes or turns black • Camera and monitor are not paired
• Camera is too far away from monitor
• The VOX sensitivity is set too low
• No signal
Reception interference (static) • The camera and monitor are too far apart
• The battery power is too low
• Other electronic devices are interfering with the
signal
• The camera or monitor are placed near too many
metal objects
Feedback (screeching, static) • The camera and monitor are too close together
• The volume on the monitor is set too high
Noise • Battery power is too low
Picture works but there is no sound • Volume setting is too low
Picture is black and white • Night vision LEDs are ON
• Increase the amount of light in the room being
monitored
The rechargeable battery will not charge • The power adapters are not connected
• Battery pack is not plugged in inside the battery
compartment
Maintenance
• Clean the surfaces of the camera and monitor with a soft, u-free cloth
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into
any openings
• Never use cleaning agents or solvents
18
SPECIFICATIONS
Camera Specications
Input Power.......................................................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA
Output Power ....................................................................................6 VDC ~ 800mA
IR LEDs and Range .............................................................................4 LEDs, 10 foot range
Range.................................................................................................500 Feet Maximum
Frequency Range ...............................................................................2.4 GHz
Operable Temperature ....................................................................... 32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)
Transmission Power ...........................................................................15 ~17 dBm
Monitor Specications
Input Power .......................................................................................100 - 240 VAC, 50 - 60 Hz ~ 200 mA
Output Power ..................................................................................... 6 VDC ~ 800mA
Operable Temperature ....................................................................... 32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)
Screen Size .........................................................................................3.5"
Initial Charging Time ..........................................................................3 Hours
Battery Power Time ............................................................................ 4 Hours
19
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Any changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter. This device and its antenna must not be co-located or operated in conjunction with any other
antenna or transmitter.
IC STATEMENT:
Operation of this device is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to
this equipment. Such modications could void the users authority to operate the equipment.
20
SAFETY INSTRUCTIONS
Read and Keep Instructions: All the safety and operating instructions should be
read before the video baby monitor is operated.
Water and Moisture: This product is designed for indoor use only. The unit should not be exposed to
rain, moisture, dripping or splashing. No objects lled with liquid should be placed on top of, or beside the
product, such as a glass or vase. This item should not be used near water.
Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use.
Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the
ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air
ow.
Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle,
replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct
sunlight.
Power Source: This unit should only be used with the AC power adapters included in this package (rated
6V 800mA)
Damage Requiring Service: This unit should be serviced by qualied personnel only when:
a. Objects have fallen or liquid has been spilled into the product
b. The units have been exposed to rain
c. The units do not appear to operate normally or exhibits a distinct change in performance
d. The units have been dropped or the enclosure damaged
Caution: This product cannot replace responsible adult supervision of a child. You should personally check
your child’s activity at regular intervals.
STATEMENT ON REGULATION
These units are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio or
TV reception. The user is cautioned that changes and modications made to the equipment without the
approval of manufacturer could void the user’s authority to operate this equipment.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Levana LV-TW502 Manuel utilisateur

Catégorie
Moniteurs vidéo bébé
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues