6
ENGLISH
99.973%
82%
80%
HEPA Cartridge Filter
Vacuum Filter
Clean Air Filter Bag
Filtration Systems
Filter Congurations and Maintenance Tips
Conguration Installation Applications Tips
“Clean Air “ Filtration
(Grey Targa Filter)
1. Remove vacuum head from tank.
2. Place Targa lter in tank.
3. Replace vacuum head on tank with the airow
indicator light centered over tank inlet. Align
clamps on the side of tank with tabs on head
and lock clamps.
General dry vacuuming.
(i.e. schools, hotels, oces, etc.)
• To maximize lter life, maintain air quality
and performance, clean lter with soft brush,
shake, or wash in lukewarm water.
• Inspect lter for signs of wear and replace if
necessary.
• For best performance, use with a paper dust
bag installed.
Superior “Clean Air” Filtration
(Grey Targa Filter + Paper Dust
Bag)
1. Remove vacuum head from tank.
2. Unfold dust bag, gently seperate walls of bag,
insert into tank (before placing Targa lter in
place).
3. Slide rubberized bag collar over inlet nozzle.
Ensure collar face is against tank wall.
General dry vacuuming with the convenience
of a bag. (i.e. schools, hotels, oces, etc.)
Excellent for ne dust applications where
blinding of lter is a problem.
(i.e. chalk dust, dry wall dust, lampback, silica
dust, etc.)
• Ensurecollaris on inlet asfaraspossible(if
not, bag may come o).
• Sides of bag should be seperated after
installed in tank to maximize entire bag
volume.
• Grey Targa lter must be in place before
operation.
Optimum “Clean Air” Filtration
(Targa Filter + Paper Dust Bag +
HEPA lter)
1. Remove vacuum head from tank, setting the
head on the side.
2. Place clamp on outer ring of HEPA (do not
tighten until lter is on black oat cage).
Ultra high ltration vacuuming where air
quality is crucial.
(i.e. hospitals, computer areas, areas where
asthmatics and allergy suerers live and work.)
• To maximize lter life, maintain air quality
and peak performance, the HEPA lter
should only be cleaned with a soft brush or
blown clean with compressed air.
• Never wash or expose HEPA lter to water as
this will damage lter material.
• Inspect lter for signs of wear and replace if
necessary.
• Always use with paper dust bag and Targa
lter.
Wet Filtration
(Targa 990 and Targa XL)
WARNING! REMOVE ALL OTHER
FILTERS BEFORE INSTALLING
WET FILTER
1. Remove vacuum head from tank.
2. Remove any other lters.
3. Empty out contents in vacuum tank (rinse out
with water if possible).
4. Place wet lter in tank ensuring black gasket is
free of dirt and sitting at on tank rim.
5. Replace head and lock clamps.
For removal of liquids from carpets and hard
oors. Ideal when picking up liquids after
stripping and rinsing oors and for removal of
slush from entrance walk-o mats in winter.
• After vacuuming liquids, clean by vacuuming
a small amount of clean water. Allow to dry in
a ventilated area.
• To minimize foam build-up, use Dustbane’s
De-Foam in tank.
• For ease of emptying, ll tank to no more
than 3/4 full.
• Do not use for dry application as this will
result in damage to the motor.