Videotec ULISSE Manuel utilisateur

ENGLISH ITALIANO FRANÇAIS DEUTSCH

РУССКИЙ

EN

English - Instructions manual

IT

Italiano - Manuale di istruzioni

FR

Français - Manuel d’instructions

DE

Deutsch - Bedienungslanleitung

RU

 -   

ULISSE

Outdoor P&T for highest precision Day/Night monitoring

EN

English - Instructions manual

ENGLISH

ULISSE

Outdoor P&T for highest precision Day/Night monitoring

Instructions manual - English - EN

3MNVCUPTDMB_1511_EN

Contents

ENGLISH

1 About this manual ......................................................................................................... 7

1.1 Typographical conventions .................................................................................................................................. 7

2 Notes on copyright and information on trademarks .................................................. 7

3 Safety rules..................................................................................................................... 7

4 Identication ................................................................................................................10

4.1 Product description and type designation...................................................................................................10

4.2 Product markings ..................................................................................................................................................10

4.2.1 Checking the markings .......................................................................................................................................................10

5 Versions ........................................................................................................................11

5.1 Integrated wiper ....................................................................................................................................................11

5.2 Integrated Day/Night camera ...........................................................................................................................11

5.3 LED illuminators .....................................................................................................................................................11

5.4 Version with germanium window ...................................................................................................................11

6 Preparing the product for use .................................................................................... 12

6.1 Safety precautions before use ...........................................................................................................................12

6.2 Unpacking ................................................................................................................................................................ 12

6.3 Contents .................................................................................................................................................................... 12

6.4 Safely disposing of packaging material .........................................................................................................12

6.5 Preparatory work before installation .............................................................................................................. 13

6.5.1 Attaching the bracket ..........................................................................................................................................................13

6.5.2 Cables management ............................................................................................................................................................13

7 Assembly ...................................................................................................................... 14

7.1 How to open the housing ................................................................................................................................... 14

7.1.1 How to install the camera ................................................................................................................................................... 14

7.1.1.1 Cameras features ........................................................................................................................................................................................14

7.2 Housing board description ................................................................................................................................15

7.2.1 Connection of the camera and motorised lens ..........................................................................................................15

7.2.2 Adjustment of the supply voltage of the lens motors .............................................................................................16

8 Installation ................................................................................................................... 17

8.1 Connecting the cables to the base ..................................................................................................................17

8.2 Fixing the base to the support ..........................................................................................................................18

8.3 Connector board description ............................................................................................................................ 19

8.4 Connection of the power supply line ............................................................................................................. 20

8.4.1 24Vac power line connection ............................................................................................................................................ 21

8.4.2 120Vac and 230Vac power line connection .................................................................................................................21

8.5 Signal cable connection ...................................................................................................................................... 22

8.5.1 Video cable connection ....................................................................................................................................................... 22

8.5.2 Telemetry lines connections .............................................................................................................................................. 23

8.5.3 Connection of the alarm inputs, of the twilight switch and of the relays .........................................................24

8.6 Fixing the upper body ..........................................................................................................................................25

8.7 LED illuminators installation .............................................................................................................................. 26

EN - English - Instructions manual

4 MNVCUPTDMB_1511_EN

8.7.1 Fitting the bracket .................................................................................................................................................................26

8.7.2 Fitting the illuminator on the bracket ............................................................................................................................ 26

8.8 Connection of the LED illuminators ................................................................................................................ 27

8.9 Connection for cameras and LED illuminators synchronisation...........................................................28

8.10 Desiccant bag .......................................................................................................................................................28

8.11 Setting of the LED illuminators and synchronization mode with the camera ..............................28

8.11.1 Description of the LED illuminator ...............................................................................................................................28

8.11.2 Synchronisation with an external twilight switch ................................................................................................... 29

8.11.3 Synchronising the unit with the LED illuminators ..................................................................................................29

8.11.4 Synchronising the unit with the camera module .................................................................................................... 30

8.11.5 Synchronising the unit with the LED illuminators ..................................................................................................30

8.11.6 Manually activate the LED illuminators ......................................................................................................................31

8.11.7 LED illuminator switching on threshold adjustment .............................................................................................32

8.11.8 LED illuminator power adjustment ..............................................................................................................................32

8.12 Hardware conguration ....................................................................................................................................33

8.12.1 Opening the conguration door ...................................................................................................................................33

8.12.2 DIP1 conguration ..............................................................................................................................................................33

8.12.3 DIP2 conguration ..............................................................................................................................................................33

8.12.4 DIP3 conguration ..............................................................................................................................................................34

8.12.4.1 Address conguration ............................................................................................................................................................................34

8.12.4.2 Setting of the serial communication lines ......................................................................................................................................34

8.12.5 DIP4 conguration ..............................................................................................................................................................34

8.12.6 Installation examples ......................................................................................................................................................... 35

8.12.6.1 RS-485 RX line ............................................................................................................................................................................................ 35

8.12.6.2 RS-422 line (RS-485-1 RX e RS-485-2 TX) ..........................................................................................................................................35

8.12.6.3 Line RS-485-1 reception, line RS-485-2 repetition........................................................................................................................35

8.12.6.4 Two-way RS-485 TX/RX line ..................................................................................................................................................................35

9 Switching on ................................................................................................................36

9.1 First start-up.............................................................................................................................................................36

9.2 Checks list ................................................................................................................................................................. 36

10 Conguration .............................................................................................................37

10.1 OSM interface (On Screen Menu) .................................................................................................................. 37

10.1.1 Using the OSM .....................................................................................................................................................................37

10.1.1.1 How to use the joystick ..........................................................................................................................................................................37

10.1.1.2 How to move around the menus........................................................................................................................................................37

10.1.1.3 How to modify the parameters ...........................................................................................................................................................38

10.1.1.4 How to change the numeric elds ..................................................................................................................................................... 38

10.1.1.5 How to change text .................................................................................................................................................................................39

10.1.2 Conguration via OSM ......................................................................................................................................................40

10.1.3 Main Menu .............................................................................................................................................................................40

10.1.4 Language Selection Menu ............................................................................................................................................... 40

10.1.5 ZFI Parameter Menu ........................................................................................................................................................... 40

10.1.5.1 Zone Titling Menu .................................................................................................................................................................................... 41

10.1.5.2 Zone Masking Menu ...............................................................................................................................................................................42

10.1.6 Housing Serial Port Menu ................................................................................................................................................43

10.1.7 Polarity Menu .......................................................................................................................................................................43

10.1.8 Block Camera menu ...........................................................................................................................................................44

10.1.8.1 Zone Titling Menu .................................................................................................................................................................................... 44

10.1.8.2 Masking Menu ...........................................................................................................................................................................................45

Instructions manual - English - EN

5MNVCUPTDMB_1511_EN

10.1.8.3 Masking Menu (Edit Masks) .................................................................................................................................................................. 45

10.1.8.4 How to create a new mask ....................................................................................................................................................................46

10.1.8.5 How to modify a mask ............................................................................................................................................................................ 47

10.1.8.6 Advanced Setting Menu ........................................................................................................................................................................47

10.1.8.7 Advanced Setting Menu (Zoom) ........................................................................................................................................................48

10.1.8.8 Advanced Setting Menu (Focus) .........................................................................................................................................................48

10.1.8.9 Advanced Setting Menu (Exposure) .................................................................................................................................................. 49

10.1.8.10 Advanced Setting Menu (Infrared) .................................................................................................................................................. 50

10.1.8.11 Advanced Setting Menu (White Balance) .....................................................................................................................................51

10.1.8.12 Advanced Setting Menu (Other) ......................................................................................................................................................51

10.1.9 Movement Menu ................................................................................................................................................................. 52

10.1.9.1 Manual Control Menu ............................................................................................................................................................................. 52

10.1.9.2 Manual Control Menu (Limits) ............................................................................................................................................................. 53

10.1.9.3 Preset Menu ...............................................................................................................................................................................................53

10.1.9.4 Preset Menu (Edit Preset) ......................................................................................................................................................................53

10.1.9.5 Preset Menu (Utility Preset) ..................................................................................................................................................................54

10.1.9.6 Patrol Menu ................................................................................................................................................................................................54

10.1.9.7 Autopan Menu ..........................................................................................................................................................................................54

10.1.9.8 Motion Recall Menu ................................................................................................................................................................................55

10.1.10 Display Menu .....................................................................................................................................................................55

10.1.11 Digital I/O Menu ................................................................................................................................................................ 56

10.1.11.1 Alarms Menu ...........................................................................................................................................................................................56

10.1.11.2 Washer Menu ...........................................................................................................................................................................................57

10.1.12 Default Menu .....................................................................................................................................................................57

10.1.13 Info Menu ............................................................................................................................................................................57

11 Accessories .................................................................................................................58

11.1 Washer ..................................................................................................................................................................... 58

11.1.1 Washing system connection ...........................................................................................................................................58

11.2 Wall mount.............................................................................................................................................................59

11.3 Parapet bracket .................................................................................................................................................... 59

11.4 Power supply with illuminator control ........................................................................................................59

12 Instructions for normal operation ........................................................................... 60

12.1 Visualizing the state of the pan & tilt ............................................................................................................60

12.2 Saving a Preset .....................................................................................................................................................60

12.3 Restore a Preset position (Scan) .....................................................................................................................60

12.4 Recalling the Home position ...........................................................................................................................60

12.5 Patrol enabling .....................................................................................................................................................60

12.6 Autopan enabling ...............................................................................................................................................61

12.7 Enabling the wiper (Wiper) ..............................................................................................................................61

12.8 Enabling the washer (Washer) ........................................................................................................................61

12.9 Enabling the LED illuminator ..........................................................................................................................61

12.10 Unit Reboot .........................................................................................................................................................61

12.11 Special controls .................................................................................................................................................62

12.12 Special congurations.....................................................................................................................................63

13 Maintaining ................................................................................................................ 64

13.1 Fuses replacement .............................................................................................................................................. 64

14 Cleaning ..................................................................................................................... 64

14.1 Window and plastic cover cleaning .............................................................................................................. 64

EN - English - Instructions manual

6 MNVCUPTDMB_1511_EN

14.2 Cleaning the germanium window ................................................................................................................ 64

15 Disposal of waste materials ......................................................................................64

16 Troubleshooting ........................................................................................................ 65

17 Technical data ............................................................................................................ 67

17.1 General .................................................................................................................................................................... 67

17.2 Mechanical .............................................................................................................................................................67

17.3 Electrical/Video ....................................................................................................................................................67

17.4 Camera ....................................................................................................................................................................68

17.5 Communications .................................................................................................................................................69

17.6 Protocols ................................................................................................................................................................. 69

17.7 Environment..........................................................................................................................................................69

17.8 Certications ......................................................................................................................................................... 69

18 Technical drawings .................................................................................................... 70

A Appendix - Address table ........................................................................................... 74

Instructions manual - English - EN

7MNVCUPTDMB_1511_EN

1 About this manual

Before installing and using this unit, please read this

manual carefully. Be sure to keep it handy for later

reference.

1.1 Typographical conventions

DANGER!

High level hazard.

Risk of electric shock. Disconnect the

power supply before proceeding with any

operation, unless indicated otherwise.

DANGER!

Hot surface.

Avoid contact. Surfaces are hot and may

cause personal injury if touched.

DANGER!

Mechanical hazard.

Risk of crushing or shearing.

CAUTION!

Medium level hazard.

This operation is very important for the

system to function properly. Please read

the procedure described very carefully and

carry it out as instructed.

INFO

Description of system specications.

We recommend reading this part carefully

in order to understand the subsequent

stages.

2 Notes on copyright and

information on trademarks

The quoted names of products or companies are

trademarks or registered trademarks.

3 Safety rules

CAUTION! The electrical system to which

the unit is connected must be equipped

with a 20A max automatic bipolar circuit

breaker. This circuit breaker must be of

the Listed type. The minimum distance

between the contacts must be 3mm (0.1in).

The circuit breaker must be provided

with protection against the fault current

towards the ground (dierential) and the

overcurrent (magnetothermal).

CAUTION! Hazardous moving parts. Keep

ngers and other body parts away.

CAUTION! The device must be installed

only and exclusively by skilled technical

personnel.

CAUTION! For continued protection against

risk of re, replace only with same type and

rating of fuse. Fuses must be replaced only

by service personnel.

CAUTION! TNV-1 installation type. The

installation is type TNV-1, do not connect it

to SELV circuits.

CAUTION! In order to reduce the risk of re,

only use UL Listed or CSA certied cables

sizes greater than or equal to 0.13mm² (26

AWG).

• The manufacturer declines all responsibility

for any damage caused by an improper use

of the appliances mentioned in this manual.

Furthermore, the manufacturer reserves the right

to modify its contents without any prior notice.

The documentation contained in this manual has

been collected with great care. The manufacturer,

however, cannot take any liability for its use. The

same thing can be said for any person or company

involved in the creation and production of this

manual.

EN - English - Instructions manual

8 MNVCUPTDMB_1511_EN

• Before starting any operation, make sure the

power supply is disconnected.

• Do not use cables that seem worn or old.

• Never, under any circumstances, make any

changes or connections that are not shown in

this handbook. Improper use of the appliance

can cause serious hazards, risking the safety of

personnel and of the installation.

• Use only original spare parts. Non-original spare

parts could cause re, electrical discharge or other

hazards.

• Before proceeding with installation, check the

supplied material to make sure it corresponds

to the order specication by examining the

identication labels (4.2 Product markings, page

10).

• This device was designed to be permanently

installed on a building or on a suitable structure.

The device must be installed permanently before

any operation.

• Installation category (also called Overvoltage

Category) species the level of mains voltage

surges that the equipment will be subjected to.

The category depends upon the location of the

equipment, and on any external surge protection

provided. Equipment in an industrial environment,

directly connected to major feeders/short branch

circuits, is subjected to Installation Category III. If

this is the case, a reduction to Installation Category

II is required. This can be achieved by use of an

insulating transformer with an earthed screen

between primary and secondary, or by tting

listed Surge Protective Devices (SPDs) from live

to neutral and from neutral to earth. Listed SPDs

shall be designed for repeated limiting of transient

voltage surges, suitable rated for operating voltage

and designated as follows: Type 2 (Permanently

connected SPDs intended for installation on the

load side of the service equipment overcurrent

device); Nominal Discharge Current (In) 20kA min.

For example: FERRAZ SHAWMUT, STT2240SPG-

CN, STT2BL240SPG-CN rated 120Vac/240Vac,

(In=20kA). Maximum distance between installation

and reduction is 5m.

• Use a Class 2 listed UL tranformer, compliant with

the Standards in force, only for products marked

UL, powered at 24Vac.

• A disconnecting device, readily and easily

accessible, must be incorporated in the electrical

system of the building for rapid intervention.

• The separate protective earthing terminal provided

on this product shall be permanently connected

to earth.

• Connect the device to a power source

corresponding to the indications given on the

marking label. Before proceeding with installation

make sure that the power line is properly isolated.

The supply voltage should never exceed the limit

(±10%).

• Power supply must be provided with a SELV type,

24Vac, 8A isolated source derived from a double

isolation UL Listed transformer specially protected

in output.

• The device should be mounted so that it is

accessible only to the technician/installer because

the moving parts constitute a residual risk of injury

caused by movement of said parts.

• Attach the Dangerous Moving Parts label near the

device. (Fig. 6, page12).

• Do not use the appliance in the presence of

inammable substances.

• To connect the power supply line use the

appropriate junction-box (UPTJBUL). For further

information, refer to the product use and

installation manual.

Instructions manual - English - EN

9MNVCUPTDMB_1511_EN

• Do not allow children or unauthorised people to

use the appliance.

• The appliance should only be considered switched

o when the power supply has been disconnected

and the connecting cables to other devices have

been removed.

• Only skilled personnel should carry out

maintenance on the device. When carrying out

maintenance, the operator is exposed to the risk of

electrocution and other hazards.

• Use only the accessories indicated by the

manufacturer. Any change that is not expressly

approved by the manufacturer will invalidate the

guarantee.

• Connect the coaxial cable to earth.

• Before connecting all the cables make sure the

device is properly connected to the earth circuit.

• If the device has to be removed from the

installation, always disconnect the earth cable last.

• Take all necessary precautions to prevent the

apparatus from being damaged by electrostatic

discharge.

• The unit has been made for connection using a

3-pole cable. To make a correct connection to

the earth circuit, follow the instructions in this

handbook.

• Handle the unit with great care, high mechanical

stress could damage it.

• Make especially sure that the power supply line is

insulated at a sucient distance from all the other

cables, including lightning protection devices.

• If it is necessary to transport the device, this should

be done with great care. Abrupt stops, bumps and

violent impact could damage the unit or injure the

user.

EN - English - Instructions manual

10 MNVCUPTDMB_1511_EN

4 Identication

4.1 Product description and type

designation

ULISSE ensures maximum surveillance coverage in

all outdoor environments, even the most dicult. It

can operate 24 hours a day in demanding security

applications, without requiring maintenance work.

This model can contain cameras with compact lenses.

The accurate top-mount construction ensures vision

beyond the horizon and the continuous rotation on

the horizontal axis, combining high speed to absolute

tracking accuracy, both in manual mode and in patrol

mode.

The versions with the integrated camera ensure

excellent image quality, even in poorly lit

environments.

To ensure detailed images even during the night

hours, versions are available with LED illuminators,

with infrared light or white light.

The PTZ unit can be equipped with a wiper for

removing rain and dust from the front glass; there

is a wide selection of jerry cans with washer pump,

dierent capacities and heads.

The optimal operation is ensured in very

hot environments up to 60°C or in very cold

environments up to -30°, thanks to optional

enhanced heating.

Models are available for vision with a thermal camera.

4.2 Product markings

Pan & tilt devices have a label complying

with CE markings.

Fig. 1

The label shows:

• Model identication code (Extended 3/9 bar code).

• Power supply (Volt).

• Frequency (Hertz).

• Current consumption (Amps).

• Weatherproof standard (IP).

• Serial number.

4.2.1 Checking the markings

Before proceeding further with installation, make

sure the material supplied corresponds to the order

specication by examining the marking labels.

Never, under any circumstances, make any changes

or connections that are not shown in this handbook.

Improper use of the appliance can cause serious

hazards, risking the safety of personnel and of the

installation.

Instructions manual - English - EN

11MNVCUPTDMB_1511_EN

5 Versions

5.1 Integrated wiper

The product can be equipped with a wiper.

Fig. 2

For further information refer to the relative

chapter (12.7 Enabling the wiper (Wiper),

page61).

The P&T can be equipped with an external pump that

supplies water for the glass to be cleaned.

For further information refer to the relative

chapter (11.1 Washer, page58).

5.2 Integrated Day/Night camera

Available version with SONY block camera, which

combines an incredible optical zoom ensuring a

high sensitivity in poorly lighted environments. The

camera features a wide excursion angle of view.

Fig. 3

5.3 LED illuminators

The version with LED illuminators can only

powered at 24Vac.

The pan & tilt can be tted with bracket for 2

VIDEOTEC LED illuminators for night surveillance

(illuminators not included).

Fig. 4

For further information refer to the relative

chapter (8.7 LED illuminators installation,

page26).

5.4 Version with germanium

window

The version with germanium window has been

developed for applications with thermal cameras.

Fig. 5

EN - English - Instructions manual

12 MNVCUPTDMB_1511_EN

6 Preparing the product for

use

Any change that is not expressly approved

by the manufacturer will invalidate the

guarantee.

The unit must not be dismantled or

tampered with. The only exceptions

are those concerning the assembly and

maintenance operations stipulated in this

manual.

6.1 Safety precautions before use

The appliance includes moving parts. Make

sure that the unit is positioned where it

is inaccessible under normal operating

conditions. Attach the warning label

supplied with the appliance, placing it near

the unit so that it can be seen easily.

Fig. 6

6.2 Unpacking

When the product is delivered, make sure that the

package is intact and that there are no signs that it

has been dropped or scratched.

If there are obvious signs of damage, contact the

supplier immediately.

Keep the packaging in case you need to send the

product for repairs.

Unpack the sunshield of the device, taking

care not to damage the housing.

6.3 Contents

Check the contents to make sure they correspond

with the list of materials as below:

• Positioning unit

• Power supply base

• Accessories package:

• Serial adapter

• Serial extension cable

• Allen wrenches

• Spacers (not available in the version with

integrated camera)

• Label

• Ties

• Silicon sheath

• Reduction gaskets for cable glands

• Instructions manual

• Attachment plate for desiccant bag (not

available in the versions with LED illuminators)

• Desiccant bag

• Bolts and screws

• Bracket for attachment of LED illuminators

(available in the versions with LED illuminators)

• Sunshield

6.4 Safely disposing of packaging

material

The packaging material can all be recycled. The

installer technician will be responsible for separating

the material for disposal, and in any case for

compliance with the legislation in force where the

device is to be used.

When returning a faulty product we recommend

using the original packaging for shipping.

Instructions manual - English - EN

13MNVCUPTDMB_1511_EN

6.5 Preparatory work before

installation

6.5.1 Attaching the bracket

Dierent types of supports are available (11

Accessories, page58). Choose a suitable bracket for

the installation and follow all the instructions in the

suggested chapter.

Take special care when attaching and

fastening down the apparatus. The

clamping system must be able to support

at least 4 times the weight of the entire

equipment, including P&T, lenses and

camera.

The device should be assembled vertically.

Any other position could impair the

performance of the appliance.

Do not attach the device upside down.

6.5.2 Cables management

The connection cables should not be

accessible from the outside. It is necessary

to fasten the cables securely to the support

in order to prevent excessive weight pulling

them out accidentaly.

You must use cables suited to the type of

installation.

Insert the cables into the support so that they

protrude by about 50cm.

50cm50cm

Fig. 7

EN - English - Instructions manual

14 MNVCUPTDMB_1511_EN

7 Assembly

7.1 How to open the housing

Loosen the 2 screws on the side, turn the cover and

the upper half of the body about the opening hinge

axis.

Fig. 8

After installation and wiring, close the

product again.

7.1.1 How to install the camera

It is necessary to insulate the camera body

from the attachment slide in order to

prevent interference with the video signal.

Take out the inner support slide (01) loosening the

fastening screws (02). Fasten the camera with the 1/4"

screw (03). Adjust the internal slide so that the lens

and camera are positioned correctly.

Fasten down the adjustable slide in the correct

position using the appropriate screws. When

positioning the camera use also the spacers supplied

for this purpose (04).

04

02

01

03

Fig. 9

Reposition the internal slide and tighten the screws

that had been loosened previously.

7.1.1.1 Cameras features

The correct operation of the equipment,

within the temperature range indicated, is

guaranteed only if you use camera and lens

with temperature limits equal to at least

-10°C and + 60°C.

• The power supply voltage of the camera must be

12Vdc.

• The maximum absorbed current by the camera

must be less than 800mA.

• The camera output video signal must be of the

composite type with amplitude 1Vpp (negative

sync).

Instructions manual - English - EN

15MNVCUPTDMB_1511_EN

7.2 Housing board description

BOARD DESCRIPTION

Connector/Terminal Function

CN1 BNC connector, video signal from

the camera

CN2 Motorised lens motor control

connector

CN3 Motorised lens potentiometer

connector

CN6 Serial connector for controlling

the camera

CN7 Camera power supply, dry contact

for activating the Day/Night came-

ra mode, additional lines

DIP1 Select the lens power supply

voltage

Tab. 1

CN6

CN3

CN2

CN1

CN7

DIP1

Fig. 10

7.2.1 Connection of the camera and

motorised lens

All connections illustrated below should

be made only and exclusively by expert

installers who should comply with all the

wiring and power supply specications for

the devices.

The electronics board is designed to control cameras

with motorised lenses (Focus, Iris, Zoom), which

may or may not have potentiometers to control the

position reached.

Before making the connections make sure that the

voltages supplied by the board fall within the limits

allowed for the apparatus.

CONNECTOR FOR CAMERA/MOTORISED LENSES

Voltage Current Description

+12V 800mA max Camera power

supply

+5V 15mA max Lens potentiome-

ter power supply

From 6Vdc up to

15Vdc (adjustable)

200mA max

(Focus+Zoom+Iris)

Lens motor power

supply

Tab. 2

EN - English - Instructions manual

16 MNVCUPTDMB_1511_EN

Lenses with reverse polarity motors: Implement

the connections, as shown in the gure..

FOCUS +

FOCUS -

IRIS +

IRIS -

ZOOM +

ZOOM -

+

M

+

M

+

M

CN2

Fig. 11 CN2.

Lenses with common wire motors: Implement the

connections, as shown in the gure..

FOCUS +

FOCUS -

IRIS +

IRIS -

ZOOM +

ZOOM -

+

M

+

M

+

M

CN2

Fig. 12 CN2.

Potentiometers: Implement the connections, as

shown in the gure..

+ POT

FOCUS

IRIS

ZOOM

- POT

GND

CN3

IRIS

ZOOM

FOCUS

Fig. 13 CN3.

Camera: Implement the connections, as shown in

the gure..

CN6

232 TX

232 RX

GND

485_B

485_A

S_GND

+ 12V

GND

F1

F2

CN1

Serial

Day/Night synchroni-

sation

Power supply

Video

Fig. 14

Refer to the relative chapter to enable camera control

(10.1.6 Housing Serial Port Menu, page43).

7.2.2 Adjustment of the supply voltage

of the lens motors

Before powering the Pan & Tilt, select the lens power

voltage using DIP1 (7.2 Housing board description,

page15).

ADJUSTMENT OF THE SUPPLY VOLTAGE OF THE LENS

MOTORS

SW1 SW2 Voltage

OFF OFF 15Vdc

ON OFF 12Vdc

OFF ON 9Vdc

ON ON 6Vdc

Tab. 3

Instructions manual - English - EN

17MNVCUPTDMB_1511_EN

8 Installation

Never, under any circumstances, make

any changes or connections that are not

shown in this handbook. Failure to follow

the connection instructions that are given

in the handbook may create serious safety

hazards for people and for the installation.

Do not change the wiring in the product

as it is supplied to you. Failure to follow

this instruction may create serious safety

hazards for people and for the installation,

and will also invalidate the guarantee.

If using the washer kit, the nozzle support

should be installed before positioning

the pan & tilt and the wiring. For further

explanations see the specic handbook for

the kit.

Fig. 15

Inside the bottom cover there is a desiccant

bag that is used to prevent moisture

formation in the base and near the

connector boards. Remove the bag before

installation.

8.1 Connecting the cables to the

base

Insert the cables into the cable glands holding the

base at about 20cm from the support. Tighten the

cable glands. The cable glands are suitable for cables

with a diameter between 5mm and 10 mm.

Fig. 16

Pay attention to the xing. Tightening

torque: 5Nm.

For cables diameter from 3mm to 7mm use

the supplied gaskets.

Fig. 17

EN - English - Instructions manual

18 MNVCUPTDMB_1511_EN

8.2 Fixing the base to the support

Use the screws and the washers supplied

with the base.

Once you have positioned the gasket (01), x the

base (02) onto the bracket (03) with screws (04),

serrated washers (05) and screw rings (06).

01

03

06

05

04

02

Fig. 18

01

03

06

05

04

02

Fig. 19

Align the 3 notches on the base with those on the

support as shown in the following gure.

Fig. 20

Apply a thread-locker on the holes of the

screws (Loctite 243®).

Pay attention to the xing. Tightening

torque: 4Nm.

Tab. 4

La page charge ...

Videotec ULISSE Manuel utilisateur

Videotec ULISSE Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents