Winmate R19IB3S-67A1 Quick Start Manuals

Please read these instructions carefully before using this product, and save this guide for future use.

Full IP67 Stainless

Resistive Panel PC

Intel® Celeron® Bay Trail-M N2930 1.83 GHz

R10IB3S-67T2

R15IB3S-67C3

R19IB3S-67A1

Quick Start Guide

V1.0

For more information on this and

other Winmate products, please

visit our website at:

www.winmate.com

Document Part Number: 9152111I102Q

- 2 -

Contents

1 INTRODUCTION - 7 -

1.1 Features - 7 -

1.2 Package Contents - 8 -

1.3 Product Overview - 9 -

1.3.1 Dimensions 10.4" - 9 -

1.3.2 Dimensions 15” - 9 -

1.3.3 Dimensions 19” - 10 -

1.4 Connectors - 11 -

1.4 Physical Buttons and LED Indicators - 12 -

2 GETTING STARTED - 13 -

2.1 Turning on Your Device - 13 -

2.2 How to Enable Watchdog - 14 -

2.3 Turning off Your Device - 15 -

3 INSTALLATION - 16 -

3.1 Wiring Requirements - 16 -

3.2 Connector Pin Assignment - 17 -

3.2.1 Power Cable - 17 -

3.2.2 Serial Cable - 18 -

3.2.3 Ethernet Cable - 19 -

3.2.4 USB 2.0 Cable - 20 -

3.3 Mounting - 21 -

3.3.1 VESA Mounting - 21 -

3.3.2 Yoke Mounting - 22 -

4 SPECIFICATIONS - 23 -

APPENDIX A: Cleaning the Monitor - 25 -

Appendix B: Winmate Software Development Kit - 26 -

Appendix C: Ordering Information - 26 -

- 3 -

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two

conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/

A2:2013

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

- 4 -

Copyright Notice

No part of this document may be reproduced, copied, translated, or

transmitted in any form or by any means, electronic or mechanical, for

any purpose, without the prior written permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of

their respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to

any product, including circuits and/or software described or contained

in this manual in order to improve design and/or performance. We

assume no responsibility or liability for the use of the described

product(s) conveys no license or title under any patent, copyright, or

masks work rights to these products, and make no representations or

warranties that these products are free from patent, copyright, or

mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We

make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be

free from material and workmanship defects for a period of one year

from the invoice date. If the customer discovers a defect, we will, at

his/her option, repair or replace the defective product at no charge to

the customer, provide it is returned during the warranty period of one

year, with transportation charges prepaid. The returned product must

be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by

over 30 days, the in-warranty service will be made according to the

shipping date. In the serial numbers the third and fourth two digits

give the year of manufacture, and the fifth digit means the month (e.

g., with A for October, B for November and C for December).

For example, the serial number 1W17Axxxxxxxx means October of

year 2017.

- 5 -

Customer Service

We provide a service guide for any problem by the following steps:

First, visit the website of our distributor to find the update information

about the product. Second, contact with your distributor, sales

representative, or our customer service center for technical support if

you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers

every business day. We are always ready to give advice on

application requirements or specific information on the installation and

operation of any of our products.

- 6 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden

power surges. Only experienced electronics personnel

should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis

lorsque vous travaillez sur celui-ci. Ne pas brancher de

connections lorsque l’alimentation est présente. Des

composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement

du personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge

before touching the CPU card. Modern electronic devices

are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place

all electronic components in a static-dissipative surface

or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute

charge statique avant de toucher la carte CPU. Les

équipements électroniques moderns sont très sensibles

aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer

toutes les composantes électroniques sur une surface

conçue pour dissiper les charge, ou dans un sac anti-

statique lorsqu’elles ne sont pas dans le chassis.

- 7 -

1 INTRODUCTION

Congratulations on purchasing Winmate® IP67 Stainless Resistive

Panel PC. Winmate® IP67 Stainless Resistive Panel PC is rugged,

industrial-grade panel PC series built to withstand challenging

environments, undergoing rigorous testing to ensure safety and top

performance. All of the models in the series are sealed to IP67

standard. Stainless housing features anti-corrosion properties making

it suitable for food, chemical and pharmaceutical industries.

Winmate® IP67 Stainless Resistive Panel PC goes beyond that of the

standard industrial panel computers with rugged construction,

powerful performance, and flexible mounting options.

1.1 Features

Winmate® IP67 Stainless Resistive Panel PC features:

 10.4”, 15” and 19”

 Intel® Celeron Bay Trail-M N2930 1.83 GHz Processor

 Fanless Design

 Full IP67 dust and water resistant

 Stainless Housing with anti-corrosion treatment

 Optical Bonding with anti-moisture treatment

 Various mounting solutions: Yoke mount and VESA mount

 5 Wire Resistive Touch (Optional)

- 8 -

1.2 Package Contents

Carefully remove the box and unpack your device. Please check if all

the items listed below are inside your package. If any of these items

are missing or damaged contact us immediately.

Standard factory shipment list:

Panel PC

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

Varies by product

specifications

9152111I102Q

IB32: 9171111I101Y

AC Adapter

Power Cable

Serial Cable

50W:90PO12050002

80W:90PO12080003

Varies by country

94G0103090Q0

Ethernet Cable

USB Cable

VESA Screws

94I0080080KF

9480108080Q0

913511101101

- 9 -

1.3 Product Overview

This section contains mechanical drawing of the Panel PC. Notice

that this is a simplified drawing and some components are not marked

in detail.

1.3.1 Dimensions 10.4"

Unit: mm

1.3.2 Dimensions 15”

Unit: mm

- 10 -

1.3.3 Dimensions 19”

Unit: mm

- 11 -

1.4 Connectors

IP67 Stainless Resistive Panel PC has IP67 type connectors with

protection cap.

- 12 -

1.4 Physical Buttons and LED Indicators

Physical buttons and LED indicators located on the rear side of the

Panel PC.

Physical Buttons

Icon

Button

Description

Reset

Press to reset the system

Power On/

Off

Press to power on or power off the

device

LED Indicators

LED Type

Status

Description

On

Power is on

Off

Power is off

Blinking

Storage activity

(Data is being read or written)

Off

System is idle

- 13 -

2 GETTING STARTED

2.1 Turning on Your Device

Follow the following steps to turn on your device:

1. Connect the AC adapter to the DC-in jack connector located

on the back side of the Panel PC.

2. Connect the power cord to AC adapter.

3. Plug the power cord to the AC outlet and the device will turn

on automatically.

AC Adapter specifications vary by panel size.

Size

10.4”

15”

19”

AC Adapter

12V/ 50W

12V/ 80W

Power

Consumption*

33W (typ.)

38W (typ.)

45W (typ.)

*With maximum backlight and high CPU load.

- 14 -

2.2 How to Enable Watchdog

To enable Watchdog, you need to download Winmate Watchdog

utility. Find more information on Watchdog in “Watchdog Guide” that

you can download from Winmate Download Center or File Share.

Refer to the User Manual for more details.

To enable watchdog in Watchdog AP follow the instructions below:

1. On the right bottom side of the desktop screen, click triangle

button to show hidden icons.

2. Click icon to open Watchdog utility.

3. In Watchdog utility window set countdown time and periodically

feed time, or disable watchdog.

Example:

Every 10 min watchdog will

monitor the system, in case

any error occurs the system

will restart automatically when

the countdown time reaches

0.

Every 9 min watchdog timer

will be reset to 10 min.

- 15 -

Settings

Description

Watchdog Countdown

Time

The system automaticity restarts when

this countdown time reaches zero.

Default: 10 min

Periodically Feed Time

To set a cycle time to automatically reset

watchdog timer.

Default: 9 min

Enable / Disable

Enable or disable watchdog.

Default: Enable

2.3 Turning off Your Device

To shut down your device, do the following:

Tap Start ( ) > Shut down.

Wait for your Panel PC to completely turn off before disconnecting the

power cord (if necessary).

- 16 -

3 INSTALLATION

3.1 Wiring Requirements

The following common safety precautions should be observed before

installing any electronic device:

 Strive to use separate, non-intersecting paths to route power

and networking wires. If power wiring and device wiring paths

must cross make sure the wires are perpendicular at the

intersection point.

 Keep the wires separated according to interface. The rule of

thumb is that wiring that shares similar electrical characteristics

may be bundled together.

 Do not bundle input wiring with output wiring. Keep them

separate.

 When necessary, it is strongly advised that you label wiring to

all devices in the system.

CAUTION

 Do not run signal or communication wiring and power wiring in

the same conduit. To avoid interference, wires with different

signal characteristics (i.e., different interfaces) should be routed

separately.

 Be sure to disconnect the power cord before installing and/or

wiring your device.

 Verify the maximum possible current for each wire gauge,

especially for the power cords. Observe all electrical codes

dictating the maximum current allowable for each wire gauge.

 If the current goes above the maximum ratings, the wiring could

overheat, causing serious damage to your equipment.

- 17 -

 Be careful when handling the unit. When the unit is plugged in,

the internal components generate a lot of heat which may leave

the outer casing too hot to touch.

3.2 Connector Pin Assignment

This Panel PC is equipped with four connectors which are IP67 level

and fool-proofing design. Use only the cables that are included in the

package. The pin assignments of the cables are as follows.

3.2.1 Power Cable

The IP67 Stainless Resistive Panel PC has IP67 connector. Use

power cable to connect Panel PC to the source of power.

IP67 Stainless Resistive Panel PC supports 12V DC power input.

- 18 -

3.2.2 Serial Cable

The IP67 Stainless Resistive Panel PC has IP67 serial port connector.

Use serial cable to connect serial interfaces.

- 19 -

3.2.3 Ethernet Cable

The IP67 Stainless Resistive Panel PC has IP67 Ethernet connector.

Use Ethernet cable to connect the Panel PC to the Internet.

- 20 -

3.2.4 USB 2.0 Cable

The IP67 Stainless Resistive Panel PC has one Full IP67 USB2.0

connector. Use USB2.0 cable to connect external devices such as

mouse or keyboard to the Panel PC.

La page charge ...

Winmate R19IB3S-67A1 Quick Start Manuals

Ce manuel convient également à

Winmate R19IB3S-67A1 Quick Start Manuals

dans d''autres langues

Documents connexes

Autres documents