JVC KD-R611E Le manuel du propriétaire

FRANÇAIS

ENGLISH

GET0640-003A

[E/EU]

EN, FR

For canceling the display demonstration, see page 4. / Pour annuler la démonstration des

affichages, référez-vous à la page 4.

CD RECEIVER / RÉCEPTEUR CD

KD-R611

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

For installation and connections, refer to the separate manual. / Pour l’installation et les

raccordements, se référer au manuel séparé.

Dear Customer,

This apparatus is in conformance with the valid

European directives and standards regarding

electromagnetic compatibility and electrical safety.

European representative of Victor Company of

Japan, Limited is:

JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg

Germany

Cher(e) client(e),

Cet appareil est conforme aux directives et normes

européennes en vigueur concernant la compatibilité

électromagnétique et à la sécurité électrique.

Représentant européen de la société Victor

Company of Japan, Limited:

JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg

Allemagne

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

CoverRear_KD-R611_003A_2.indd 1-2CoverRear_KD-R611_003A_2.indd 1-2 11/4/09 5:25:54 PM11/4/09 5:25:54 PM

2 ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with

optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the unit while driving,

be sure to look around carefully or you may be

involved in a traffic accident.

For safety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating

the unit.

Information for Users on Disposal of

Old Equipment and Batteries

[European Union only]

These symbols indicate that the product and

the battery with this symbol should not be

disposed as general household waste at its

end-of-life.

If you wish to dispose of this product and

the battery, please do so in accordance with

applicable national legislation or other rules

in your country and municipality.

By disposing of this product correctly, you

will help to conserve natural resources and

will help prevent potential negative effects

on the environment and human health.

Notice:

The sign Pb below the symbol for batteries

indicates that this battery contains lead.

Products

Battery

EN02-11_KD-R611_003A_1.indd 2EN02-11_KD-R611_003A_1.indd 2 10/27/09 11:46:16 AM10/27/09 11:46:16 AM

3ENGLISH

CONTENTS

3 How to read this manual

3 How to attach/detach the control

panel

3 How to reset your unit

3 How to forcibly eject a disc

4

Canceling the display

demonstration

4 Setting the clock

5 Preparing the remote controller

(RM-RK50)

6 Basic operations

7 Listening to the radio

10 Listening to a disc

11 Listening to the USB device

12 Using Bluetooth ® devices

14 Using a Bluetooth mobile phone

15 Using a Bluetooth audio player

17 Listening to the iPod/iPhone

19 Listening to the DAB tuner

21 Listening to the other external

components

22 Selecting a preset sound mode

23 Menu operations

30 More about this unit

34 Maintenance

35 Troubleshooting

40 Specifications

How to read this manual

The following icons/symbols are used to

indicate:

Press and hold the button(s)

until the desired operation

begins.

Turn the control dial.

Turn the control dial

to make a selection,

then press to confirm.

(

XX)

Reference page number

<XXXX> Menu setting item

Continued on the next page

How to attach/detach the control

panel

How to reset your unit

Your preset adjustments

will also be erased (except

the registered Bluetooth

device). ( 13)

How to forcibly eject a disc

• You can forcibly eject the loaded disc even

if the disc is locked. To lock/unlock the disc,

10.

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

[Hold]

EN02-11_KD-R611_003A_3.indd 3EN02-11_KD-R611_003A_3.indd 3 12/4/09 5:59:37 PM12/4/09 5:59:37 PM

4 ENGLISH

1 Turn on the power.

2

3

Setting the clock

4 Select <DEMO OFF>.

5

6 Finish the procedure.

Canceling the display demonstration

(Initial setting)

[Hold]

6 Adjust the minute.

7 Select <24H/12H>.

8 Select <24 HOUR> or

<12 HOUR>.

9 Finish the procedure.

1 Turn on the power.

2

3 Select <CLOCK>.

4 Select <CLOCK SET>.

5 Adjust the hour.

(Initial setting)

[Hold]

EN02-11_KD-R611_003A_1.indd 4EN02-11_KD-R611_003A_1.indd 4 10/27/09 11:46:17 AM10/27/09 11:46:17 AM

5ENGLISH

Warning (to prevent accidents and

damage):

• Do not install any battery other than CR2025

or its equivalent.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct

sunlight for a long time.

• Store the battery in a place where children

cannot reach.

• Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

• Do not poke the battery with tweezers or

similar tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

This unit is equipped with the steering wheel

remote control function.

Before operating, connect a JVC's OE remote

adapter (not supplied) which matches your car

to the steering wheel remote input terminal on

the rear of the unit.

• For details, refer also to the instructions

supplied with the remote adapter.

Preparing the remote controller (RM-RK50)

When you use the remote controller for the first

time, pull out the insulation sheet.

If the effectiveness of the remote controller

decreases, replace the battery.

Replacing the lithium coin battery

CR2025

Caution:

• Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

• Battery shall not be exposed to excessive heat

such as sunshine, fire, or the like.

Insulation sheet

EN02-11_KD-R611_003A_1.indd 5EN02-11_KD-R611_003A_1.indd 5 10/27/09 11:46:18 AM10/27/09 11:46:18 AM

6 ENGLISH

Basic operations

Control dial

Ejects the disc

Loading slot USB (Universal Serial Bus) input jack

Display window

Auxiliary

input jack

Detaches the panel

When you press or hold the following button(s)...

Main unit

Remote

controller

General operation

Turns on.

• When the power is on, pressing /I/ATT on the remote controller

also mutes the sound or pauses. Press /I/ATT again to cancel

muting or resume playback.

Turns off if pressed and held.

Selects the available sources (if the power is turned on).

• If the source is ready, playback also starts.

Adjusts the volume level.

— Selects items.

—

• Mutes the sound while listening to a source. If the source is “CD,”

“USB” or “USB-IPOD,” playback pauses. Press the control dial again

to cancel muting or resume playback.

• Confirms selection.

Selects the sound mode.

• Enters tone level adjustment directly ( 22) if pressed and held

EQ/BASS-TRE on the main unit.

Remote sensor

• DO NOT expose to bright sunlight.

EN02-11_KD-R611_003A_1.indd 6EN02-11_KD-R611_003A_1.indd 6 10/27/09 2:48:30 PM10/27/09 2:48:30 PM

7ENGLISH

Manual search

“M” flashes, then press

the button repeatedly.

When an FM stereo broadcast is

hard to receive

1

2

]

<TUNER>

]

<MONO>

]

Reception improves, but stereo effect

will be lost.

To restore the stereo effect, repeat the same

procedure to select <MONO OFF>.

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

1

2

]

<TUNER>

]

<SSM>

]

<SSM 01 – 06> / <SSM 07 – 12> /

“SSM” flashes and local stations with

the strongest signals are searched and

stored automatically.

To preset another 6 stations, repeat the above

procedure by selecting one of the other 6 SSM

setting ranges.

Main unit

Remote

controller

General operation

—

• Enters <COLOR> setting directly (

28).

•

Enters <COLOR SETUP> setting directly ( 29) if pressed and held.

—

• Activates/deactivates TA Standby Reception.

• Enters PTY Searching mode if pressed and held.

• Returns to the previous menu.

—

Power off : Checks the current clock time.

Power on : Changes the display information.

[Hold]

Listening to the radio

~

]

“FM” or “AM”

Ÿ

“ST” lights up when receiving an FM stereo broadcast

with sufficient signal strength.

EN02-11_KD-R611_003A_1.indd 7EN02-11_KD-R611_003A_1.indd 7 10/27/09 2:48:31 PM10/27/09 2:48:31 PM

8 ENGLISH

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6

stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset

number “04.”

1

]

“92.50MHz”

2

“PRESET MODE” flashes.

3

]

Selects preset number “04.”

“P04” flashes and “MEMORY” appears.

Selecting a preset station

or

1

2

Changing the display information

Frequency

=

Clock

=

(back to

the beginning)

Using the remote controller

5

U

/

D

∞

: Changes the preset

stations

2

R

/

F

3

: Searches for stations

[Hold]

The following features are available

only for FM Radio Data System stations.

Searching for your favourite

FM Radio Data System

programme—

PTY Search

You can tune in to a station broadcasting your

favourite programme by searching for a PTY

code.

1

The last selected PTY code appears.

2

]

Select one of your favourite

programme types or a PTY code, and

start searching.

If there is a station broadcasting a

programme of the same PTY code as you

have selected, that station is tuned in.

PTY codes: NEWS, AFFAIRS, INFO, SPORT,

EDUCATE, DRAMA, CULTURE, SCIENCE,

VARIED, POP M (music), ROCK M (music),

EASY M (music), LIGHT M (music), CLASSICS,

OTHER M (music), WEATHER, FINANCE,

CHILDREN, SOCIAL, RELIGION, PHONE IN,

TRAVEL, LEISURE, JAZZ, COUNTRY,

NATION M (music), OLDIES, FOLK M (music),

DOCUMENT

[Hold]

EN02-11_KD-R611_003A_1.indd 8EN02-11_KD-R611_003A_1.indd 8 10/28/09 9:53:38 AM10/28/09 9:53:38 AM

9ENGLISH

Standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

any source other than AM.

• The volume changes to the preset TA volume

level if the current level is lower than the

preset level. (<TA VOLUME>,

24)

To activate TA Standby Reception

If the TP indicator lights up, TA

Standby Reception is activated.

If the TP indicator flashes, TA

Standby Reception is not yet

activated.

• To activate the reception, tune in to another

station providing Radio Data System signals

required for TA Standby Reception.

• To deactivate the reception, press

T/P BACK

again.

PTY Standby Reception

PTY Standby Reception allows the unit to

switch temporarily to your favourite PTY

programme from any source other than AM.

To activate and select your favourite

PTY code for PTY Standby Reception, see

<PTY-STANDBY> (

24)

If the PTY indicator lights up, PTY Standby

Reception is activated.

If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

• To activate the reception, tune in to another

station providing these signals.

• To deactivate the reception, select <PTY OFF>

( 24) for the PTY code. The PTY indicator

goes off.

• When a DAB tuner is connected, TA/PTY

Standby Reception also searches for services

( 20).

• The unit will not switch to Traffic

Announcement or PTY programme when

a call connection is established through

“BT-PHONE.”

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is

not sufficient enough, this unit automatically

tunes in to another FM Radio Data System

station of the same network, possibly

broadcasting the same programme with

stronger signals.

Programme A broadcasting on different

frequency areas (01 – 05)

To change the Network-Tracking Reception

setting, see <AF-REG> ( 24).

• When the DAB tuner is connected, refer to

“Tracing the same programme—Alternative

Frequency Reception (DAB AF),” ( 20).

Automatic station selection—

Programme Search

Usually when you select a preset number, the

station preset in that number is tuned in.

If the signals from the FM Radio Data System

preset station are not sufficient for good

reception, this unit, using the AF data, tunes in

to another frequency possibly broadcasting the

same programme as the original preset station

is broadcasting. (<P-SEARCH>,

24)

Changing the display information

Station name (PS)

=

Station

Frequency

=

Programme

type (PTY)

=

Clock

=

(back to

the beginning)

EN02-11_KD-R611_003A_3.indd 9EN02-11_KD-R611_003A_3.indd 9 11/24/09 4:38:49 PM11/24/09 4:38:49 PM

10 ENGLISH

Stopping playback and ejecting

the disc

“NO DISC” appears.

Press /

SOURCE

to listen to

another playback source.

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Selects folder of the MP3/WMA

Selects track

Fast-forwards or

reverses the track

Selecting a track/folder

For MP3/WMA discs, select the desired folder,

then the desired track by repeating the control

dial procedures.

• If the MP3/WMA disc contains many tracks,

you can fast search (±10, ±100, ±1000)

through the disc by turning the control dial

quickly.

• To return to the previous menu, press

T/P BACK

.

Caution on volume setting:

Discs produce very little noise compared with

other sources. Lower the volume before playing

a disc to avoid damaging the speakers by the

sudden increase of the output level.

Selecting the playback modes

You can use only one of the following playback

modes at a time.

1

2

]

“REPEAT”

j

“RANDOM”

3

REPEAT

TRACK RPT : Repeats current track

FOLDER RPT : Repeats current folder

RANDOM

FOLDER RND : Randomly plays all tracks

of current folder, then

tracks of next folders

ALL RND : Randomly plays all tracks

To cancel repeat play or random play, select

“RPT OFF” or “RND OFF.”

Listening to a disc

~

]

Turn on the power.

Ÿ

All tracks will be played repeatedly until you change

the source or eject the disc.

[Hold]

EN02-11_KD-R611_003A_3.indd 10EN02-11_KD-R611_003A_3.indd 10 11/24/09 4:38:49 PM11/24/09 4:38:49 PM

11ENGLISH

Listening to the USB device

This unit can play MP3/WMA files stored on a USB mass storage class device.

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player,

etc. to the unit.

• You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations,

32.

~

]

Turn on the power.

Ÿ

All tracks will be played repeatedly until you change the

source or detach the USB device.

Caution on volume setting:

USB devices produce very little noise compared

with other sources. Lower the volume before

playing a USB to avoid damaging the speakers

by sudden increase of the output level.

USB input jack

USB memory

Changing the display information

Disc title/Album name/performer (folder

name)*

=

Track title (file name)*

=

Current

track number with the elapsed playing time

=

Current track number with the clock

time

=

(back to the beginning)

* If the current disc is an audio CD, “NO NAME”

appears.

If an MP3/WMA file does not have Tag

information or <TAG DISPLAY> is set to

<TAG OFF> ( 24), folder name and file name

appear.

Using the remote controller

5

U

/

D

∞

: Selects folder of the

MP3/WMA

2

R

/

F

3

: Selects track

2

R

/

F

3

[Hold]

: Fast-forwards or

reverses the track

If you have turned off the power (without

detaching the USB device)...

Pressing

/ SOURCE

turns on the power and

playback starts from where it has been stopped

previously.

• If a different USB device is currently attached,

playback starts from the beginning.

EN02-11_KD-R611_003A_3.indd 11EN02-11_KD-R611_003A_3.indd 11 11/24/09 4:38:50 PM11/24/09 4:38:50 PM

12 ENGLISH

For Bluetooth operations, it is required to

connect the Bluetooth adapter, KS-BTA200 (not

supplied) to the expansion port on the rear of

this unit.

•

Refer to pages

i

and

ii

at the end of the

manual to check the countries where you

may use the Bluetooth

® function.

•

For details, refer also to the instructions

supplied with the Bluetooth adapter and the

Bluetooth device.

To use a Bluetooth device through the unit

(“BT-PHONE” and “BT-AUDIO”) for the first time,

you need to establish a Bluetooth wireless

connection between the unit and the device.

•

This unit may not be able to play the files

depending on the type of USB device.

•

Operation and power supply may not work as

intended for some USB devices.

•

You cannot connect a computer to the USB

input terminal of the unit.

• Make sure all important data has been backed

up to avoid losing the data.

• Do not leave a USB device in the car, expose

to direct sunlight, or high temperature to

avoid deformation or cause damages to the

device.

• Some USB devices may not work immediately

after attaching USB device or turn on the

power.

• For more details about USB operations,

32.

Stop playing and detaching the

USB device

Straightly pull it out from the unit.

“NO USB” appears. Press

/ SOURCE

to listen to

another playback source.

You can operate the USB device in the same

way you operate the files on a disc.

(

10, 11)

Cautions:

• Avoid using the USB device if it might hinder

your safety driving.

• Do not pull out and attach the USB device

repeatedly while “READING” is shown on the

display.

• Do not start the car engine if a USB device is

connected.

Using Bluetooth ® devices

• Once the connection is established, it is

registered on the unit even if you reset your

unit. Up to five devices can be registered in

total.

• Only one device can be connected at a time

for each source (“BT-PHONE” and “BT-AUDIO”).

Registration (Pairing) methods

Use either of the following items (“OPEN” or

“SEARCH” ) in the Bluetooth menu to register

and make the unit ready to establish a new

Bluetooth connection with a device.

“OPEN” : Connection is established by

operating the Bluetooth device.

“SEARCH” : Connection is established by

operating the unit.

EN12-21_KD-R611_003A_1.indd 12EN12-21_KD-R611_003A_1.indd 12 10/27/09 11:45:53 AM10/27/09 11:45:53 AM

13ENGLISH

Registering using “OPEN”

Preparation: Operate the device to turn on its

Bluetooth function.

1

]

“BT-PHONE” or “BT-AUDIO”

2

]

“NEW DEVICE”

]

“OPEN”

3

]

Enter a PIN (Personal Identification

Number) code in to the unit.

You can enter any number you like

(1-digit to 16-digit number).

[Initial: 0000]

• Some devices have their own PIN

code. Enter the specified PIN code in

to the unit.

4

Repeat step 3 until you have finished

entering the PIN code.

5

“OPEN..” flashes.

6

Use the Bluetooth device to search and

connect.

On the device to be connected, enter

the same PIN code you have just

entered for this unit. “CONNECTED”

appears.

Now connection is established and you

can use the device through the unit.

The device remains registered even after you

disconnect the device. Use “CONNECT“ (or

activate “AUTO CNNCT”) to connect the same

device from next time on. (

16)

Registering using

“SEARCH”/“SPECIAL”

1

]

“BT-PHONE” or “BT-AUDIO”

2

]

“NEW DEVICE”

3

]

“SEARCH” : To search for available

devices

The unit searches and displays the list

of the available devices. “UNFOUND”

appears if no available device is

detected.

– – – – – or – – – – –

]

“SPECIAL” : To connect a special

device

The unit displays the list of the preset

devices.

4

]

Select a device you want to connect.

5

For available devices...

]

Enter the specific PIN code of the

device to the unit.

• Refer to the instructions supplied with

the device to check the PIN code.

Use the Bluetooth device to connect.

Now connection is established and you

can use the device through the unit.

For special device...

Use “OPEN” or “SEARCH” to connect.

EN12-21_KD-R611_003A_3.indd 13EN12-21_KD-R611_003A_3.indd 13 11/24/09 4:47:25 PM11/24/09 4:47:25 PM

14 ENGLISH

Connecting/disconnecting/

deleting a registered device

1

]

“BT-PHONE” or “BT-AUDIO”

2

]

Select a device you want to

connect/disconnect/delete.

3

]

“CONNECT” or “DISCONNECT” : To

connect/disconnect the selected device

– – – – – or – – – – –

]

“DELETE”

]

“YES” : To delete the

selected device

You can set the unit to connect the Bluetooth

device automatically when the unit is turned

on. ( “AUTO CNNCT,”

16)

Using a Bluetooth

mobile phone

~

]

“BT-PHONE”

Ÿ

]

Bluetooth menu

! Make a call or setting using

the Bluetooth setting menu.

( 16)

When a call comes in....

The source is automatically changed to

“BT-PHONE.”

• The display will flash in blue. (<RING COLOR>,

25)

When “AUTO ANSWER” is activated....

The unit answers the incoming calls

automatically. ( 16)

• When “AUTO ANSWER” is deactivated, press

any button (except

/ SOURCE

/ /

0

) to

answer the incoming call.

• You can adjust the microphone volume level.

( 16)

To end the call

Hold any button (except

/ SOURCE

/ /

0

).

When a text message comes in....

If the mobile phone is compatible with text

message (notified through JVC Bluetooth

adapter) and “MSG INFO” (message info) is

set to “AUTOMATIC” ( 16), the unit rings to

inform you of the message arrival.

• “RCV MESSAGE” (receiving message) appears

and the display illuminate in blue. (<RING

COLOR>, 25)

Using the remote controller

5

U

/

D

∞

/

2

R

/

F

3

/

SOURCE

: Answers calls

5

U

/

D

∞

/

2

R

/

F

3

/

SOURCE

[Hold]

: Rejects calls

Making a call

1

]

“BT-PHONE”

2

3

]

Select “DIAL” menu.

EN12-21_KD-R611_003A_3.indd 14EN12-21_KD-R611_003A_3.indd 14 11/24/09 4:47:25 PM11/24/09 4:47:25 PM

15ENGLISH

4

]

Select a calling method.

PHONE BOOK*

j

MISSED*

j

NUMBER

j

VOICE DIAL

j

REDIAL*

j

RECEIVED*

j

(back to

the beginning)

* Displays only when your mobile phone

is equipped with these functions and is

compatible with this unit.

5

For REDIAL, RECEIVED, MISSED

]

Repeat step 4 to select a name (if it is

acquired) or a phone number.

For PHONE BOOK

]

Repeat step 4 to select a name or a

phone number.

For NUMBER

]

Enter a phone number.

]

Confirm.

For VOICE DIAL

]

Speak the name you want to call

when “SAY NAME” appears.

• If your mobile phone does not support

the voice recognition system, “ERROR”

appears.

• Using voice tags may be difficult in

a noisy environment or during an

emergency.

Using a Bluetooth audio

player

]

“BT-AUDIO”

If playback does not start, operate the

Bluetooth audio player to start playback.

Operate the Bluetooth audio player to

pause (if playback does not pause when you

change the source).

Reverse skips/forward

skips

Pauses/starts playback*

* Operation may be different

according to the connected

Bluetooth audio player.

Enter setting menu (Device

list)

For connecting/disconnecting/deleting a

registered device, 14.

Using the remote controller

2

R

/

F

3

: Reverse skips/forward

skips

EN12-21_KD-R611_003A_3.indd 15EN12-21_KD-R611_003A_3.indd 15 11/24/09 4:47:26 PM11/24/09 4:47:26 PM

16 ENGLISH

Setting menu [Initial: Underlined]

AUTO CNNCT (connect)

When the unit is turned on, the connection is

established automatically with...

OFF: No Bluetooth device.

LAST: The last connected Bluetooth device.

ORDER: The available registered Bluetooth

device found at first.

AUTO ANSWER

Only for the device being connected for

“BT-PHONE.”

ON: The unit answers the incoming calls

automatically.

OFF: The unit does not answer the calls

automatically. Answer the calls

manually.

REJECT: The unit rejects all incoming calls.

MSG INFO (message info)

Only for the device being connected for

“BT-PHONE.”

AUTOMATIC: The unit informs you of the

arrival of a message by ringing

and displaying “RCV MESSAGE”

(receiving message).

• The display illuminate in blue.

(<RING COLOR>,

25)

MANUAL: The unit does not inform you of

the arrival of a message.

MIC SETTING (microphone setting)

Only for the device being connected for

“BT-PHONE.” Adjust microphone volume

connected to the Bluetooth adapter,

[LEVEL 01/02/03].

VERSION

The Bluetooth software and hardware versions

are shown.

Changing the Bluetooth settings

1

]

“BT-PHONE” or “BT-AUDIO”

2

]

Bluetooth menu

3

]

“SETTINGS”

4

]

Select a setting item.

AUTO CNNCT

j

AUTO ANSWER *

1

j

MSG INFO *

2

j

MIC SETTING *

1

j

VERSION *

3

j

(back to the

beginning)

5

]

Change the setting accordingly. For

setting menu, right column.

*

1

Appears only when a Bluetooth phone is

connected.

*

2

Appears only when a Bluetooth phone is

connected and it is compatible with text

message (notified through JVC Bluetooth

adapter).

*

3

Bluetooth Audio: Shows only “Version.”

Bluetooth Information:

If you wish to receive more information

about Bluetooth, visit the following JVC web

site: <http://www.jvc.co.jp/english/car/>

(English website only)

EN12-21_KD-R611_003A_3.indd 16EN12-21_KD-R611_003A_3.indd 16 11/24/09 4:47:26 PM11/24/09 4:47:26 PM

17ENGLISH

Warning messages

ERROR CNNCT (Error Connection)

The device is registered but the connection

has failed. Use “CONNECT” to connect the

device again. ( 14)

ERROR

Try the operation again. If “ERROR” appears

again, check if the device supports the

function you have tried.

UNFOUND

No available Bluetooth device is detected

by “SEARCH.”

LOADING *

The unit is updating the phone book.

PLEASE WAIT

The unit is preparing to use the Bluetooth

function. If the message does not disappear,

turn off and turn on the unit, then connect

the device again (or reset the unit).

RESET 8

Check the connection between the adapter

and this unit.

* Displays only when your mobile phone

is equipped with these functions and is

compatible with this unit.

Listening to the iPod/iPhone

You can connect the iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the

USB input jack on the control panel.

USB 2.0 cable (accessory of

the iPod/iPhone)

Apple iPod/iPhone

USB input jack

• Disconnecting the iPod/iPhone will stop

playback. Press

/ SOURCE

to listen to another

playback source.

• For details, refer also to the instructions

supplied with your iPod/iPhone.

Caution:

• Avoid using the iPod/iPhone if it might hinder

your safety while driving.

• Make sure all important data has been backed

up to avoid losing the data.

EN12-21_KD-R611_003A_3.indd 17EN12-21_KD-R611_003A_3.indd 17 12/4/09 6:00:38 PM12/4/09 6:00:38 PM

18 ENGLISH

Selecting a track from the menu

1

2

]

Select the desired menu.

PLAYLISTS

j

ARTISTS

j

ALBUMS

j

SONGS

j

PODCASTS

j

GENRES

j

COMPOSERS

j

AUDIOBOOKS

j

(back to the

beginning)

3

]

Select the desired track.

Repeat this procedure until the desired

track is selected.

• If the selected menu contains many tracks,

you can fast search (±10, ±100, ±1000)

through the menu by turning the control dial

quickly.

• To return to the previous menu, press

T/P BACK

.

Selecting the playback modes

1

2

]

“REPEAT”

j

“RANDOM”

[Hold]

There are two control terminals:

• <HEAD MODE> Control by this unit.

• <IPOD MODE> Control by the connected

iPod/iPhone.

Preparation: Select the controlling terminal,

<HEAD MODE> or <IPOD MODE> for iPod

playback:

• Press and hold

T/P BACK

button.

• Make the selection from <IPOD SWITCH>

setting,

27.

The operations explained below are under

<HEAD MODE>.

~

]

“USB-IPOD”

Playback starts automatically.

Ÿ

]

Select a song.

Pauses or resumes

playback

Selects track

Fast-forwards or

reverses the track

[Hold]

EN12-21_KD-R611_003A_3.indd 18EN12-21_KD-R611_003A_3.indd 18 11/24/09 4:47:52 PM11/24/09 4:47:52 PM

19ENGLISH

3

REPEAT

ONE RPT : Functions the same as

“Repeat One” of the iPod

ALL RPT : Functions the same as

“Repeat All” of the iPod

RANDOM

ALBUM RND : Functions the same as

“Shuffle Albums” of the

iPod

SONG RND : Functions the same as

“Shuffle Songs” of the

iPod

• To cancel repeat play or random play, select

“RPT OFF” or “RND OFF.”

• “ALBUM RND” is not available for some iPod.

• To return to the previous menu, press

T/P BACK

.

Changing the display information

Album name/performer

=

Track title

=

Current track number with the elapsed

playing time

=

Current track number with

the clock time

=

(back to the beginning)

Using the remote controller

2

R

/

F

3

: Selects track

2

R

/

F

3

[Hold]

: Fast-forwards or

reverses the track

Notice:

When operating an iPod, some operations

may not be performed correctly or as

intended. In this case, visit the following JVC

web site: <http://www.jvc.co.jp/english/car/>

(English website only)

Listening to the DAB tuner

Before operating, connect the JVC DAB tuner, KT-DB1000 (not supplied) to the expansion port on

the rear of the unit.

Preparation: Make sure <EXT ON> is selected in the <SRC SELECT>

=

<EXT IN> setting. ( 27)

• For details, refer also to the instructions supplied with the JVC DAB tuner.

~

]

“DAB”

Ÿ

]

Search for an ensemble.

When an ensemble is tuned in,

searching stops. To stop searching,

press the same button again.

!

]

Select a service (primary or

secondary) to listen to.

EN12-21_KD-R611_003A_3.indd 19EN12-21_KD-R611_003A_3.indd 19 11/24/09 4:47:53 PM11/24/09 4:47:53 PM

20 ENGLISH

Manual search for an ensemble

“M” flashes, then press

the button repeatedly.

Storing DAB services in memory

You can preset six DAB services (primary).

Ex.: Storing an ensemble (primary service) into

the preset number “04.”

1

Select a service (steps

~

to

!

, 19).

2

“PRESET MODE” flashes.

3

]

Selects preset number “04.”

“P04” flashes and “MEMORY” appears.

Selecting a preset station

or

1

2

Changing the display information

Service name

=

Ensemble

name

=

Channel number

=

Frequency

=

Clock

=

(back to

the beginning)

Using the remote controller

5

U

/

D

∞

: Changes the DAB

preset stations

2

R

/

F

3

: Searches for DAB

stations

Tracing the same programme—

Alternative Frequency Reception (DAB AF)

You can keep listening to the same programme

by activating the Alternative Frequency

Reception.

• While receiving a DAB service:

When driving in an area where a service

cannot be received, this unit automatically

tunes in to another ensemble or FM Radio

Data System station, broadcasting the same

programme.

• While receiving an FM Radio Data System

station:

When driving in an area where a DAB service

is broadcasting the same programme as the

FM Radio Data System station is broadcasting,

this unit

automatically tunes in to the DAB

service.

When shipped from the factory, Alternative

Frequency Reception is activated.

To deactivate the Alternative Frequency

Reception,

25.

[Hold]

EN12-21_KD-R611_003A_3.indd 20EN12-21_KD-R611_003A_3.indd 20 12/1/09 9:03:30 AM12/1/09 9:03:30 AM

La page charge ...

JVC KD-R611E Le manuel du propriétaire

Ce manuel convient également à

JVC KD-R611E Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents