Winmate W10IB3S-PCH2-PoE S-Series Manuel utilisateur

10.1"S-Series HMI

W10IB3S-PCH2AC-PoE (with LED light bar)

W10IB3S-PCH2-PoE (without LED light bar)

Slim-line

User Manual

Version 1.1

Manual Part Number: 9152111I100M

10.1" S-Series HMI User Manual

ii

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted

in any form or by any means, electronic or mechanical, for any purpose, without

the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to

improve design and/or performance. We assume no responsibility or liability for

the use of the described product(s) conveys no license or title under any patent,

copyright, or masks work rights to these products, and make no representations

or warranties that these products are free from patent, copyright, or mask work

right infringement, unless otherwise specified. Applications that are described in

this manual are for illustration purposes only. We make no representation or

guarantee that such application will be suitable for the specified use without

further testing or modification.

10.1" S-Series HMI User Manual

iii

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the

customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned

product must be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the

serial numbers the third and fourth two digits give the year of manufacture, and

the fifth digit means the month (e. g., with A for October, B for November and C

for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit

the website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

10.1" S-Series HMI User Manual

iv

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful

information or to alert you to the potential for hardware damage or personal injury.

These are Notes, Important, Cautions, and Warnings. The following is an example of

each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to

know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how

to avoid the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur

des emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates

the potential risk of serious electrical shock due to improper

grounding.

Le symbole de Mise à Terre indique le risqué potential de choc

électrique grave à la terre incorrecte.

10.1" S-Series HMI User Manual

v

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait

ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

10.1" S-Series HMI User Manual

vi

Safety Precautions

For your safety carefully read all the safety instructions before using the

device. Keep this user manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning.

Do not use liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it

or letting it fall could cause damage.

 The openings on the enclosure are for air convection and to protect the

equipment from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the

voltage of the power source is correct.

 Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

 If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical

shock.

 Never open the equipment. For safety reasons, only qualified service

personnel should open the equipment.

 All cautions and warnings on the equipment should be noted.

10.1" S-Series HMI User Manual

vii

*Let service personnel to check the equipment in case any of the

following problems appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work

according to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the

storage temperature is below -20°C (-4°F) or above 60°C (140°F). It may

damage the equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk

of injury.

Utiliser l’appareil de fixation recommandé pour éliminer

le risque de blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the

product. When in doubt, please contact the

manufacturer.

Utiliser seulement les cordons d’alimentation fournis

avec le produit. Si vous doutez de leur provenance,

contactez le manufacturier.

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to

the device.

Toujours vérifier votre mise à la terre afin que

l’équipement ne se décharge pas sur vous.

10.1" S-Series HMI User Manual

viii

 Cover workstations with approved anti-static material. Use a wrist

strap connected to a work surface and properly grounded tools and

equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by

the case or the edge of the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing

connectors or test equipment.

 Keep the work area free of non-conductive materials, such as ordinary

plastic assembly aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum

cleaners that are conductive.

 Always put drivers and PCB’s component side on anti-static foam.

10.1" S-Series HMI User Manual

ix

Important Information

Countries/

Area

Symbol

This equipment complies with essential

requirements of:

European

Union

Electromagnetic Compatibility

Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous

substances (RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class

"B" digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at him own expense.

Refer to Certificates for the original document.

10.1" S-Series HMI User Manual

x

EC Declaration of Conformity

[English]

The object of the declaration described above [A] is in conformity with the

requirement of the following EU legislations [B] and harmonized standards [C].

Product also complies with the Council directions [D].

[German]

Das oben beschriebene Objekt [A] entspricht den Anforderungen der nachfolgend

aufgeführten EU-Vorgben [B] und den harmonisierten Normen [C]. Das Produkt

entspricht außerdem den EU-Direktiven [D].

[French]

L'objet de la déclaration décrite ci-dessus [A] est conformité aux conditions stipulées

dans les législations de l’Union européenne énoncées ci-après [B] et aux normes

harmonisées [C]. Ce produit est également conforme aux directives du Conseil

européen [D].

[Other languages]

Other languages are available upon request.

Refer to Certificates for the original document.

10.1" S-Series HMI User Manual

xi

Revision History

Version

Date

Note

Author

1.1

15-Jan-2016

Update BIOS Setup,

mounting solutions,

connector pinouts

Kent Ou-Yong

10.1" S-Series HMI User Manual

xii

Contents

Preface .................................................................................................................... ii

1 Introduction .......................................................................................................... 2

1.1 Product Features ....................................................................................... 3

1.2 Hardware Specifications .............................................................................. 3

1.3 Software Support ......................................................................................... 4

1.4 Packing List .................................................................................................. 5

1.4.1 Accessories ......................................................................................... 5

1.4.2 Options ............................................................................................... 6

1.5 Appearance .................................................................................................. 8

1.5.1 W10IB3S-PCH2AC-PoE ........................................................................ 8

1.5.2 W10IB3S-PCH2-PoE ............................................................................ 9

1.6 Dimensions ................................................................................................ 10

1.6.1 W10IB3S-PCH2AC-PoE ...................................................................... 10

1.6.2 W10IB3S-PCH2-PoE .......................................................................... 11

2 Getting Started ..................................................................................................... 2

2.1 Powering On ................................................................................................ 2

2.1.1 AC Adapter Components .................................................................... 2

2.1.2 Power Considerations ......................................................................... 3

2.1.3 Connecting the Source of Power ......................................................... 4

2.2 Connector Pinouts ....................................................................................... 4

2.2.1 DC In Terminal Block Connector.......................................................... 4

2.2.2 POE/LAN (RJ45) Connector ................................................................. 5

2.2.3 COM1 Serial Port (RS-232) Connector ................................................. 5

2.2.4 USB 2.0/ USB 3.0 Connector ............................................................... 5

2.2.5 HDMI Connector ................................................................................. 6

2.2.6 Digital I/O Connector .......................................................................... 6

10.1" S-Series HMI User Manual

xiii

2.3 Turning On ................................................................................................... 6

2.4 Configuring Serial Port COM1 ...................................................................... 6

2.5 Turning Off ................................................................................................... 8

3 Operating the HMI Device ................................................................................... 10

3.1 System Settings .......................................................................................... 10

3.1.1 Hot Tab Menu ................................................................................... 10

3.1.2 Utilities ............................................................................................. 10

3.1.3 Brightness ......................................................................................... 10

3.1.4 Volume ............................................................................................. 11

3.1.5 LED Light Bar (Easy-Testing) .............................................................. 11

3.1.6 Performance ..................................................................................... 12

3.1.7 Touch Lock ........................................................................................ 12

3.1.8 HF RFID ............................................................................................. 12

3.2 Operating System ....................................................................................... 16

4 Driver Installation ............................................................................................... 18

4.1 Installing Chipset Driver ............................................................................. 18

4.2 Installing Graphics Driver ........................................................................... 21

4.3 Installing Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8) ..... 22

4.4 Installing Intel Trusted Engine Interface (Intel TXE) Driver ......................... 23

4.5 Installing Intel Network Connections ......................................................... 24

4.6 Installing Audio Driver ................................................................................ 25

4.7 Installing USB 3.0 Driver (Windows 7) ........................................................ 26

5 BIOS Setup .......................................................................................................... 29

5.1 When and How to Use BIOS Setup ............................................................. 29

5.2 BIOS Functions ........................................................................................... 30

5.2.1 Main Menu ....................................................................................... 31

5.2.2 Advanced Menu ................................................................................ 32

10.1" S-Series HMI User Manual

xiv

5.2.3 Chipset Menu ................................................................................... 52

5.2.4 Security Menu ................................................................................... 53

5.2.5 Boot Configuration ........................................................................... 54

5.2.6 Save & Exit ........................................................................................ 56

5.3 Using Recovery Wizard to Restore Computer ............................................ 58

6 Mounting Solutions ............................................................................................ 61

6.1 Cable Mounting Considerations ................................................................. 61

5.2 Safety Precautions ..................................................................................... 62

5.3 Mounting Guide ......................................................................................... 62

5.3.1 VESA Mount ...................................................................................... 62

5.3.2 Flush Mount / Panel Mount .............................................................. 63

5.4 Optional Mounting Solutions ..................................................................... 64

5.4.1 Front Side Wall Mount ...................................................................... 64

5.4.2 Desk Stand ........................................................................................ 65

7 Technical Support ............................................................................................... 67

7.1 Software Developer Support ...................................................................... 67

7.1.1 Digital I/O SDK .................................................................................. 67

7.1.2 Watchdog SDK .................................................................................. 67

7.1.3 LED Light Bar Porting Guide .............................................................. 67

7.1.4 RFID Porting Guide ............................................................................ 67

7.2 Problem Report Form ................................................................................ 68

8 Certificates .......................................................................................................... 70

8.1 FCC Declaration of Conformity ................................................................... 70

8.1.1 W10IB3S-PCH2AC-PoE ...................................................................... 70

8.1.2 W10IB3S-PCH2AC-POE ...................................................................... 71

8.2 EC Declaration of Conformity ..................................................................... 72

8.2.1 W10IB3S-PCH2AC-PoE ...................................................................... 72

10.1" S-Series HMI User Manual

xv

8.2.2 W10IB3S-PCH2AC-POE ...................................................................... 73

10.1" S-Series HMI User Manual

1

Introduction

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with the HMI device in the

packing list. Mechanical dimensions and

drawings included in this chapter.

10.1" S-Series HMI User Manual

2

1 Introduction

Interactive and smart automation systems of intelligent buildings are in a

fast growing phase. Winmate multi-touch S-Series HMI is suitable for home

automation and room management systems. Flat surface is easy-to-clean

and delivers aesthetically pleasing look for any interior. The device

provides real time update for booking status and available schedule, or

performs as a synchronous display in meetings. Optional HF RFID 13.56

MHz is especially useful in access control applications.

S-Series HMI run on 1.83GHz Intel® Celeron® N2930 processor and support

Windows 10 IoT, Windows Embedded 8.1 Industry Pro, Windows

Embedded 8 Standard, Windows 7 Pro for Embedded Systems, and

Windows Embedded Standard 7 – WS7P. The HMI features P-Cap touch-

screen with 1280 x 800 pixel resolution. For easy, quick and cost effective

network installations both models support PoE. These models sealed with

front IP 65 dust and water proof, and IP22 on the back side.

The W10IB3S-PCH2AC-PoE model supports an exceptional feature - LED

light bar. With the help of red, green, blue and orange LED indicators you

can see the status of the machine or processes afar. It significantly reduces

power consumption by keeping the display turned off.

10.1" S-Series HMI User Manual

3

1.1 Product Features

Model Name

W10IB3S-PCH2AC-PoE

W10IB3S-PCH2-PoE

Product Line

10.1” S-Series HMI (Slim-line)

Resolution

1280 x 800

Operating System

Windows 10 IoT

Windows Embedded 8.1 Industry Pro

Windows Embedded 8 Standard

Windows 7 Pro for Embedded Systems

Windows Embedded Standard 7 – WS7P

CPU

Ultra-low power consumption with Intel® Celeron® N2930

processor

Cooling System

Fanless cooling system

IP Rating

Front: IP65 water and dust proof

Rear: IP22

LED Light Bar

Default

N/A

HF RFID

Optional

N/A

PoE

Default (IEEE 802.3at)

1.2 Hardware Specifications

System:

Processor

Intel ® Celeron ® Bay Trail-M N2930 1.83GHz

System Chipset

Intel® ATOM SoC Integrated

System Memory

2GB DDR3L 1066/1333 SO-DIMM (optional 4GB)

Storage

64GB mSATA SSD

LAN

Dual Intel® WG82574L GbE LAN

Display:

Size/Type

10.1" TFT (widescreen)

Resolution

1280x800

Brightness

300 cd/m (typ.)

Contrast Ratio

800:1 (typ.)

Viewing Angle

-89~89 (H);-89~89(V)

Max Colors

262K (6bit)

Touch

Projective-capacitive touch (up to 4 points)

Input / Output:

Serial Ports

1 x RS-232/422/485

10.1" S-Series HMI User Manual

4

USB Ports

1 x USB 3.0, 1 x USB 2.0

Ethernet

2 x RJ 45-10/100/1000 Mbps

HDMI

1 x HDMI

Speaker

1 x 1 watt speaker

*Digital I/O

1 x 1 digital I/O

Mechanical Specification:

Cooling System

Fanless design

Mounting

VESA Mount (75 x 75mm)

Dimensions

(W x H x D)

263.28 x 171 x 35.7 (mm)

Environment:

Operating Temperature

0 °C to +50 °C

Operating Humidity

10% to 90% (non-condensing)

IP Rating

Front: IP65 water and dust proof

Rear: IP22

Power Considerations:

Power Input

12V DC in terminal block (phoenix type)

Support IEEE 802.3at PoE

*optional

1.3 Software Support

Drivers:

Chipset Driver

Graphics Driver

Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8)

Intel Trusted Engine Interface (Intel TXE) Driver

Audio Driver

USB 3.0 Driver (Windows 7)

SDK:

LED Light Bar Porting Guide

RFID Porting Guide

10.1" S-Series HMI User Manual

5

1.4 Packing List

Carefully remove the box and unpack your HMI device. Please check if all

the items listed below are inside your package. If any of these items are

missing or damaged contact us immediately.

1.4.1 Accessories

Standard factory shipment list:

10.1” HMI

Device

Power Cord

AC Adapter

Terminal Block

3 pin

External USB

cable

Driver CD &

User Manual

VESA Mounting

Screws

La page est en cours de chargement...

Winmate W10IB3S-PCH2-PoE S-Series Manuel utilisateur

Ce manuel convient également à

Winmate W10IB3S-PCH2-PoE S-Series Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents