Winmate W07FA3S-PCM1AC-PoE Manuel utilisateur

7"S-Series HMI

W07FA3S-PCM1AC-PoE (with LED light bar)

W07FA3S-PCM1-PoE (without LED light bar)

Slim-line

User Manual

Version 1.1

Document Part Number: 9171111I102D

ii

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s)

conveys no license or title under any patent, copyright, or masks work rights to these

products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer discovers

a defect, we will, at his/her option, repair or replace the defective product at no charge to the

customer, provide it is returned during the warranty period of one year, with transportation

charges prepaid. The returned product must be properly packaged in its original packaging to

obtain warranty service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit

means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

iv

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards and

how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à

la terre incorrecte.

v

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is

on. Sensitive electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As

a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep this

user manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

 The openings on the enclosure are for air convection and to protect the equipment

from overheating.

vi

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

 Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

 If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work according

to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque

de blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product. When

in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

vii

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by the case or

the edge of the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors or test

equipment.

 Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

 Always put drivers and PCB’s component side on anti-static foam.

viii

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements of:

USA

FCC Part 15 Subpart B Regulations Class B

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

Refer to Certificates for the original document.

ix

EC Declaration of Conformity

[English]

The object of the declaration described above [A] is in conformity with the requirement of the

following EU legislations [B] and harmonized standards [C].

Product also complies with the Council directions [D].

[German]

Das oben beschriebene Objekt [A] entspricht den Anforderungen der nachfolgend aufgeführten

EU-Vorgben [B] und den harmonisierten Normen [C]. Das Produkt entspricht außerdem den EU-

Direktiven [D].

[French]

L'objet de la déclaration décrite ci-dessus [A] est conformité aux conditions stipulées dans les

législations de l’Union européenne énoncées ci-après [B] et aux normes harmonisées [C]. Ce produit

est également conforme aux directives du Conseil européen [D].

[Other languages]

Other languages are available upon request.

Refer to Certificates for the original document.

Revision History

Version

Date

Note

Author

1.0

17-Mar-2016

Initial release

Bill Yeh

1.1

25-Jul-2016

Add Winmate Home Manager AP

Bill Yeh

x

Contents

Preface ........................................................................................................................................ ii

1 Introduction .............................................................................................................................. 1

1.1 Product Features .................................................................................................................. 1

1.2 Hardware Specifications ...................................................................................................... 2

1.3 Software Support ................................................................................................................. 3

1.4 Packing List ........................................................................................................................... 3

1.4.1 Accessories ................................................................................................................ 3

1.4.2 Options ...................................................................................................................... 4

1.5 Appearance .......................................................................................................................... 5

1.6 Dimensions ........................................................................................................................... 6

2 Getting Started.......................................................................................................................... 8

2.1 Powering On ......................................................................................................................... 8

2.1.1 AC Adapter Components ........................................................................................... 8

2.1.2 Power Considerations ............................................................................................... 9

2.1.3 Connecting the Power ............................................................................................... 9

2.2 Connector Pinouts ............................................................................................................. 10

2.2.1 DC-in (9~24V) Connector ......................................................................................... 10

2.2.2 POE/LAN (RJ45) Connector...................................................................................... 10

2.2.3 Serial Port Connector .............................................................................................. 10

2.2.4 USB OTG Connector................................................................................................. 11

2.2.5 Two USB 2.0 Connectors ......................................................................................... 11

2.2.6 Micro SD Card Slot ................................................................................................... 11

2.3 Changing Serial Port Settings ............................................................................................. 11

2.4 Turning On/ Off .................................................................................................................. 13

3 Operating the Device ............................................................................................................... 15

3.1 Operating System ............................................................................................................... 15

3.2 Multi-Touch ........................................................................................................................ 15

3.3 System Settings .................................................................................................................. 16

3.3.1 Set up the Device ..................................................................................................... 16

xi

3.3.2 Home Screen ........................................................................................................... 16

3.3.3 Quick Settings .......................................................................................................... 17

3.3.4 Brightness Adjustment ............................................................................................ 17

3.4 Ethernet AP ........................................................................................................................ 19

3.4.1 Configuring Ethernet ............................................................................................... 20

3.4.2 Checking Ethernet ................................................................................................... 20

3.5 Testing LED Light Bar .......................................................................................................... 21

3.6 Winmate® Home Manager (WHM) ............................................................................... 21

3.6.1 How to Lock Applications ........................................................................................ 22

3.6.2 How to Reset WHM ................................................................................................. 24

3.7 Using Front Camera ........................................................................................................... 26

3.7.1 The Camera Menu ................................................................................................... 26

3.7.2 Shooting Photos .................................................................................................... 27

3.7.3 Shooting Videos ....................................................................................................... 28

4 Software Update ..................................................................................................................... 30

4.1 Android Debug Bridge (ADB) Driver Installation ............................................................... 30

4.1.1 Disabling Driver Signature on Windows 8 ............................................................... 31

4.1.2 ADB Driver Installation ............................................................................................ 36

4.2 Installing Android Debug Bridge (ADB) .............................................................................. 40

4.3 Image Tool Download ........................................................................................................ 41

4.4 OTA Update Guide ............................................................................................................. 42

4.5 OS Image Update Guide ..................................................................................................... 45

5 Mounting Solutions ................................................................................................................. 52

5.1 Cable Mounting Considerations ........................................................................................ 52

5.2 Safety Precautions ............................................................................................................. 52

5.3 Mounting Guide ................................................................................................................. 53

5.3.1 VESA Mount ............................................................................................................. 53

5.3.2 Flush Mount / Panel Mount .................................................................................... 54

5.4 Optional Mounting Solutions ............................................................................................. 55

5.4.1 Desk Stand ............................................................................................................... 55

6 Technical Support .................................................................................................................... 57

xii

6.1 Introduction ....................................................................................................................... 57

6.1.1 Winmate Download Center ..................................................................................... 57

6.1.2 Winmate File Share ................................................................................................. 57

6.1.3 Android Debug Bridge (ADB) ................................................................................... 58

6.2 Problem Report Form ........................................................................................................ 59

7 Certificates .............................................................................................................................. 61

7.1 FCC Declaration of Conformity .......................................................................................... 61

7.1.1 W07FA3S-PCM1AC-PoE ........................................................................................... 61

7.1.2 W07FA3S-PCM1-PoE ............................................................................................... 62

7.2 EC Declaration of Conformity ............................................................................................ 63

7.2.1 W07FA3S-PCM1-PoE ............................................................................................... 63

7.2.2 W10FA3S-PCH2-PoE ................................................................................................ 64

7” S-Series HMI

1

Introduction

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with the HMI device in the

packing list. Mechanical dimensions and

drawings included in this chapter.

User Manual Chapter 1 Introduction

7” S-Series HMI

1

1 Introduction

Interactive and smart automation systems of intelligent buildings are in a fast growing

phase. Winmate multi-touch S-Series HMI is suitable for home automation and room

management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing

look for any interior. By connecting to centralized database, it can provide real time

update for booking status and available schedule, or perform as a synchronous display

in meetings. Optional 2-megapixel front camera is especially useful in access control

applications.

S-Series HMI run on Freescale Cortex A9 i.MX6 Dual Core 1GHz (can be upgraded to

Quad Core) processor and support Android 4.4 and Linux Kernel 3.0.35 operating

systems. The HMI device features P-Cap touch-screen. These models sealed with front

IP 65 dust and water proof, and full IP22.

The W07FA3S-PCM1AC-PoE model support an exceptional feature - LED light bar. With

the help of red, green, blue and orange LED indicators you can see the status of the

machine or processes afar. It significantly reduces power consumption by keeping the

display turned off.

1.1 Product Features

Winmate® 7” S-Series HMI features:

 1024 x 600 screen resolution with P-CAP touchscreen

 Fanless cooling system and Ultra-low power consumption

 Front IP65 water and dust proof, rear IP22

 Dual Gigabit Ethernet

 LED Light Bar

 Optional 2MP front camera

 Power over Ethernet (PoE)

 Stylish design for room booking, access control and room information

applications

User Manual Chapter 1 Introduction

7” S-Series HMI

2

1.2 Hardware Specifications

Model Name

W07FA3S-PCM1AC-PoE / W07FA3S-PCM1-PoE

Display

Specifications

Size

7” TFT (Widescreen)

Resolution

1024 x 600

Brightness (



)

500 (typ.)

Contrast Ratio

700 : 1 (typ.)

Viewing Angle

-75~75 (H);-70~75(V)

Max Colors

262K (6bit)

Touch

PCAP Multi-Touch support 5 points

System Specification

CPU

Freescale® Cortex® A9 i.MX6 Dual Core

1GHz (optional Quad Core)

System Chipset

Freescale i.MX6

Memory

1GB LPDDR3 (optional 2GB LPDDR3)

Storage

16 GB eMMC (default), mSATA/ Micro

SD card

Ethernet

Dual Broadcom BCM57780 GbE

Controller

OS

Android 4.4 (default)

Linux Kernel 3.0.35, QT 5.4 Browser

(optional)

I/O Connectors

Serial Port

2 x RS-232 (optional 422/485)

USB Port

2 x USB 2.0 host, 1 x USB OTG

Ethernet Port

1 x RJ 45-10/100/1000 Mbps

LAN support PoE function

SD Card Slot

1 x Micro SD Card Slot

Peripheral

Camera

2 MP front-facing camera

Audio Output

1Watt Speaker

LED Light Bar

Indicator

Built-in RGB LED light bar (only for

W07FA3S-PCM1AC-PoE)

Power Management

Power Input

12V DC-in Jack

Power Consumption

12W

Power over Ethernet

Support IEEE 802.3at (25W)

Mechanical

Specifications

Dimensions

(W x L x H)

189.4 x 145.4 x 37.7 mm

Mounting

VESA Mount (75 x 75 mm)

Cooling System

Fanless design

Environmental

Considerations

Operating Temp.

0°C ~ +55°C

Humidity

10% ~ 90% (non-condensing, RH)

IP Rating

IP65 (Front Side)

User Manual Chapter 1 Introduction

7” S-Series HMI

3

1.3 Software Support

Programming Guide:

Android

Linux

1.4 Packing List

Carefully remove the box and unpack your HMI device. Please check if all the items

listed below are inside your package. If any of these items are missing or damaged

contact us immediately.

1.4.1 Accessories

Standard factory shipment list:

7” HMI Device

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

AC Adapter

(12V/ 36W)

Power Cord

VESA Plate

75 x 75 mm

VESA Mounting Screws

User Manual Chapter 1 Introduction

7” S-Series HMI

4

1.4.2 Options

Package may include optional accessories based on your order.

VESA Desk Stand

Model Name: PCVS-V1

Part Number: 99KK00A0000E

VESA Desk Stand Dimensions

User Manual Chapter 1 Introduction

7” S-Series HMI

5

1.5 Appearance

*RGB LED light bar only available for the model number W07FA3S-PCM1AC-PoE

①

SD Card Slot

⑤

2 x USB 2.0

⑨

2MP Camera (optional)

②

GIGA LAN/ PoE

⑥

RS-232/422/485

⑩

*RGB LED Light Bar

③

USB OTG

⑦

9~24V DC-in

④

RS-232/422/485

⑧

1 Watt Speaker

User Manual Chapter 1 Introduction

7” S-Series HMI

6

1.6 Dimensions

*Note: Measurements shown in mm.

**Note: this is a simplified drawing and some components are not marked in detail.

7” S-Series HMI

7

Getting Started

This chapter tells you important information

on power supply, adapter and precautions

tips. Pay attention to power considerations.

La page est en cours de chargement...

Winmate W07FA3S-PCM1AC-PoE Manuel utilisateur

Ce manuel convient également à

Winmate W07FA3S-PCM1AC-PoE Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents