Amana AQF1201TRW03 Le manuel du propriétaire

Marque: Amana

Modèle: AQF1201TRW03

Taper: Le manuel du propriétaire

UPRIGHTFREEZER

For questions about features, operation/performance,

parts or service, call: 1-800-253-1301.

In Canada, call for assistance 1-800-807-6777,

or visit our website at...

www.whirlpool.com or www.whirlpool.com/canada

CONGEIATEUR

VERTICAL

Au Canada, pour assistance, composez le 1-800-807-6777.

ou visitez notre site web www.whirlpool.com/eanada

Table of Contents/Table des matieres .................. 2

1-82034-004 Rev. 02

TABLEOFCONTENTS

FREEZER SAFETY ....................................................................................... 3

Proper Disposal of Your Old Freezer or Refrigerator ............................... 3

INSTALLATION INSTRUCTIONS ............................................................... 4

Unpacking ................................................................................................. 4

Location Requirements ............................................................................. 4

Electrical Requirements ............................................................................ 5

Freezer Door ............................................................................................. 5

Adjust the Door ......................................................................................... 7

FREEZER USE ............................................................................................. 8

Ensuring Proper Air Circulation ................................................................ 8

Using the Control ...................................................................................... 8

Key Eject Lock .......................................................................................... 8

FREEZER FEATURES ................................................................................. 9

Refrigerated Shelves ................................................................................. 9

Door Bin .................................................................................................... 9

Storage Basket ......................................................................................... 9

Storage Gate ............................................................................................. 9

FREEZER CARE .......................................................................................... 9

Cleaning Your Frost-Free Freezer ............................................................ 9

Base Grille ............................................................................................... 10

Defrosting and Cleaning Your Manual Defrost Freezer ......................... 10

Changing the Light Bulb ......................................................................... 11

Power Interruptions ................................................................................ 11

Moving Care ........................................................................................... 11

TROUBLESHOOTING ............................................................................... 11

ASSISTANCE OR SERVICE ...................................................................... 13

In the U.S.A ............................................................................................. 13

In Canada ................................................................................................ 13

Accessories ............................................................................................. 13

WARRANTY ............................................................................................... 14

TABLEDESMATIERES

SI_CURITI_ DU CONGI_LATEUR ............................................................... 15

Mise au rebut appropriee de votre

vieux cong61ateur ou refrigerateur .......................................................... 15

INSTRUCTIONS D'INSTALLATION ......................................................... 16

Deballage ................................................................................................ 16

Emplacement d'installation .................................................................... 16

Specifications 61ectriques ....................................................................... 17

Portes du cong_lateur ............................................................................ 17

Ajustement de porte ............................................................................... 20

UTILISATION BU CONGleLATEUR .......................................................... 20

Pour s'assurer d'une circulation d'air appropriee .................................. 20

Utilisation de la commande .................................................................... 20

Serrure & cl6 separee .............................................................................. 21

CARACTleRISTIQUES DU CONGleLATEUR ............................................ 21

Clayettes de refrigeration ........................................................................ 21

Balconnet de porte ................................................................................. 21

Panier d 'entreposage ............................................................................. 21

Barriere d'entreposage ........................................................................... 21

ENTRETIEN DU CONGleLATEUR ............................................................ 22

Nettoyage du cong61ateur sans givre .................................................... 22

Grille de la base ...................................................................................... 22

Degivrage et nettoyage du cong61ateur & degivrage manuel ................ 22

Remplacement de I'ampoule d'eclairage ............................................... 23

Pannes de courant electrique ................................................................. 24

Demenagement ...................................................................................... 24

DlePANNAGE ............................................................................................. 24

ASSISTANCE OU SERVICE ...................................................................... 26

Accessoires ............................................................................................. 26

GARANTIE .................................................................................................. 27

FREEZERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:To reduce the risk of fire, electric shock, or injury when using your freezer, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

• Use nonflammable cleaner.

[] Keep flammable materials and vapors, such as gasoline,

away from freezer.

[] Use two or more people to move and install freezer.

[] Keep key away from children.

• Remove doors or lid from your old freezer or refrigerator.

[] Disconnect power before installing ice maker (on ice maker

kit ready models only).

SAVE THESE INSTRUCTIONS

Proper Disposal of

Your Old Freezer or Refrigerator

Suffocation Hazard

Remove doors or lid from your old freezer or

refrigerator.

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned freezers or refrigerators are still

dangerous.., even if they will sit for "just a few days." If you are

getting rid of your old refrigerator or freezer, please follow these

instructions to help prevent accidents.

Before You Throw Away Your Old Freezer or Refrigerator:

• Takeoff the doors or lid.

• Leave the shelves in place so that children may not easily

climb inside.

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install freezer.

Failure to do so can result in back or other injury.

Remove Packaging Materials

• Remove tape and glue residue from surfaces before turning

on the freezer. Rub a small amount of liquid dish soap over the

adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your freezer. For more

information, see "Freezer Safety."

When Moving Your Freezer:

Your freezer is heavy. When moving the freezer for

cleaning or service, be sure to cover the floor with cardboard

or hardboard to avoid floor damage. Always pull the freezer

straight out when moving it. Do not wiggle or "walk" the

freezer when trying to move it, as floor damage could occur.

Clean Before Using

After you remove all of the packaging materials, clean the inside of

your freezer before using it. See the cleaning instructions in

"Freezer Care."

important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from freezer.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: Do not install the freezer near an oven, radiator, or

other heat source, nor in a location where the temperature will fall

below 40°F (5°C).

Check the strength of the floor before installing your freezer. It

should hold the weight of a freezer fully loaded with food.

Allow at least 3" (7.5 cm) of air space at the top and on both sides

of the freezer and 1" (2.5 cm) between the back of the freezer and

the wall. If the freezer is to be against a wall, leave extra space on

the hinge side so the door can open wider.

NOTE: This freezer may be installed side by side with another

refrigerator or freezer. Allow for a 3" (7.5 cm) clearance at the top

and sides and a 1/4"(0.64 cm) clearance between the appliances.

3" (7.5 cm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your freezer into its final location, it is important

to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your freezer be provided. Use an outlet that

cannot be turned off by aswitch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the Temperature Control to the OFF

position as shown and then disconnect the freezer from the

electrical source.

TOOLS NEEDED: %" hex-head socket wrench, 1/4"hex-head

socket wrench, 1/2"hex-head socket wrench, 3/8"hex-head socket

wrench, #2 Phillips screwdriver, flat-blade screwdriver, 5/le"open-

end wrench, flat 2" putty knife.

IMPORTANT:

All graphics referenced in the following instructions are

included later in this section after "Final Steps." The graphics

shown are for a right-hand swing door (hinges factory installed

on the right).

If you only want to remove and replace the door, see the

"Remove Door and Hinges" and "Replace Door and Hinges."

Before you begin, turn the control OFF, and remove food and

adjustable door or utility bins from door.

Install and Remove Handle

NOTE: If reversing the door swing, move the handle from one side

of the door to the other side.

To install handle:

1. Place the handle on the door as shown. See Handle graphic.

2. Using a flat-blade screwdriver, attach the handle to the door

with the four handle screws (provided).

3. Place the trim pieces on the upper and lower handle ends as

shown.

4. Apply firm pressure with your hand on the face of the trim.

Slide the top trim down and the bottom trim up toward the

handle.

To remove handle:

1. Remove the top and bottom trim.

2. Using a flat-blade screwdriver remove the four handle screws

and lift off the handle.

Remove Door and Hinges

_,/16"Hex-Head Hinge Screw

1. Unplug freezer or disconnect power.

2. Open freezer door and remove base grille from the bottom

front of the freezer. See Base Grille graphic 1A.

3. Close the freezer door and keep it closed until you are ready

to lift it free from the cabinet.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

4. Remove the parts for the top hinge as shown in Top Hinge

graphic 1B.

5. Lift the freezer door free from the lower hinge and cabinet and

set aside.

6. Remove three hex head hinge screws and bottom hinge

assembly. See Bottom Hinge graphic 1C.

Reverse Door (optional on some models)

IMPORTANT: If you want to reverse your door so that it opens in

the opposite direction, continue with "Reverse Door (optional on

some models)" instructions. If you are not reversing the door, see

"Replace Door and Hinges."

Cabinet

1. Remove the cabinet hinge hole plugs from the cabinet top and

move them to the opposite side hinge holes as shown in

Graphic 2.

Remove the door stop screws from the Bottom Hinge bracket.

See Bottom Hinge graphic 1C

Remove the Hinge Pin Nut and Hinge Pin from the hinge

bracket.

Rotate the hinge bracket for installation on the opposite side

of the cabinet. See Graphic 3

Reinstall the Hinge Pin Nut and Hinge Pin to the hinge

bracket. Hinge Pin must point "up" when hinge bracket is

installed to the cabinet.

6. Invert the door stop so that the countersunk holes line up with

the screw holes in the hinge assembly. See Graphic 4

7. Reinstall the door stop screws. See Graphic 3.

8. Reinstall the hinge bracket to the cabinet with the three hex

head hinge screws.

Replace Door and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown and tighten

screws. See Bottom Hinge graphic 1C. Replace the freezer

door.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

2. Assemble the parts of the top hinge as shown in the Top

Hinge graphic 1B. Do not tighten the screws completely.

3. Line up the door so that the bottom aligns evenly with the

cabinet. Tighten all screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are in

place. Reinstall top hinge cover. See Top Hinge graphic 1B.

2. Replace the base grille. See Base Grille graphic 1A.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

3. Plug into a grounded 3 prong outlet.

4. Reset the control. See "Using the Control."

5. Return all removable door parts to door and food to freezer.

Base Grille

Top Hinge

A. Top Hinge Cover

B. 3/8" Hex-Head Hinge Screws

C. Top Hinge

Bottom Hinge

A. Door Stop Screws

B. Door Stop

C. Hinge Pin

D. Hinge Pin Nut

E. 5/8"Hex-Head Hinge Screws

A.................................._

A. CabinetHinge Hole Plugs

Left Hand Hinge Right Hand Hinge

Door Stop Door Stop I

r 11

A. Door Stop Screws

B. Door Stop

C. Hinge Pin

D. Hinge Pin Nut

E. 5/8"Hex-Head Hinge

Screws

Door Handle

Seal Screw

Locate the two front leveling legs taped among the packing

materials.

Screw these legs into the front holes on the bottom of the

freezer. The back of the freezer rests on two fixed supports.

Adjust the front legs enough to lift the cabinet up off of the

floor.

NOTE: If your model is equipped with rollers, the front legs

should be lowered enough to lift the rollers off of the floor to

ensure the freezer does not roll forward when the door is

opened.

Place a leveling tool on top of the freezer first side to side,

then front to back. Turn leg counterclockwise to raise a corner.

Turn leg clockwise to lower a corner.

5. Repeat Step 4 until freezer is level.

6. After freezer is fully loaded with food, recheck with level as in

Step 4.

The outside of your freezer may feel warm. This is normal. The

freezer's design and main function is to remove heat from

packages and air space inside the freezer. The heat is transferred

to the room air, making the outside of the freezer feel warm.

Adjusting Control

Turn control to a higher number for colder temperatures.

Turn control to a lower number for less cold temperatures.

NOTE: The small snowflake icon represents the number 1 or

the least cold setting. The large snowflake icon represents 6 or

the coldest setting.

FREEZERUSE

In order to ensure proper temperature, you need to permit proper

airflow in the freezer. As shown inthe illustration, cool air enters

through the freezer wall and moves down. The air then

recirculates through the vent near the bottom.

Do not block any of these vents with food packages. If the vents

are blocked, airflow will be restricted, and temperature and

moisture problems may occur.

IMPORTANT: To avoid odor transfer and drying out of food, wrap

or cover foods tightly.

Turn the freezer temperature control to 4. This setting is designed

to maintain the temperature at or near 0°F (-17.8°C) under normal

operating conditions.

Allow the freezer to cool 6 to 8 hours before filling with frozen

food. Let the freezer cool overnight before adding large amounts

of unfrozen food. Do not add more than 2 to 3 Ibs (907 to 1,350 g)

of unfrozen food per cubic foot (28.32 L) of freezer space.

NOTE: When the freezer is first started, the compressor will run

constantly until the freezer is cooled. It may take up to 6 or

8 hours (or longer), depending on room temperature and the

number of times the freezer door is opened. After the freezer is

cooled, the compressor will turn on and off as needed to keep the

freezer at the proper temperature.

This setting causes the freezer to run continuously, driving the

freezer temperature to the coldest possible temperature. To

activate, adjust the control knob to the igloo icon, which

represents the fast freeze setting. Use this feature just before

adding large amounts of unfrozen foods. For best food quality, do

not exceed 3 Ibs (1,350 g) per cubic foot (28.32 L). Return to your

normal setting after 24 to 48 hours.

Temperature Alarm (on some models)

The temperature monitor alarm is located to the left of the

temperature control and sounds an audible alarm if the

temperature reaches 10°F (-12°C) or more above normal for the

selected setting.

The alarm is controlled by a three-position switch.

The proper setting for normal freezer use. The alarm

is on, and the amber light will be illuminated.

Keeps the alarm from sounding when the freezer is

warm, such as during start-up or defrosting.

Tests the alarm regardless of temperature.

To lock or unlock the freezer, you must hold the key in the lock

while turning. The lock is spring loaded, so the key cannot be left

in the lock.

If the key is lost, contact your dealer for a replacement. Always

give the model and serial number of your freezer when requesting

a replacement key.

FREEZERFEATURES

This manual covers several different models. The freezer you have

purchased may have some or all of the items listed. The locations

of the features may not match those of your model.

Your freezer is equipped with refrigerated interior shelves.

Packages in direct contact with the shelves will have the best

refrigeration. Fresh, unfrozen food packages should be stored

directly on the shelves and not on top of already frozen food

packages.

To Lower and Raise the Storage Gate:

1. Lift the top of the gate up slightly, out of the supports. Pull the

gate forward and down.

2. Return the gate to the upright position. Lift the top of the gate

slightly to clear the supports. Lower the gate into the

supports.

When placing the food packages in your freezer, please

remember:

The cabinet shelves have the best freezing capability. The

door shelves and the bottom of the cabinet have a slightly less

cold temperature. Therefore, packages sensitive to

temperature (meat, poultry, etc.) should not be placed on the

door shelves or the freezer bottom.

• Leave some space between the food packages so that cold

air can pass over and around them.

To remove and replace the bin:

1. Remove the bin by tipping the front of the bin forward and

sliding out.

2. Replace the bin by sliding it in above the desired support

tilting it back into place.

The slide out basket provides separate storage space for items

that are difficult to store on freezer shelves. To remove the basket,

pull out and lift up.

FREEZERCARE

E×plosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Frost-free means that you will not have to defrost your freezer.

Frost is removed by air moving and collecting any moisture and

depositing it on the cooling coil. The cooling coil periodically

warms up enough to melt the frost, and it then flows down to the

drain pan (located behind the base grille) where it is evaporated.

Complete cleaning should be done at least once a year.

1. Unplug freezer or disconnect power.

2. Remove all frozen food. Wrap frozen food in several layers of

newspaper and cover with a blanket. Food will stay frozen for

several hours. You may also store frozen food in a cooler,

additional refrigerator-freezer, or in a cool area.

3. Wash the inside walls with a solution of mild detergent in

warm water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm

water.

Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

Rinse well and wipe dry with a clean soft cloth.

Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners, or cleaners designed for stainless steel. Dry

thoroughly with a soft cloth.

Stainlesssteelfinish:Washwithacleanspongeorsoftcloth

andamilddetergentinwarmwater.Donotuseabrasiveor

harshcleaners.Drythoroughlywithasoftcloth.

Tokeepyourstainlesssteelrefrigeratorlookinglikenew

andtoremoveminorscuffsormarks,itissuggestedthat

youusethemanufacturer'sapprovedStainlessSteel

CleanerandPolish.

IMPORTANT:Thiscleanerisforstainlesssteelpartsonly!

DonotallowtheStainlessSteelCleanerandPolishto

comeintocontactwithanyplasticpartssuchasthetrim

pieces,dispensercoversordoorgaskets.Ifunintentional

contactdoesoccur,cleanplasticpartwithaspongeand

milddetergentinwarmwater.Drythoroughlywithasoft

cloth.

6. Replaceallfrozenfood.

7. Pluginfreezerorreconnectpower.

8. See"UsingtheControl."

To Remove and Replace the Base Grille:

1. Open the freezer door and remove the base grille by pulling

down and out from the top.

2. Replace the base grille by putting the clips in the openings in

the refrigerator panel. Push in until the base grille snaps into

place.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Defrost and clean your freezer when frost has built up to about

V4"(6 mm) thickness. Complete defrosting and cleaning should be

done at least once a year. In high humidity areas, a freezer may

need more frequent defrosting and cleaning.

Do not use abrasive cleaners on your freezer. Do not use cleaning

waxes, concentrated detergents, bleaches, or cleaners containing

petroleum on plastic parts. Damage can occur.

NOTE: The drain cap must be removed before defrosting the

freezer and replaced securely afterward.

1. Unplug freezer or disconnect power.

2. Remove all frozen food. Wrap frozen food in several layers of

newspaper and cover with a blanket. Food will stay frozen for

several hours. You may also store frozen food in a cooler, an

additional refrigerator or freezer, or a cool area.

Remove base grille. See "Base Grille."

Style 1-Models with a drain system

Reach under the unit and pull the drain hose out through the

opening. The drain hose carries defrost water out of the

freezer, and through the area behind the base grille. Place a

large shallow pan under the drain hose. Remove the drain cap

inside freezer.

NOTE: Check the drain pan frequently to avoid water

overflow. Have a second pan handy for easier emptying.

Style 2-Models without a drain system

Remove water from the freezer bottom using a sponge or

baster and empty the water into a large pan.

5. Place pans of hot water in freezer with door open to speed

melting. Directing air from an electric fan into freezer will also

help. Do not place fan or any electrical device in freezer.

6. Use a plastic scraper to remove frost.

NOTE: Do not use an ice pick, knife, or other sharp-pointed

tool to defrost freezer. Damage can occur.

10.

Wipe water from walls with a towel or sponge.

Wash the inside walls with a solution of mild detergent in

warm water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm

water. Do not use abrasive or harsh cleaners.

Rinse well and wipe dry with a clean soft cloth.

Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners, or cleaners designed for stainless steel. Dry

thoroughly with a soft cloth.

Stainless steel finish: Wash with a clean sponge or soft cloth

and a mild detergent in warm water. Do not use abrasive or

harsh cleaners, or cleaners designed for stainless steel. Dry

thoroughly with a soft cloth.

To keep your Stainless Steel refrigerator looking like new

and to remove minor scuffs or marks, it is suggested that

you use the manufacturer's approved Stainless Steel

Cleaner and Polish.

IMPORTANT: This cleaner is for Stainless Steel parts only!

Do not allow the Stainless Steel Cleaner and Polish to

come into contact with any plastic parts such as the trim

pieces, dispenser covers or door gaskets. If unintentional

contact does occur, clean plastic part with a sponge and

mild detergent in warm water. Dry thoroughly with a soft

cloth. To order the cleaner, see "Accessories."

11. For models with a drain system, you should replace the drain

hose, drain cap and base grille.

12. Replace all frozen food.

13. Plug in freezer or reconnect power.

14. See "Using the Control."

NOTE: Not all appliance bulbs will fit your freezer. Be sure to

replace the bulb with one of the same size, shape, and wattage.

Style 1

1. Unplug freezer or disconnect power.

2. Replace the light bulb with an appliance bulb of the same

wattage.

3. Plug in freezer or reconnect power.

Style 2

1. Unplug freezer or disconnect power.

2. Remove the light shield. From the front of the light shield,

push backward and down.

3. Replace the light bulb with an appliance bulb of the same

wattage.

4. Replace the light shield.

5. Plug in freezer or reconnect power.

If the power will be out for 24 hours or less, keep the door closed

to help food stay cold and frozen.

If the power will be out for more than 24 hours, do one of the

following:

• Remove all frozen food and store it in a frozen food locker.

• If a food locker is not available, consume or can perishable

food at once.

After the power is restored, unplug the freezer for 30 minutes, to

allow the refrigeration system to equalize. During this time keep

the door closed whenever possible.

REMEMBER: A full freezer stays cold longer than a partially filled

one. A freezer full of meat stays cold longer than a freezer full of

baked goods. If you see that food contains ice crystals, it may be

refrozen, although the quality and flavor may be affected. If the

condition of the food is poor, dispose of it.

When you are moving your freezer to a new home, follow these

steps to prepare it for the move.

1. Remove all frozen food.

2. Unplug the freezer.

3. Take out all removable parts, wrap them well, and tape them

together so they don't shift and rattle during the move.

4. Clean the freezer thoroughly.

5. Tape the freezer shut and tape the electrical cord to the

cabinet.

When you get to your new home, refer to the "Installation

Instructions" and "Freezer Use" sections for information on

installation and setting the controls.

TROUBLESHOOTING

Trythe solutions suggested here first to avoid the cost of an unnecessary service call...

Your freezer will not operate

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Has a household fuse blown or circuit breaker tripped?

Replace the fuse or reset the circuit breaker.

Is the Temperature Control turned to the OFF position?

See "Using the Control."

Is the freezer defrosting (on some models)? Recheck to see

whether the freezer is operating in 30 minutes. Your freezer will

regularly run an automatic defrost cycle.

• Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

The lights do not work

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

Is a light bulb loose in the socket or burned out? See

"Changing the Light Bulb."

There is water in the defrost drain pan (on some models)

Is the freezer defrosting? The water will evaporate. It is

normal for water to drip into the defrost pan.

Is it more humid than normal? When it is humid, expect that

the water in the defrost pan will take longer to evaporate.

The motor seems to run too much

• Is there excessive frost or a package keeping the door

from closing? Defrost and clean the freezer, or move the

package so the door closes properly.

Is the room temperature hotter than normal? The motor will

run longer under warm conditions. At normal room

temperatures, your motor will run about 40% to 80% of the

time. Under warmer conditions, it will run even more.

Has a large amount of food just been added to the

freezer? Adding a large amount of food warms the freezer.

The motor normally will run longer to cool the freezer back

down.

Is the door opened often? The motor will run longer when

this occurs. Conserve energy by getting all items out at one

time, keeping food organized, and closing the door as soon as

possible.

Is the control set correctly for the surrounding conditions?

See "Using the Control."

Is the door completely closed? Push the door firmly shut. If

it will not shut all the way, see "The door will not close

completely or is difficult to open" later in this section.

Are the condenser coils dirty (on some models)? This

blocks air transfer and makes the motor work harder. Clean

the condenser coils. See "Freezer Care."

Is the door gasket sealed all the way around? Contact a

qualified person or a technician.

Is there enough air circulation space around the freezer?

See "Location Requirements."

NOTE: If the problem is not due to any of the above,

remember that your new freezer will run longer than your old

one due to its high-efficiency motor.

The ice maker is not producing ice or not enough ice

(on some models)

• Has the ice maker just been installed? Wait 72 hours for full

ice production to begin. Once your freezer is cooled, the ice

maker should produce 70-120 cubes every 24 hours.

Is the freezer temperature cold enough to produce ice?

Wait 24 hours after hookup for ice production. See "Using the

Control."

Is the wire shutoff arm in the OFF (arm up) position? Lower

the wire shutoff arm to the ON (arm down) position. See "Ice

Maker."

Is the water line shutoff valve to the freezer turned on?

Turn on the water valve. See "Connect the Water Supply."

Does the ice maker mold have water in it or has no ice

been produced? Be sure your freezer has been connected to

a water supply and the supply shutoff valve is turned on. See

"Connect the Water Supply."

Is an ice cube jammed in the ejector arm? Remove the ice

from the ejector arm with a plastic utensil. See "Ice Maker."

Has a large amount of ice just been removed? Allow

24 hours for ice maker to produce more ice.

Is the control set correctly? If too little ice is produced, see

"Using the Control."

NOTE: If not due to any of the above, there may be a problem

with the water line. Call for service.

Off-taste, odor or gray color inthe ice (on some models)

• Are the plumbing connections new, causing discolored or

off-flavored ice? Discard the first few batches of ice.

• Have the ice cubes been stored too long? Throw old ice

away and make a new supply.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

• Do the freezer and ice bin need to be cleaned? See

"Freezer Care."

• Does the water contain minerals (such as sulfur)? A filter

may need to be installed to remove the minerals.

Temperature is too warm

• Are the air vents blocked? Move objects away from the air

vents. See "Ensuring Proper Air Circulation" for air vent

locations.

Is the door opened often? Be aware that the freezer will

warm when this occurs. In order to keep the freezer cool, try

to get everything you need out of the freezer at once, keep

food organized so it is easy to find, and close the door as

soon as the food is removed.

Has a large amount of food just been added to the

freezer? Adding a large amount of food warms the freezer. It

can take several hours for the freezer to return to the normal

temperature.

• Is the control set correctly for the surrounding conditions?

See "Using the Control."

The door will not close completely or isdifficult to open

Are food packages blocking the door? Rearrange

containers so that they fit more tightly and take up less space.

Are the shelves and basket out of position (on some

models)? Put the shelves and basket back into their correct

positions.

The freezer clicks but does not run

• Has the local power failed? Unplug the freezer for

30 minutes to allow the refrigeration system to equalize.

During this time, keep the door closed whenever possible.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Are the gaskets dirty or sticky? Clean gaskets according to

the directions in "Freezer Care."

Does the freezer wobble or seem unstable? See "Adjust

the Door."

ASSISTANCEORSERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of aservice call. Ifyou

still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If You Need Replacement Parts

If you need to order replacement parts, we recommend that you

only use factory specified replacement parts. Factory specified

replacement parts will fit right and work right because they are

made with the same precision used to build every new Amana ®

appliance.

To locate factory specified replacement parts in your area, call us

or your nearest designated service center.

For assistance, installation or service call Amana ®Appliances toll

free: 1-800-688-9900.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Installation information.

Use and maintenance procedures.

Accessory and repair parts sales.

Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

Referrals to local dealers, repair parts distributors, and service

companies. Amana Appliances designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in the United States.

To locate the Amana ®appliances designated service company

in your area, you can also look in your telephone directory

Yellow Pages.

For Further Assistance

If you need further assistance, you can write to Amana ®

Appliances with any questions or concerns at:

Amana Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

For assistance, installation or service toll free: 1-800-807-6777.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Use and maintenance procedures.

• Accessory and repair parts sales.

Referrals to local dealers, repair parts distributors, and service

companies. Amana Appliances designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For Further Assistance

If you need further assistance, you can write to Amana ®

Appliances with any questions or concerns at:

Amana Brand Home Appliances

Customer eXperience Center

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

Please include a daytime phone number in your correspondence.

To order accessories, call 1-800-843-0304 or contact your

authorized Amana ®Appliances dealer. In Canada, call

1-800-807-6777.

AMANA®MAJORAPPLIANCEWARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Amana brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter "Amana") will pay for factory

specified parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased.

Service must be provided by an Amana designated service company. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. This limited warranty is valid only in the United States or Canada

and applies only when the major appliance is used in the country in which it was purchased. Proof of original purchase date is required

to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is

used in a manner that is inconsistent to published user or operator instructions and/or installation instructions.

2. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or

repair house fuses, or to correct house wiring or plumbing.

3. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty

coverage.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by Amana.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Amana within 30 days from the date of purchase.

6. Any food or medicine loss due to refrigerator or freezer product failures.

7. Pickup and delivery. This major appliance is intended to be repaired in your home.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Amana servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance

with Amana's published installation instructions.

11. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered or

cannot be easily determined.

12. Any damage or discoloration of dry-erase door surface caused by markers other than dry-erase markers in the recommended

colors listed in the Use and Care Guide.

13. Any damage or discoloration caused by any marker to refrigerator surfaces that are not designated as dry-erase surfaces.

14. Discoloration, rust, or oxidation of stainless steel surfaces.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR

A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces

do not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This

warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

AMANA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the

exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty

gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

If outside the 50 United States and Canada, contact your authorized Amana dealer to determine if another warranty applies.

If you think you need repair service, first see the "Troubleshooting" section of the Use & Care Guide. If you are unable to resolve the

problem after checking "Troubleshooting," additional help can be found by checking the "Assistance or Service" section or by calling

Amana. In the U.S.A., call 1-800-843-0304. In Canada, call 1-800-807-6777. 5/o8

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

# # #

SECURITEDUCONGELATEUR

Votre securite et celle des autres est tres importante.

Nous donnons de nombreux messages de s_curit_ importants dans ce manuel et sur votre appareil m_nager. Assurez-vous de

toujours lire tousles messages de s_curit_ et de vous y conformer.

Voici le symbole d'alerte de s_curit&

Ce symbole d'alerte de s_curit_ vous signale les dangers potentiels de d_c_s et de blessures graves & vous

et &d'autres.

Tousles messages de s_curit_ suivront le symbole d'alerte de s_curit_ et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient •

Risque possible de d_cbs ou de blessure grave si vous ne

suivez pas imm_diatement les instructions.

Risque possible de d_cbs ou de blessure grave si vous

ne suivez pas les instructions.

Tousles messages de s_curit_ vous diront quel est le danger potentiel et vous disent comment r_duire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

llViPORTANTES iNSTRUCTiONS DE S!_CURITi_

AVERTISSEMENT :Pour reduire les risques d'incendie, de choc electrique ou des blessures Iors de I'utilisation du

congelateur, prendre quelques precautions fondamentales, y compris les suivantes "

m Brancher I'appareil sur une prise &3 alveoles reliee &

la terre.

m Ne pas enlever la broche de liaison & la terre.

m Ne pas utiliser un adaptateur.

m Ne pas utiliser un c&ble de rallonge.

m Debrancher la source de courant electrique avant

I'entretien.

m Replacer pieces et panneaux avant de faire la remise en

marche.

m Utiliser un produit de nettoyage ininflammable.

• Garder les materiaux et les vapeurs inflammables, telle que

I'essence, loin du congelateur.

• Utiliser deux ou plus de personnes pour deplacer et

installer le congelateur.

• Garder la cle loin des enfants.

• Enlever les portes ou le couvercle de votre vieux

congelateur ou r6frigerateur.

• Debrancher la source de courant electrique avant

I'installation de la machine & glagons (seulement pour

modeles pr_ts &recevoir une machine & glagons).

CONSERVEZ CES iNSTRUCTiONS

Miseaurebutappropri e devotrevieux

cong( lateurou r( frig( rateur

Risque de suffoquer

Enlever les portes ou le couvercle de votre vieux

cong_lateur ou r_frig_rateur.

Le non-respect de cette instruction peut causer

un d_c_s ou des I_sions c_r_brales.

IMPORTANT : Le probleme des enfants trouves enfermes ou

etouff6s n'est pas nouveau. Les congelateurs ou refrig6rateurs

jetes ou abandonnes presentent des dangers, m_me s'ils sont

abandonnes pendant "quelques jours" seulement. Si vous vous

debarrassez de votre vieux refrig6rateur ou congelateur, veuillez

suivre les instructions suivantes pour aider a eviter les accidents.

Avant de mettre au rebut votre vieux cong_lateur ou

r_frig_rateur :

• Enlever les portes ou le couvercle.

• Laisser les tablettes en place, de sorte que les enfants ne

puissent pas facilement se glisser a I'interieur.

INSTRUCTIONSD'INSTALLATION

Risque du poids excessif

Utiiiser deux ou plus de personnes pour d6piacer et

installer le cong6iateur.

Le non-respect de cette instruction peut causer

une biessure au dos ou d'autre biessure.

Enl6vement des mat6riaux d'emballage

• Enlever le ruban adhesif et la colle des surfaces du

congelateur avant de le mettre en marche. Frotter une petite

quantite de savon liquide pour la vaisselle sur I'adhesif avec

les doigts. Rincer a I'eau tiede et essuyer.

Ne pas utiliser d'instruments coupants, d'alcool & friction, de

liquides inflammables ou de nettoyants abrasifs pour enlever

le ruban adhesif ou la colle. Ces produits peuvent

endommager la surface de votre congelateur. Pour plus de

renseignements, voir "Securit6 du congelateur".

D6placement de votre cong61ateur :

Votre congelateur est Iourd. Lors du deplacement de votre

congelateur pour le nettoyage ou un entretien, veiller &

recouvrir le plancher avec du carton ou un panneau de fibre

dur pour eviter qu'il ne subisse tout dommage. Toujours

tirer le congelateur tout droit Iors du deplacement. Ne pas

incliner le congelateur d'un c6te ou de I'autre nile "faire

marcher" en essayant de le deplacer car le plancher pourrait

_tre endommag&

Nettoyage avant I'utilisation

Apres avoir enleve tousles materiaux d'emballage, nettoyer

I'interieur du congelateur avant I'utilisation. Voir les instructions de

nettoyage a "Entretien du congelateur".

Importants renseignements a savoir au sujet des tabiettes

et des couvercies en verre :

Ne pas nettoyer les tablettes ou couvercles en verre avec de

I'eau tilde quand ils sent froids. Les tablettes et les

couvercles peuvent se briser s'ils sent expos6s a des

changements soudains de temperature ou & un impact tel

que coup brusque. Le verre tremp_ est con£u pour 6clater

en d'innombrables pieces minuscules. Ceci est normal. Les

tablettes et les couvercles en verre sont Iourds. Les saisir

deux mains Iors de leur d_pose afin d'_viter de les faire

tomber.

Risque d'explosion

Garder les mat6riaux et les vapeurs inflammables, teiie

que I'essence, loin du cong_iateur.

Le non=respect de cette instruction peut causer

un d6c_s, une explosion ou un incendie.

IMPORTANT : Ne pas installerle congelateur pros d'un four, d'un

radiateur ou d'une autre source de chaleur, ni dans un endroit oQ

la temperature baissera au-dessous de 40°F (5°C).

Verifier la solidite du plancher avant d'installer le congelateur. Le

plancher dolt supporter le poids d'un congelateur entierement

rempli d'aliments.

Laisser un espace d'au moins 3" (7,5 cm) en haut et des deux

c6tes du congelateur et de 1" (2,5 cm) entre I'arriere du

congelateur et lemur. Si le congelateur doit _tre contre un mur,

laisser un espace plus grand du c6te des charnieres pour que

la porte puisse s'ouvrir plus.

REMARQUE : Ce congelateur peut _tre installe c6te & c6te avec

un autre refrig6rateur ou congelateur. Laisser un degagement de

3" (7,5 cm) sur le dessus et les c6tes et un degagement de

1¼.(0,64 cm) entre les appareils.

3" (7_5era)

Risque de choc _lectrique

Brancher sur une prise a 3 alv_oles reli_e a la terre.

Ne pas enlever la broche de liaison a la terre.

Ne pas utiliser un adaptateur.

Ne pas utiliser un c_ble de rallonge.

Le non=respect de ces instructions peut causer

un d_c_s, un incendie ou un choc _lectrique.

Avant de deplacer le congelateur a son emplacement final, il est

important de vous assurer d'avoir le raccordement electrique

appropri&

M_thode recommand_e de mise & la terre

Une source de courant electrique de 115 V, 60 Hz, CA seulement,

et proteg6e par un fusible de 15 ou 20 amperes, adequatement

mise & la terre est necessaire. II est recommande d'utiliser un

circuit distinct pour alimenter uniquement le congelateur. Utiliser

une prise de courant murale qui ne peut pas _tre mise hors circuit

&I'aide d'un commutateur. Ne pas employer un c&ble de rallonge.

REMARQUE :Avant de proceder &tout type d'installation, de

nettoyage ou de changement d'une ampoule, tourner la

commande de temperature a la position d'ARRI_T tel qu'illustre

puis deconnecter le congelateur de la source d'alimentation

electrique.

OUTILLAGE NleCESSAIRE : Cle & douille & t_te hexagonale de

%e", cle &douille &t_te hexagonale de 5/8",cle & douille &t_te

hexagonale de 1/4",cle &douille & t_te hexagonale de 1/2",cle &

douille & t_te hexagonale de 3/8",tournevis Phillips n° 2, tournevis

& lame plate, cle plate de s/le",couteau & mastic plat de 2".

IMPORTANT :

Toutes les illustrations mentionnees dans les instructions

suivantes sont incluses plus loin dans cette section apres

"#tapes finales". Les illustrations correspondent a une porte

s'ouvrant & droite (charnieres installees a droite a I'usine).

• Si vous desirez seulement enlever et reinstaller les portes,

voir "Demontage - Portes et charnieres" et "Reinstallation -

Portes et charnieres".

• Avant de commencer, tourner la commande a OFF (arr_t), et

retirer les aliments et tout balconnet reglable ou

compartiment utilitaire des portes.

Installation et d_pose des poign_es de portes

REMARQUE : Pour inverser le sens d'ouverture de la porte,

retirer la poignee et la transferer d'un c6te &I'autre de la porte.

Installation de la poign_e :

1. Placer la poignee sur la porte tel qu'indiqu& Voir I'illustration

de la poignee.

2. En utilisant un tournevis & lame plate, fixer la poignee sur la

porte & I'aide des quatre vis de poignee (fournies).

3. Placer les differentes parties de la garniture sur les extremites

inferieures et superieures de la poignee, tel qu'indique.

4. Appuyer fermement avec la main sur I'avant de la garniture.

Faire glisser la garniture superieure vers le bas et la garniture

inferieure vers le haut, vers la poignee.

Retrait de la poign_e :

1. Retirer la garniture superieure et inferieure.

2. A I'aide d'un tournevis & lame plate, retirer les quatre vis et

soulever la poignee pour la retirer.

D_montage - Portes et charni_res

Visde charniere_ t#tehexagonale de 5_6"

1. Debrancher le congelateur ou deconnecter la source de

courant electrique.

2. Ouvrir la porte du congelateur et 6ter la grille de la base situee

& I'avant de la partie inferieure du congelateur. Voir la grille de

la base sur I'illustration 1A.

Fermer la porte du congelateur; maintenir les deux portes

fermees jusqu'au moment oQ on est pr_t & les separer de la

caisse de I'appareil.

REMARQUE : Prevoir un support additionnel des portes

pendant la reinstallation des charnieres. La force d'attraction

des aimants des portes ne suffit pas & les maintenir en place.

4. Retirer les pieces de la charniere superieure - voir I'illustration

1B de la charniere superieure.

5. Soulever la porte du congelateur pour la separer de la

charniere inferieure et de la caisse et la conserver & part.

6. Retirer les trois vis de charniere & t_te hexagonale et la

charniere inferieure. Voir I'illustration 1C de la charniere

inferieure.

Inversion du sens d'ouverture des portes

(facultatif - sur certains modules)

IMPORTANT : Si vous souhaitez inverser le sens d'ouverture des

portes, suivre les instructions de la section "Inversion du sens

d'ouverture des portes (facultatif - sur certains modeles)". S'il

n'est pas necessaire de changer I'orientation des portes, voir

"Reinstallation - Portes et charnieres".

Caisse

1. Enlever les bouchons d'obturation des trous de charniere au

sommet de la caisse; transferer ceux-ci dans les trous de

charniere du c6te oppose. Voir I'illustration 2.

2. Retirer les vis de butee de porte de la charniere. Voir

I'illustration 1C de la charniere inferieure.

3. Retirer I'ecrou de I'axe de la charniere et I'axe de la support de

charniere.

4. Faire pivoter la support de charniere pour installer la porte sur

le c6te oppose de la caisse. Voir I'illustration 3.

5. Reinstaller I'ecrou de I'axe de la charniere et I'axe de la

support de charniere. L'axe de la charniere dolt pointer vers le

haut Iorsque la support de charniere est installee sur la caisse.

6. Inverser la butee de porte de fagon & ce que les fraisures

soient alignees avec les trous des vis sur la charniere. Voir

I'illustration 4.

7. Reinstaller les vis de butee de porte. Voir I'illustration 3.

8. Reinstaller la support de charniere sur la caisse a I'aide des

trois vis de charniere a tete hexagonale.

R_installation - Portes et charni_res

REMARQUE : Si on inverse le sens d'ouverture des portes,

considerer I'image symetrique.

1. Replacer les pieces de la charniere inferieure tel qu'illustre et

serrer les vis. Voir I'illustration de la charniere inferieure.

Reinstaller la porte du congelateur.

REMARQUE : Prevoir un support additionnel des portes

pendant la reinstallation des charnieres. La force d'attraction

des aimants des portes ne suffit pas & les maintenir en place.

2. Assembler les pieces de la charniere superieure (voir

I'illustration de la charniere superieure). Ne pas completement

serrer les vis.

3. Aligner la porte de fagon & ce que la ligne inferieure soit de

niveau avec la caisse. Serrer toutes les vis.

I_tapes finales

Inspecter tousles trous. Verifier que tousles bouchons

d'obturation et vis sont en place. Reinstaller le couvercle de la

charniere superieure. Voir I'illustration 1B de la charniere

superieure.

Reinstaller la grille de la base. Voir la grille de la base sur

I'illustration 1A.

Risque de choc _lectrique

Brancher sur une prise a 3 alv_oles reli_e a la terre.

Ne pas enlever la broche de liaison a la terre.

Ne pas utiliser un adaptateur.

Ne pas utiliser un c&ble de rallonge.

Le non=respect de ces instructions peut causer

un d_c_s, un incendie ou un choc _lectrique.

3. Brancher sur une prise & 3 alveoles reliee & la terre.

4. Reinitialiser les commandes. Voir "Utilisation de la

commande".

5. Reinstaller toutes les pieces amovibles des portes et remettre

les aliments dans le compartiment de congelation.

Grille de la base

Charnibre sup6rieure

A. Couvercle de charniere superieure

B. Vis de charniere a t#te hexagonale

de3/8 "

C. Charniere superieure

Charnibre inf6rieure

A. Vis de butee de porte

B. Butee de porte

C. Axe de charniere

D. Ecrou de I'axe de charniere

E. Vis de chamiere a t#te

hexagonale de 5/8"

A...................................._._.

A. Bouchons d'obturation des trous

de charniere de la caisse

Butee de porte de la Butee de porte de la

charniere - cSte gauche charniere - c6te droit I

r 11

A. Vis de butee de porte

B. Butee de porte

C. Axe de charniere

D. Ecrou de I'axe de charniere

E. Vis de chamiere a t#te

hexagonale de 5/8"

Poign6e

A. La garniture de la poignee de porte

B. Vis de poignee

C. Poignee

Visde scellement

de poignee de porte

Localiser les 2 pieds de nivellement _ I'avant joints aux

mat@riaux d'emballage.

Visser ces pieds dans les trous avant, i_la base du

cong@lateur. L'arri@redu congelateur repose sur deux appuis

fixes.

Ajuster les pieds avant juste assez pour soulever le meuble

au-dessus du sol.

REMARQUE : Si votre modele est equipe de roulettes, les

pieds avant doivent _tre suffisamment abaisses pour mettre

les roulettes hors service et s'assurer que le congelateur ne

roule pas vers I'avant Iorsqu'on ouvre la porte.

Placer un niveau au sommet du congelateur d'abord de c6te &

c6te, puis de I'avant & I'arriere. Tourner le pied dans le sens

antihoraire pour rehausser un coin. Tourner le pied dans le

sens horaire pour abaisser un coin.

5. Repeter I'etape 4 jusqu'& ce que le congelateur soit d'aplomb.

6. Lorsque le congelateur est completement rempli d'aliments,

reverifier avec un niveau comme a I'etape 4.

UTILISATIONDUCONGELATEUR

............. t ....... 4;; ........ ............... ,,

Pour s'assurer d'avoir des temperatures appropriees, il faut

permettre a I'air de circuler dans le congelateur. Comme I'indique

I'illustration, I'air froid penetre par la paroi du congelateur et se

deplace vers le bas. L'air recircule ensuite par I'event pres de la

base.

Ne pas obstruer I'une ou I'autre de ces ouvertures d'aeration avec

des emballages d'aliments. Si les ouvertures d'aeration sont

bloquees, le courant d'air sera coupe et des problemes de

temperature et d'humidite peuvent survenir.

IMPORTANT : Pour emp_cher le transfert d'odeurs et

I'assechement des aliments, envelopper ou recouvrir

hermetiquement les aliments.

Tourner la commande de temperature du congelateur & 4. Ce

reglage est destine & maintenir la temperature & ou pres de 0° F

(-17,8 ° C) dans des conditions normales d'utilisation.

Laisser le congelateur refroidir pendant 6 & 8 heures avant de le

remplir d'aliments congeles. Laisser le congelateur refroidir une

nuit avant d'ajouter de grandes quantites d'aliments non

congeles. Ne pas ajouter plus de 2 & 3 Ib (907 & 1350 g)

d'aliments non congeles par pied cube (28,32 L) d'espace de

congelation.

REMARQUE : Lors de la mise en marche initiale du congelateur,

le compresseur fonctionne constamment, jusqu'& ce que le

congelateur soit refroidi. Ce refroidissement peut demander

jusqu'& 6 ou 8 heures (ou plus), selon la temperature ambiante et

la frequence des ouvertures de la porte du congelateur. Lorsque le

congelateur est refroidi, le compresseur s'arr_te et recommence

au besoin, pour maintenir le congelateur & la temperature

appropriee.

L'exterieur du congelateur peut paraitre tiede. Ceci est normal. Le

concept et la fonction principale du congelateur sont d'eliminer la

chaleur des emballages et de I'espace d'air &I'interieur du

congelateur. La chaleur est transferee &I'air de la piece, ce qui

rend I'exterieur du congelateur tiede.

Ajustement de la commande de temperature

Tourner la commande a un chiffre plus eleve pour des

temperatures plus froides.

Tourner la commande a un chiffre plus bas pour des

temperatures moins froides.

REMARQUE : Uic6ne en forme de petit flocon de neige

represente le numero 1 ou le reglage le moins froid. L'ic6ne en

forme de gros flocon de neige represente le numero 6 ou le

reglage le plus froid.

Cong_lation rapide (sur certains modeles) _;

Ace reglage, le congelateur fonctionne continuellement et la

temperature descend au plus bas niveau possible. Pour I'activer,

regler le bouton de commande & I'ic6ne en igloo, le reglage de

congelation rapide. Utiliser cette caracteristique juste avant

d'ajouter de grandes quantites d'aliments non congeles. Pour la

meilleure qualite alimentaire, ne pas depasser 3 livres (1350 g) par

pied cube (28,32 L). Remettre la commande au reglage normal

apres 24 a 48 heures.

La page charge ...

Amana AQF1201TRW03 Le manuel du propriétaire

Marque: Amana

Modèle: AQF1201TRW03

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Amana AQF1201TRW03 Owner's manual

Amana AQF1201TRW03 Le manuel du propriétaire

Amana AQF1201TRW03 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents