Beurer BM 67 Le manuel du propriétaire

Manufactured for/Manufacturado por/

Fabriqué pour :

Beurer North America LP

900 N Federal Highway, Suite 300

Hallandale Beach, FL 33009

www.beurer.com

Questions or comments?

Call toll free 1-800-536-0366 or contact info@beurer.com

¿Preguntas o comentarios? Llame gratis al

1-800-536-0366 o póngase en contacto info@beurer.com

Questions ou commentaires? Appeler gratuitement

1-800-536-0366 ou communiquez avec info@beurer.com

ENGLISH

Blood Pressure Monitor

Instructions for use .......................... 3

ESPAÑOL

Tensiómetro

Manual de instrucciones ............... 28

FRANÇAIS

Tensiomètre

Mode d’emploi ................................ 55

BM 67

READ THIS MANUAL COMPLETELY AND CAREFULLY BEFORE USING THIS PRODUCT

Keep this manual in a safe location for future reference

LEA TODO ESTE MANUAL CON ATENCIÓN ANTES DE USAR ESTE PRODUCTO

Conserve este manual en un lugar seguro para consultarlo en el futuro

LISEZ CE MODE D’EMPLOI COMPLÈTEMENT ET ATTENTIVEMENT AVANT

D’UTILISER CE PRODUIT

Conservez ce manuel en lieu sûr pour y faire référence ultérieurement

3

1. IMPORTANT SAFETY NOTES

Signs and symbols

Whenever used, the following signs identify safety and

property damage messages and designate a level of

hazard or seriousness.

READ THIS ENTIRE MANUAL, THE SAFETY SEC-

TION AND ALL INSTRUCTIONS AND WARNINGS

COMPLETELY AND CAREFULLY BEFORE USING

THIS PRODUCT. FOLLOW ALL SAFETY INSTRUC-

TIONS AND WARNINGS TO AVOID HAZARDOUS

SITUATIONS AND TO MAKE CORRECT USE OF

THIS PRODUCT.

This is the safety alert symbol. It

alerts you to potential personal

injury hazards. Obey all safety

messages that follow this symbol

to avoid possible injury or death.

WARNING WARNING indicates a hazardous

situation which, if not avoided,

could result in death or serious

injury.

ENGLISH

Contents

1. IMPORTANT SAFETY NOTES ............................... 3

2. Indication for use ................................................. 13

3. Important Information ........................................ 13

4. Package Contents ............................................... 13

5. Device description .............................................. 14

6. Preparing for Measurement ............................... 15

7. Measuring Blood Pressure ................................. 16

8. Evaluating Results ............................................. 19

9. Displaying and Deleting Measurements ......... 20

10. Care and Maintenance ...................................... 22

11. Troubleshooting Guide ...................................... 22

12. Specifications .................................................... 22

13. FCC Statement .................................................. 24

14. Warranty ............................................................. 25

4

CAUTION CAUTION indicates a hazardous

situation which, if not avoided,

may result in minor or moderate

injury.

NOTICE NOTICE addresses practi-

ces not related to person-

al injury, such as product

and/or property damage.

WARNING:

•

Consult your physician or pharmacist before start-

ing to measure your blood pressure.

•

Read and understand all instructions and warnings

before using this device.

•

Like any oscillometric blood pressure measure-

ment devices, certain medical conditions can af-

fect the measurement accuracy, among others:

– disorder of the cardiac rhythm

– very low blood pressure

– patients in shock

– patients with very low blood perfusion

– diabetes

– vessel anomalities

– people with electrical implants, such as a car-

diac pacemaker

– women who are pregnant.

•

Due to their condition the oscillometric measure-

ment method can produce incorrect readings. This

represents a risk for your health, since values may

be interpreted incorrectly. Always consult your

physician to determine what will be suitable for you.

•

This product does not and is not intended to pro-

vide a medical diagnosis. Measurements results are

for reference only. Self-diagnosis and treatment,

e.g. regarding medication, using measured results

represent a risk for your health. Always consult with

a licensed physician for determination of appro-

priate medication and dosage thereof. Follow the

instructions of your physician or licensed health-

care provider. If you have or suspect that you have

a medical problem, promptly consult your phys-

ician. If you have an emergency please call 911 im

-

mediately.

5

•

Only a physician or a trained health care profession-

al who is familiar with your medical history is able

to accurately interpret your blood pressure meas-

urements. Consult your physician before starting

blood pressure monitoring.

•

This product is not intended to serve as a substi-

tute for the advice of a physician or medical profes-

sional. This product is not intended to substitute for

regular medical checkups. Contact your physician

for specific information about your blood pressure.

•

Please note that technically related measuring toler-

ances are possible. Please see section ’12. Speci-

fications’ for details. NOTE: A single measurement

does not provide an accurate indication of your true

blood pressure. You need to take and record sev-

eral readings over a period of time. Try to measure

your blood pressure at the same time each day for

consistency.

•

Any cuff related blood pressure measurement in

high repetition rates, can lead to severe measure-

ment side effects, e.g.

– any nerv compression with temporary arm/hand

paralysis

– the release of an arterial or venous thrombus,

which can cause a life threatening situation.

•

Please contact your physician about the specific

risks of cuff pressure in your specific case.

•

The ’irregular heartbeat’ function does not replace

a cardiac examination, but may help to detect po-

tential pulse irregularities at an early stage. Always

consult your physician to determine what will be

suitable for you.

•

The ’irregular heartbeat’ function is not designed

for diagnosing or treating an arrhythmic disorder.

Arrhythmia can only be ascertained by a licensed

physician.

•

The WHO chart is not intended to replace a medical

diagnosis. This chart is only a reference for differ-

ent classifications of blood pressure.

•

If you notice abnormal or suspicious variations in

blood pressure measurements, consult your phys-

ician immediately.

•

Women who underwent a breast or axillar lymph

node removal operation should consult a phys-

ician or licensed healthcare provider before start-

ing blood pressure measurements.

6

•

Prior to use, you have to ensure that the blood pres-

sure monitor is free of damage. If in doubt, do not

use the unit and contact customer service at 1-800-

536-0366.

•

This device is intended only for personal, non-com-

mercial, adult use in measuring blood pressure and

pulse rate. Do not use the product for any other

purpose. This product is not intended for use in

a hospital, physician’s office, or any other health

care facility.

•

The unit must be used in accordance to the speci-

fied ambient conditions, otherwise the accuracy of

readings might be affected. See section ’10. Care

and Maintenance’ and section ’12. Specifications’

for details.

•

Do not wrap the cuff around body parts other than

your arm. Misuse represents a risk to your health.

•

Please do not share the cuff with other persons, to

avoid cross infection.

•

Use this monitor only on humans.

•

This product is not intended for use by or on chil-

dren, toddlers and infants or on persons who can-

not express their consent, e.g. persons with men-

tal disorders or the like. Consult your physician for

alternative methods of measuring a child’s blood

pressure.

•

This product is not a toy. Keep it out of reach of

children, toddlers, and infants.

•

Keep the product out of the reach of pets.

•

Packaging materials are a deadly hazard for chil-

dren and can cause suffocation. Remove all pack-

aging materials immediately and keep them away

from children at all times.

•

This product contains small parts that may present

a choking hazard to children. Keep the unit and all

parts out of reach of children. NEVER LEAVE CHIL-

DREN OR THOSE WHO REQUIRE CLOSE SUPER-

VISION UNATTENDED WITH THIS DEVICE.

•

The tubing presents a strangulation hazard. Keep

this product away from children and those who re-

quire close supervision, e.g. people with mental

disorders. NEVER LEAVE CHILDREN OR THOSE

WHO REQUIRE CLOSE SUPERVISION UNATTEND-

ED WITH THIS DEVICE.

•

Do not drape tube around neck. This presents a

strangulation hazard.

7

•

People with disabilities, activity limitations, or who

are physically frail, should be assisted by another

person when using this unit.

•

Proper cuff size is important for accurate measure-

ments. Only use the device on adults who have the

right upper arm circumference for this instrument.

See section ’12. Specifications’ for suitable upper

arm circumferences.

•

Do not use any cuffs, tubes, parts and accessor-

ies other than those explicitly recommended by

the manufacturer for use with this product. Parts

and accessories not approved for use with the de-

vice may cause damage to your health and to the

product.

•

Electromagnetic interference: Avoid strong elec-

trical or electromagnetic fields in the direct vicinity

of the device (e.g. mobile telephones, microwave

ovens) while it is in operation, as inaccurate meas-

urements may result. To prevent such interference,

use the unit at a sufficient distance from such de-

vices or turn the devices off.

•

The blood pressure monitor must not be used in

connection with a high-frequency surgical unit.

•

Do not measure your blood pressure while oper-

ating a vehicle or in any situation which requires

your full attention.

•

During the blood pressure measurement, blood

circulation must not be stopped for an unneces-

sarily long time. If the device malfunctions, remove

the cuff from the arm.

•

Avoid any mechanical restriction, compression or

bending of the cuff line.

•

Do not allow sustained pressure in the cuff or fre-

quent measurements. The resulting restriction of

the blood flow may cause injury.

•

Ensure that the cuff is not placed on an arm in

which the arteries or veins are undergoing medical

treatment, e.g. intravascular access or therapy, or

an arteriovenous (AV) shunt.

•

Do not use the cuff on people who have undergone

a mastectomy.

CAUTION:

•

The device should not be used when your arm has

been wounded/injured or when a catheter has been

inserted. Such use may result in injury.

8

•

Remove any kind of arm jewelry or the like before

taking a measurement. This could cause bruises.

•

Do not place the cuff over heavy clothing (e.g. a

jacket or sweater sleeve) as the blood pressure

monitor will not be able to take a proper measure-

ment and there is an elevated danger of acquiring

hematoma or skin marks during the course of the

measurement.

•

In case the cuff does not stop inflating, interrupt

the measurement by pressing the start/stop but-

ton and open the cuff at once.

•

Do not disassemble the unit, it may result in in-

juries.

•

When applying the cuff, make sure there are no

wrinkles in the cuff. This could cause bruises.

•

Do not exert any kind of pressure on the hose

during measurement, e.g. laying your arms or any

other object on the hose. This could cause in-

correct measurements.

•

Blood pressure measurements can lead to tempor-

ary marks on the skin at the site of the cuff place-

ment. This is especially the case in high repetition

rates, in hypertonic patients and in patients with

weak pulses. In rare cases a mark may persist for

a couple of days. Please contact your physician

about these specific risks of cuff pressure in your

specific case.

•

For hygienic reasons the cuff is intended only for

the use by one person.

•

Prolonged over-inflation (cuff pressure exceeds

300 mmHg or maintained above 15 mmHg for long-

er than 3 minutes) of the bladder may cause ec-

chymoma of your arm.

•

Please note that when inflating, the functions of

the limb in question may be impaired.

•

Do not place the cuff over wounds as this may

cause further injury.

•

The accuracy of any blood pressure measurement

with this device can be affected by a multitude

of causes. Some can be avoided some have to

be accepted at the time of measurement. Speak

with your physician about possible causes affect-

ing your blood pressure.

•

Do not inflate the cuff unless wrapped around arm.

•

Do not touch the unit, the tube and cuff and/or

press any buttons when measurement is in prog-

9

ress, except for stopping the measurement. Doing

so may cause incorrect readings.

NOTICE:

•

The blood pressure monitor is made up of preci-

sion electronic components. Accuracy of readings

and the instrument’s service life depend on care-

ful handling. Protect the unit against hard knocks

(e.g. dropping the unit), moisture, water, dirt, dust,

chemicals, extreme hot or cold temperatures, ma-

jor temperature fluctuations, direct exposure to

sunlight and heat sources which are too close

(e.g. stoves, heating radiators). This may damage

the unit. The device must be stored in the speci-

fied ambient conditions. Please see section ’10.

Care and Maintenance’ and section ’12. Specifi-

cations’ for details.

•

Do not use any aggressive solvents, cleaning

agents, detergents or any other strong chemicals

to clean the device.

•

Never immerse and or spill water or any other liquid

onto the monitor or any components, otherwise li-

quid will enter it and cause damage.

•

Do not wash the unit in a washing machine, dish

washer or tumble dryer.

•

Observe the local regulations for material disposal.

Dispose of the device, components and optional

accessories according to applicable local regula-

tions. Unlawful disposal may cause environment-

al pollution.

•

Never attempt to repair, open and/or disassemble

the unit (including cuff and optional accessory) or

adjust it yourself. This may damage the unit and

impair the functions. If you need to have the unit

repaired, please contact our customer service.

Please see warranty for service contact. Before

submitting any complaint, first check the batter-

ies and replace them if necessary.

•

Changes or modifications to the device will nullify

the user warranty.

•

Do not drop or insert any object into any opening

or hose. This may damage the unit.

•

Do not press the buttons with excessive force or

with pointed objects.

10

•

To conserve the batteries, the monitor switches

off automatically if no buttons are pressed for one

minute.

•

The device is only intended for the purpose de-

scribed in these instructions for use. The manu-

facturer is not liable for damage resulting from im-

proper or careless use.

•

If you are using the unit for the first time, please re-

move the protective film from the display.

•

The monitor can maintain the safety and per-

formance characteristics for a minimum of 10.000

measure ments or 3 years.

•

Further documents which include information for

the Calibration of the device can be asked at the

service address.

•

The device can be tested in case of supposed

inaccu racy every two years. Please contact the

nearest ser vice address.

Cleaning and storing the device and cuff

To keep your digital blood pressure monitor in the best

condition and protect the unit from damage follow the

directions listed below:

•

C

lean your device and cuff carefully only with a

slightly moistened soft cloth and dry it immediately

with a soft dry cloth. Do not press.

•

W

hen storing the device, make sure that no heavy

objects are placed on top of it.

•

D

o not fold the cuff and tubing tightly. The cuff tube

should not have any sharp kinks and keep it away

from sharp edges.

•

I

f the unit is stored near freezing, allow it to acclim-

ate to room temperature before use.

•

A

lways store the unit in its storage pouch after use.

•

T

his unit may not meet its performance specifica-

tions if stored or used outside of the temperature and

humidity ranges (see section ’12. Specifications’).

•

U

se the unit consistent with the instruction provided

in this manual.

Advice on use

•

For consistency, always measure your blood pres-

sure at the same time each day.

•

Always wait at least 5 minutes between measure-

ments to allow the blood circulation in your arm to

return to normal. You may need to increase the wait

11

time depending on your individual physiological

characteristics. Because of normal physiologic chan-

ges and the many external factors influencing blood

pressure, it is unusual to obtain identical blood pres-

sure measurements, even when taken a few minutes

apart. Speak with your physician to determine what

is affecting your blood pressure and which variation

may be seen as normal in your case.

•

When performing multiple measurements on an in-

dividual, wait five minutes between each measure-

ment.

•

Do not take a measurement within 30 minutes of eat-

ing, drinking, smoking or exercising. You should not

be physically tired or exhausted while taking meas-

urement.

•

Repeat the measurement if you are unsure of the

results.

•

Measurements are for your information only – they

are no substitute for a medical examination. Discuss

the measurements with your doctor and never base

any medical decisions on them (e.g. medicines and

their administration).

•

Do not use the blood pressure monitor on newborns,

pregnant women or patients with pre-eclampsia.

Consult your doctor before using the blood pres-

sure monitor during pregnancy.

•

Cardiovascular diseases may lead to incorrect meas-

urements or have a detrimental effect on measure-

ment accuracy. The same also applies to very low

blood pressure, diabetes, circulatory disorders and

arrhythmias as well as chills or shaking.

•

For reliable monitoring and reference of blood pres-

sure, keeping long-term records is recommended.

•

To minimize measurement variations due to physic-

al activity, rest at least 5 minutes before measuring

your blood pressure (or 15 minutes after strenuous

activity).

•

Stress raises blood pressure.

•

Perform measurements in a quiet and relaxed en-

vironment at room temperature.

12

Battery Handling Safety Precautions

•

Use only the size and type of batteries specified.

•

Be sure to follow the correct polarity when installing

the batteries. Reversed batteries may cause dam

-

age to the device.

•

Do not mix different types of batteries together (e.g.

Alkaline and Carbon-zinc or rechargeable batteries)

or old batteries with fresh ones. Always replace bat-

teries as a simultaneous set.

•

If the batteries in the device are depleted or the de-

vice will not be used for a long period of time, re-

move the batteries to prevent damage or injury from

possible battery leakage.

•

Do not try to recharge batteries not intended to be

recharged; they can overheat and rupture (follow bat-

tery manufacturer’s directions).

•

Do not dispose of batteries in fire, batteries may ex-

plode or leak.

•

Clean the battery contacts and also those of the de-

vice prior to battery installation.

•

Remove discharged batteries from the product and

dispose/recycle in compliance with all applicable

laws.

•

Keep batteries away from children and pets. Bat-

teries may be harmful if swallowed. Should a child

or pet swallow a battery, seek medical assistance

immediately.

SAVE THESE INSTRUCTIONS FOR

FUTURE REFERENCE

If the instruction manual is damaged or if you no

longer have the instruction manual in your posses-

sion, please contact customer service at 1-800-

536-0366 or at info@beurer.com.

Dear Customer,

Congratulations on your purchase of this Beurer Blood

Pressure Monitor.

Please read and understand these instructions com-

pletely and carefully before using this product and keep

them for later reference. Be sure to make them access-

ible to other users and observe the information they

contain.

13

2. Indication for use

The upper arm blood pressure monitor is used to carry

out non-invasive measurement and monitoring of the

arterial blood pressure values in adults. This allows you

to quickly and easily measure your blood pressure, save

the measured values and display the development and

average values of the measured values taken.

3. Important Information

Signs and Symbols

The following symbols are used in these instructions

for use, on the packaging and on the type plate for the

device and accessories:

Attention

Note

Note on important informat ion

Observe the instructions for use

Application part, type BF

Direct current

Storage

Permissible storage

temperature and humidity

Operating

Permissible operating

temperature and humidity

Protect from moisture

S

N

Serial number

4. Package Contents

•

1

x BM67 Blood pressure monitor

•

1

x Universal cuff 8.7 - 17.3 in (22 - 44 cm)

•

1

x Storage pouch

•

4

x 1.5V AA alkaline batteries

•

1

x Instruction manual

•

1

x Quick start guide

14

5. Device description

1. Arm Cuff

2. Air Tube

3. Air Tube Connector

4. Start/Stop Button

5. +/- Buttons

6. Blood Pressure Classification Scale

7. Air Tube Socket (on side)

8. LCD Display

9. Memory Button

10. SET Button

Icons in the display:

8

1

10

9

567

2

3

4

11

1. Time and Date

2. Systolic Pressure

3. Diastolic Pressure

4. Pulse Rate

5. Irregular Heartbeat Indicator

6. Battery Level Indicator

7. Memory Space Number/Average ( )/

Morning Reading ( )/Evening Reading ( )

8. Deflation Icon

9. Blood Pressure Classification Indicator

10. User memories

11. Bluetooth

®

transfer indicator

1

2

3

M

SET

Bluetooth

®

mmHg

SYS

mmHg

DIA

/min

PUL

8

7

6

4

10

5

9

15

System requirements for the ‘beurer

HealthCoach‘ app

Bluetooth

®

4.0, iOS from version 8.0, Android

TM

from

version 4.4.

List of compatible devices:

6. Preparing for Measurement

Installing/Replacing Batteries:

If the batteries are depleted and you cannot power the

blood pressure monitor on, you will need to reset the

date, time and Bluetooth

®

settings after replacing the

batteries. All stored measurements will still be saved.

Slide the battery compartment cover in the direction

of its arrow to remove. Insert four AA alkaline batteries

according to the polarity markings inside the compart-

ment. Reattach battery compartment cover.

Setting the hour format, date, time and

Bluetooth

®

settings:

If date and time are not set, stored measurements will

not have a valid timestamp associated with them.

NOTE: Press and hold the +/- Buttons to advance val-

ues rapidly.

1. If ’

12h

’ is not flashing in the LCD Display, press and

hold the SET Button for five seconds.

2.

Select an hour format (12 or 24 hour display) with

the +/- Buttons and press the SET Button to confirm.

3.

The year flashes on the LCD Display. Set the year

with the +/- Buttons and press the SET Button to

confirm.

4.

The month flashes on the LCD Display. Set the

month with the +/- Buttons and press the SET But-

ton to confirm.

5.

The day flashes on the LCD Display. Set the day with

the +/- Buttons and press the SET Button to confirm.

NOTE: If the hour format is set to 24h, the day/

month display sequence is reversed.

16

6. The hour flashes on the LCD Display. Set the hour

with the +/- Buttons and press the SET Button to

confirm.

7. The minutes flash on the LCD Display. Set the min-

utes with the +/- Buttons and press the SET But-

ton to confirm.

8. ’On’ will flash in the LCD Display. Use the +/- But-

tons to select whether to activate (’On’) or deacti-

vate (’Of’) automatic Bluetooth

®

data transfer to a

mobile device. Press the SET Button to confirm and

exit. Note that keeping Bluetooth

®

activated will in-

crease battery drain.

7. Measuring Blood Pressure

The blood pressure monitor needs to be at room

temperature when measuring. Measurements can

be performed on either arm.

Positioning the Cuff:

Place the cuff on to the bare left

upper arm. The circulation of

the arm must not be hindered

by tight clothing or similar.

The cuff must be placed on

the upper arm so that the

bottom edge is positioned

0.8 - 1.2 in (2-3 cm) above

the elbow and over the artery.

The line should point

to the centre of the palm.

Now tighten the free end of

the cuff, but make sure that it

is not too tight around the

arm and close the

hook-and-loop fastener. The

cuff should be fastened so that

two fingers fit under the cuff.

Now insert the cuff line into

the connection for the cuff

connector.

Blood pressure can vary between the right and left

arm, which may mean that the measured blood pres-

sure values are different. Always perform the meas-

urement on the same arm.

17

If the values between the two arms are significantly

different, please consult your doctor to determine

which arm should be used for the measurement.

CAUTION:

Only use original Beurer cuffs with this device. The

included cuff is suitable for an arm circumference of

8.6 – 17.3 inches (22 – 44 cm). For larger arm circum-

ferences, contact customer service to order a lar-

ger cuff.

Correct Posture:

•

Rest for at least five minutes before each meas-

urement.

•

Perform the measurement either sitting or lying

down. Always make sure that the cuff is level with

your heart.

•

To perform a measurement, sit comfortably with

your arms and back supported. Do not cross your

legs and place your feet flat on the floor.

•

Keep still during the measurement and do not talk.

•

R

elax your arm and the palm of your hand.

Select a User Memory

This unit has four user numbers, each with 30 stor-

age slots each.

1. Press the SET Button and select a user memory

from 1 to 4 using the +/- Buttons.

2. Confirm by pressing the Start/Stop Button or just

wait for three seconds to set the user number.

Performing a Measurement

1. With the cuff attached properly and in a correct

posture, press the Start/Stop button . All LCD

Display elements will briefly display and measure

-

ment will begin after about three seconds. To can-

cel a measurement at any time, press the Start/

Stop Button .

18

2. As a measurement concludes, air pressure in the

Cuff will release. The pulse symbol ( ) will dis-

play, along with systolic and diastolic pressure.

The measurement data will be stored into the se-

lected user memory.

3. ’ ’ and a number from 1 to 7 will appear if the

measurement was not performed properly. Refer

to the ’Troubleshooting Guide’ section for details

about specific error message numbers and repeat

the measurement.

4. Press the Start/Stop button to shut off the

blood pressure monitor. The device will also shut

off by itself after about one minute.

5. Wait at least five minutes before taking another

measurement.

Bluetooth

®

data transfer

If the Bluetooth

®

function is activated on the unit,

measurement data is transferred to your paired mo-

bile device after measurement. The blood pressure

monitor will display the Bluetooth

®

symbol ’ ’ during

data transfer. Press the Start/Stop button again

to shut off the blood pressure monitor.

In order to transfer data to the

‘beurer HealthCoach’ app, you

must add the BM67 device to

the app under ’My devices’. The

‘beurer HealthCoach’ app must

be active on your nearby mobile

device to enable data transfer.

19

8. Evaluating Results

Irregular Heartbeat:

This device can detect irregular heartbeat patterns dur-

ing measurement and will indicate them by displaying

the irregular heartbeat indicator .

This may be an indicator for arrhythmia, which is a

condition where the heart rhythm is abnormal. These

symptoms (omitted or premature heartbeats, slow or

excessively fast heart rate) may be caused, among

other things, by heart disease, age, physical predis-

position, excessive use of stimulants, stress, or lack

of sleep. Arrhythmia can only be ascertained through

examination by your doctor.

Repeat the measurement if the Irregular Heartbeat Indi-

cator displays after a measurement. Rest for at least

five minutes between measurements and do not talk

or move during measurement. If the icon appears

often, contact your doctor, since self-diagnosis and

treatment based solely on the test results may be dan-

gerous. It is vital to follow your doctor‘s instructions

Blood Pressure Classifications

Measurements can be classified and assessed by the

table below. However, these standard values are only

a general guideline, since individual blood pressure

varies in different people and different age groups, etc.

Blood pres-

sure value

Beurer BM 67 Le manuel du propriétaire

Beurer BM 67 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents