Amprobe Commercial / Residential Multimeter Manuel utilisateur

AM-510

Commercial /

Residential

Multimeter

User Manual

ENG FRE

SPA

English

AM-510

Commercial / Residential

Multimeter

User Manual

1/2018, Rev.2

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship for one year from

the date of purchase unless local laws require otherwise. This warranty does not cover fuses,

disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to extend any other

warranty on the behalf of Amprobe. To obtain service during the warranty period, return the

product with proof of purchase to an authorized Amprobe Service Center or to an Amprobe

dealer or distributor. See Repair Section for details. THIS WARRANTY IS YOUR ONLY REMEDY.

ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR STATUTORY - INCLUDING IMPLIED

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY

DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL

OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since

some states or countries do not allow the exclusion or limitation of an implied warranty or of

incidental or consequential damages, this limitation of liability may not apply to you.

Repair

All Amprobe returned for warranty or non-warranty repair or for calibration should be

accompanied by the following: your name, company’s name, address, telephone number, and

proof of purchase. Additionally, please include a brief description of the problem or the service

requested and include the test leads with the meter. Non-warranty repair or replacement charges

should be remitted in the form of a check, a money order, credit card with expiration date, or a

purchase order made payable to Amprobe.

In-warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair. During the

warranty period, any defective test tool can be returned to your Amprobe distributor for an exchange

for the same or like product. Please check the “Where to Buy” section on amprobe.com for a list

of distributors near you. Additionally, in the United States and Canada, in-warranty repair and

replacement units can also be sent to an Amprobe Service Center (see address below).

Non-warranty Repairs and Replacement – United States and Canada

Non-warranty repairs in the United States and Canada should be sent to an Amprobe Service

Center. Call Amprobe or inquire at your point of purchase for current repair and replacement rates.

USA Canada

Amprobe Amprobe

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Beha-Amprobe distributor for a nominal charge.

Please check the “Where to Buy” section on beha-amprobe.com for a list of distributors near you.

Beha-Amprobe

Division and reg. trademark of Fluke Corp. (USA)

Germany* United Kingdom The Netherlands - Headquarters**

In den Engematten 14 52 Hurricane Way Science Park Eindhoven 5110

79286 Glottertal Norwich, Norfolk 5692 EC Son

Germany NR6 6JB United Kingdom The Netherlands

Phone: +49 (0) 7684 8009 - 0 Phone: +44 (0) 1603 25 6662 Phone: +31 (0) 40 267 51 00

beha-amprobe.de beha-amprobe.com beha-amprobe.com

*(Correspondence only – no repair or replacement available from this address. European customers please

contact your distributor.)

**single contact address in EEA Fluke Europe BV

AM-510 Commercial / Residential Multimeter

1

Flash light

2

LCD Display

3

Function Buttons

4

Flash light Button

5

Rotary Switch

6

SELECT Button

7

Input Terminal for voltage, frequency, diode,

capacitance, resistance and continuity measurement

8

COM (return) terminal for all measurements

9

Input Terminal for battery test and AC/DC mA or μA

measurement

10

Input Terminal for AC/DC A measurement to10A

1

2

7

8

3

4

5

9

10

6

Screen Display

1

The Meter selects the range with best resolution

2

Negative reading

3

Alternate Current

4

Low battery indicator

5

Data hold

6

Diode test

7

Continuity test

8

Relative zero mode

9

Non-Contact Voltage

10

Measurement units

11

Duty Cycle

12

Measurement unit for voltage

13

Battery Test

1

2

76 8 9

3

4

5

10

11

12

13

1

AM-510 Commercial / Residential Multimeter

CONTENTS

SYMBOLS ...............................................................................................................2

SAFETY INFORMATION .........................................................................................2

UNPACKING AND INSPECTION .............................................................................3

FEATURES ...............................................................................................................4

MAKING MEASUREMENT .....................................................................................5

Measuring AC and DC Voltage .........................................................................6

Measuring AC and DC Current .........................................................................7

Measuring Resistance .......................................................................................8

Measuring Continuity .......................................................................................9

Measuring Diode ...............................................................................................9

Measuring Capacitance ....................................................................................10

Measuring Frequency .......................................................................................10

Non-Contact Voltage Sensing ..........................................................................11

Battery Test ........................................................................................................12

SPECIFICATION .......................................................................................................12

MAINTENANCE AND REPAIR ................................................................................17

BATTERY AND FUSE REPLACEMENT .....................................................................18

2

SYMBOLS



Caution! Risk of electric shock.



Caution! Refer to the explanation in this Manual



Alternating Current (AC)



Direct Current (DC)



The equipment is protected by double insulation or reinforced

insulation



Earth (Ground)

Audible tone

Battery



Complies with European Directives

Conforms to relevant Australian standards



Canadian Standards Association (NRTL/C)



Do not dispose of this product as unsorted municipal waste. Contact

a qualified recycler.

SAFETY INFORMATION

The Meter complies with:

IEC/EN 61010-1 3rd Edition, UL61010-1 2nd Ed. and CAN/CSA C22.2 No.

61010.1-0.92 to Category III 600 Volts, Pollution degree 2

IEC/EN 61010-2-030

IEC/EN 61010-2-31 for test leads

EMC IEC/EN 61326-1

Measurement Category III (CAT III) is for measurements performed in the

building installation. Examples are measurements on distribution boards,

circuit- breakers, wiring, including cables, bus-bars, junction boxes, switches,

socket-outlets in the fixed installation, and equipment for industrial use

and some other equipment, for example, stationary motors with permanent

connection to the fixed installation.

3

CENELEC Directives

The instruments conform to CENELEC Low-voltage directive 2014/35/EC and

Electromagnetic compatibility directive 2014/30/EC

Warning: Read Before Using

• To avoid possible electrical shock or personal injury, follow these

instructions and use the Meter only as specified in this manual.

• Do not use the Meter or test leads if they appear damaged, or if the

Meter is not operating properly. If in doubt, have the Meter serviced.

• Always use the proper function and range for measurements.

• Before rotating the function range selection switch, disconnect test

probe from circuit under test.

• Verify the Meter’s operation by measuring on a known voltage source.

• Do not apply more than the rated voltage, as marked on the Meter,

between the test probe or between any test probe and earth ground.

• Use the Meter with caution for voltages above 30 Vac rms, 42 Vac peak,

or 60 Vdc. These voltages pose electrical shock hazards.

• Disconnect circuit power and discharge all high-voltage capacitors before

testing resistance.

• Do not use the Meter around explosive gas or vapor.

• When using the test leads, keep your fingers behind the finger guards.

• Remove test leads from the Meter before opening the Meter case or

battery door.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 AM-510 Multimeter

1 Pair of test leads

1 9V (6F22) battery (installed)

1 Users manual

If any of the items are damaged or missing, return the complete package to

the place of purchase for an exchange.

4

FEATURES

The digital multimeter designed for advanced residential applications. Rewire

an electrical panel, install heated floors or new light fixtures, troubleshoot and

repair home appliances, electrical sockets and automotive electrical problems

with this easy-to-use multimeter. The AM-510 features a built-in flashlight

to see wires in the dark, a kick stand, and probe holder to give you the

“third-hand” you need while taking measurements and non-contact voltage

detection for quick go-no-go checks without the need for an additional tool.

Compact yet tough, this multimeter is built to last through all your electrical

projects.

• Measurements: Voltage up to 600V AC/DC, AC/DC Current and Resistance

• Frequency, Capacitance, Duty Cycle for troubleshooting applications

• Special Functions:

- Non-contact Voltage Detection

- Audible continuity

- Diode Test

• Backlit LCD display

• Events:

- Data hold

- Relative zero mode

• Built in work light (flashlight)

• Built in test leads storage and “third hand” probe holder

• Auto and Manual ranging

• Auto power off

• Low battery warning

• Safety: CAT III 600V

5

MAKING MEASUREMENT



1. Use the proper function and range for measurements.

2. To avoid possible electrical shock, personal injury or damages to the

Meter, disconnect circuit power and discharge all high-voltage capacitors

before testing resistance and diode.

3. Connecting test leads:

• Connect the common (COM) test lead to the circuit before connecting

the live lead;

• After measurement, remove live lead before removing the common

(COM) test lead from the circuit

4. Symbol “OL” is displayed on LCD when the measurement is out of range.

Rotary Switch Positions

Switch Position Measurement Function

V

AC or DC voltage measurement (use SELECT button for

switching to AC or DC).



Resistance measurement



Voltage measurement of diode PN junction

Continuity measurement



Capacitance measurement

Hz Frequency measurement

% Duty cycle

NCV Non-contact voltage

9V For measurement of dry batteries of not exceeding 15Vdc

1.5V For measurement of dry batteries of not exceeding 2Vdc

μA

mA A

AC or DC current measurement (use SELECT button for

switching to AC or DC).

Rotary Switch Positions

Button Measurement Function

SELECT

Press the yellow SELECT button to select alternate

measurement functions on the rotary switch.

6

HOLD /

Display freezes present reading / press 2 sec to turn on

LCD backlight.

REL

Relative zero mode

RANGE

Manual or Auto range switching. The default setting

is Auto ranging, press to switch to manual ranging

(selectable resolutions). Press for 2 sec to return to auto

ranging.

Hz / %

Frequency / Duty Cycle. Press to turn on Frequency

measurement mode; press again for duty cycle

measurement.

Flash light

Press

to enable the function when at relevant rotary switch function.

Auto Power OFF

Auto power off: approx. 30 minutes.

When the Meter is in auto power off mode, press any button to resume

normal operation.

Measuring AC and DC Voltage

To avoid personal injury or damage to the Meter, do not apply voltage

higher than 600V.

Auto Range

/Manual Range

7

Measuring AC and DC Current

Press SELECT button to select AC or DC current measurement function.

To avoid personal injury or damage to the Meter:

1. Do not attempt to make an in-circuit current measurement when the

open-circuit potential to earth ground exceeding 600V.

2. Switch to proper function and range for your measurement.

3. Do not place the test probe in parallel with a circuit when the test leads

are connected to the current terminals.

4. Connect the test leads to the correct input A/mA μA current terminal and

to the circuit before powering the circuit under test.

5. For current range from 8-10A, do not measure current for more than 20

minutes. Wait for 10 minutes before taking another measurement

6. After measurement, switching OFF the circuit’s power before removing

test leads from the circuit.

Auto Range

/Manual Range

AC/DC

RL

8

Auto Range

/Manual Range

AC/DC

RL

Measuring Resistance

Disconnect circuit power and discharge all high-voltage capacitors

before testing resistance.

R

Note:

On a higher resistance measurement (>1M), the measurement may take a

few seconds to get stable reading.

Over range or open circuit indication: OL

9

Measuring Continuity

Disconnect circuit power and discharge all high-voltage capacitors

before testing continuity.

R 1 0

R 150

Measuring Diode

Disconnect circuit power and discharge all high-voltage capacitors

before testing diode.

D

10

Measuring Capacitance

Disconnect circuit power and discharge all high-voltage capacitors

before testing capacitance.

C

Auto Range

Measuring Frequency

Press Hz/% button to select Frequency / Duty Cycle measurement function.

To avoid personal injury or damage to the Meter, do not apply voltage

higher than 600V.

Auto Range

11

Non-Contact Voltage Sensing



1. To avoid personal injury or damage to the Meter, do not test on

un-insulated high voltage wires.

2. Buzzer will sound when detecting voltage higher than AC 90V. Screen

displays“OL”.

3. Do not test on hazardous live wires higher than AC 600V.

12

Battery Test

Applying a voltage source or incorrect battery type under battery test

may cause personal injury or damage to the Meter.

Battery 1.5V range is for dry battery not exceeding 2Vdc. The resistance load

is around 30Ω.

Battery 9V range is for dry battery not exceeding 15Vdc. The resistance load

is around 1KΩ.

SPECIFICATION

Ambient temperature: 23°C ±5°C (73.4°F ±9°F)

Relative temperature: ≤75%

Accuracy: ±(% of reading + digits)

Maximum voltage between input terminal and earth ground: AC 600Vrms or

DC 600V

Fuse for mA μA input: 0.5A H 660V fast-fuse, 6.3×32mm.

Fuse for 10A input: 10A H 660V fast-fuse, 6.3×32mm.

Maximum display: Digital 3999 counts, updates 3/sec. Frequency: 4999 counts.

Over-range indication: OL

Range: Automatic

Altitude: Operating ≤ 2000m

Operating temperature: 0°C ~ +40°C (32°F ~ 104°F)

13

Relative humidity: 0°C ~ +30°C (32°F ~ 86°F) ≤75%; +30°C ~ +40°C (86°F ~

104°F) ≤50%

Storage temperature: -10°C ~ +50°C (14°F ~ 122°F)

Electromagnetic compatibility: In an RF filed of 1V/m = Specified accuracy ±5%

Battery: 9V, 6F22, NEDA1604 or equivalent

Low battery indication:

Dimensions (L x W x H): 182 mm x 90 mm x 45 mm (7.2 in x 3.5 in x 1.8 in)

Weight: Approx. 354g (0.78lb) with batteries installed

1. DC Voltage Measurement

Range Resolution Accuracy

4.000V 1mV

±(0.8%+1dgt)40.00V 10mV

400.0V 100mV

600V 1V ±(1.0%+3dgt)

Input impedance: around 10MΩ; (Input impedance > 3GΩ for DC 400mV

range)

Overload protection: ±600V

2. AC Voltage Measurement

Range Resolution Accuracy

400.0mV 0.1mV ±(1.2%+3dgt)

4.000V 1mV

±(1.0%+3dgt)40.00V 10mV

400.0V 100mV

600V 1V ±(1.2%+3dgt)

Note: 400.0mV range is available for manual range only.

Input impedance: around 10MΩ

Frequency response: 45Hz ~ 400Hz

Average sensing, rms indication.

Overload protection: 600Vrms

14

3. Resistance Measurement

Range Resolution Accuracy

400.0Ω 0.1Ω ±(1.2%+2dgt)

4.000kΩ 1Ω

±(1.0%+2dgt)40.00kΩ 10Ω

400.0kΩ 100Ω

4.000MΩ 1kΩ ±(1.2%+2dgt)

40.00MΩ 10kΩ ±(1.5%+5dgt)

400

Ω range: Measured value = (Measured display value) – (Short-circuiting

value of probe)

Open circuit voltage: around 0.5V

Overload protection: 600Vrms

4. : Continuity : Diode measurement

Range Resolution Accuracy

0.1Ω

Open circuit voltage is around 0.5V.

Resistance >150Ω, buzzer will not sound.

Resistance ≤10Ω, buzzer will sound.



1mV

Open-circuit voltage is around 1.5V. Normal voltage is

around 0.5V to 0.8V for silicon PN junction.

Overload protection: 600Vrms

5. Capacitance Measurement

Range Resolution Accuracy

40.00nF 10pF ±(3%+10dgt) under REL status

400.0nF 100pF

±(3%+5dgt) under REL status

4.000uF 1nF

40.00uF 10nF ±(3%+5dgt)

100.0uF 100nF ±(4%+5dgt)

Overload protection: 600Vrms

La page est en cours de chargement...

Amprobe Commercial / Residential Multimeter Manuel utilisateur

Ce manuel convient également à

Amprobe Commercial / Residential Multimeter Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents