red lion NT328G Hardware Manuel utilisateur

Marque: red lion

Modèle: NT328G Hardware

Catégorie: Commutateurs réseau

Taper: Manuel utilisateur

Hardware Guide | October 2020

LP1108 | Revision C

NT328G Industrial Ethernet

Managed Switch Series

registered trademarks of Red Lion Controls, Inc. All other company and product names are

trademarks of their respective owners.

Red Lion Controls, Inc.

20 Willow Springs Circle

York, PA 17406

CONTACT INFORMATION:

AMERICAS

Inside US: +1 (877) 432-9908

Outside US: +1 (717) 767-6511

Hours: 8 am-6 pm Eastern Standard Time

(UTC/GMT -5 hours)

ASIA-PACIFIC

Shanghai, P.R. China: +86 21-6113-3688 x767

Hours: 9 am-6 pm China Standard Time

(UTC/GMT +8 hours)

EUROPE

Netherlands: +31 33-4723-225

France: +33 (0) 1 84 88 75 25

Germany: +49 (0) 1 89 5795-9421

UK: +44 (0) 20 3868 0909

Hours: 9 am-5 pm Central European Time

(UTC/GMT +1 hour)

Website: www.redlion.net

Support: support.redlion.net

Drawing No. LP1108 Table of Contents

Revision C

NT328G Industrial Ethernet

Managed Switch Series

Table of Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Disclaimer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Purpose

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Audience

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Prerequisite Knowledge

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Compliance Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

FCC Statement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Déclaration de conformité FCC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Industry Canada

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Instructions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Document Conventions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Regulatory Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Access to Hardware Interface

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Trademark Acknowledgments

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Document History and Related Publications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Related Documents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Additional Product Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 1 Introduction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Features and Benefits

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

DIMENSIONS In inches (mm)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Model Layouts - Front

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

NT328G-20SFP

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

NT328G-04SFP

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Model Layouts - Rear

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1 AC Power Models

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 AC Power Models

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Technical Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

NT328G-04SFP Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

NT328G-20SFP Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Transceiver Characteristics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

100Base SFP Fiber Transceiver Characteristics (NT328G-20SFP Model Only)

. 12

Gigabit SFP Fiber Transceiver Characteristics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

10 Gigabit SFP+ Fiber Transceiver Characteristics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2 Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Contents of Package

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Rack Mounting the Switch

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting to Earth Ground

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Alarm Relay Connecting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Power Connections

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Table of Contents Drawing No. LP1108

Revision C

NT328G Industrial Ethernet

Managed Switch Series

Terminal Block Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting to the Ethernet Port (RJ45 Ethernet)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting to the Ethernet Port (Fiber, SFP/SFP+)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

LED Status Indications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Console Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connect & Login to the Switch

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

CLI Initialization & Configuration (Optional)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

CLI Command

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Web Interface Initialization (Optional)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Web Browser Support

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

System Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Ordering Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Service and Support Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Service Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

For Your Convenience:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Product Support

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

LIMITED WARRANTY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Drawing No. LP1108 Preface

Revision C Disclaimer

NT328G Industrial Ethernet

Managed Switch Series

Preface

Disclaimer

While every effort has been made to ensure that this document is complete and accurate at the time of release, the

information that it contains is subject to change. Red Lion Controls, Inc. is not responsible for any additions to or alterations

of the original document. Industrial networks vary widely in their configurations, topologies, and traffic conditions. This

document is intended as a general guide only. It has not been tested for all possible applications, and it may not be complete

or accurate for some situations.

Users of this document are urged to heed warnings and cautions used throughout the document.

Purpose

This guide provides an overview of the NT328G Rackmount Layer 3 Switch as implemented in the current version of

software. These commands are used to set-up and execute applications on the device.

Audience

This guide is intended for use by network administrators, system engineers or other operating personnel who are

responsible for operating and maintaining networking equipment; consequently, it assumes a basic working knowledge of

general switch functions.

Prerequisite Knowledge

The reader must be familiar with the:

z Basic operations of the switch

z Security and activity monitoring constraints that limit how a command is implemented

Compliance Information

FCC Statement

This product complies with Part 15 of the FCC-A Rules.

Operation is subject to the following conditions:

1. This device may not cause harmful Interference

2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. Operation of this device in a

residential area is likely to cause harmful interference in which case the user will be required to correct the interference at

his/her own expense.

Déclaration de conformité FCC

Preface Drawing No. LP1108

Safety Instructions Revision C

NT328G Industrial Ethernet

Managed Switch Series

Ce produit est conforme à la partie 15 des règles de la FCC –A

Utilisation est soumise aux conditions suivantes:

1. Ce dispositif ne doit pas causer des interférences nuisibles

2. Cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un mauvais

fonctionnement.

Note: Cet équipement a été testé et jugé conforme aux limites de la classe A des appareils numériques , conformément

à la partie 15 des règles de la FCC . Ces limites sont conçues pour fournir une protection raisonnable contre les interférences

nuisibles dans une installation résidentielle . Cet équipement génère, utilise et peut émettre de l’énergie radiofréquence et,

si il n’est pas installé et utilize conformément aux instructions, peut causer des interférences nuisibles aux communications

radio. L’utilisation de cet appareil dans une zone résidentielle est susceptible de provoquer des interférences nuisibles,

auquel cas l’utilisateur sera tenu de corriger les interférences à ses propres frais .

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.

Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation.

Cet appareillage numérique de la classe A répond à toutes les exigences de l’interférence canadienne causant des

règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer

l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui peut

causer l’opération peu désirée.

Safety Instructions

When a connector is removed during installation, testing, or servicing, or when an energized fiber is broken, a risk of

ocular exposure to optical energy that may be potentially hazardous occurs, depending on the laser output power.

Lorsqu’un connecteur est retiré pendant l’installation, le test ou l’entretien, ou lorsqu’une fibre sous tension est brisée,

un risque d’exposition oculaire à une énergie optique potentiellement dangereuse se produit, selon la puissance de sortie

du laser.

DANGER: Class 1 Laser Product. Do not stare into the laser.

AVERTISSEMENT: Produit Laser Lasse 1. Ne regardez pas dans le laser.

The primary hazards of exposure to laser radiation from an optical-fiber communication system are:

z Damage to the eye by accidental exposure to a beam emitted by a laser source.

z Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber.

Les principaux dangers de l’exposition au rayonnement laser provenant d’un système de communication à fibres optiques

sont:

z Dommage à l’oeil par exposition accidentelle à un faisceau émis par une source laser.

z Dommage pour les yeux dû au fait de voir un connecteur relié à une fibre cassée ou à une fibre sous tension.

Drawing No. LP1108 Preface

Revision C Document Conventions

NT328G Industrial Ethernet

Managed Switch Series

The equipment has hot surfaces.

DANGER: Hot Surface.

During operation, take care to avoid coming into contact with a

hot surface. Do not touch it over 1 second.

AVERTISSEMENT: Surface chaude!

Pendant l’opération, en prenant soin d’éviter d’entrer en contact

avec une surface chaude. Ne le touchez pas plus d’une seconde.

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired. Changes or modifications to the equipment, which are not approved by the party responsible for compliance,

could affect the user’s authority to operate the equipment.

Si l’équipement est utilisé d’une manière non spécifiée par le fabricant, la protection fournie par l’équipement peut être

compromise. Les changements ou modifications apportés à l’équipement, qui ne sont pas approuvés par la partie

responsable de la conformité, pourraient affecter le pouvoir de l’utilisateur d’utiliser l’équipement.

Document Conventions

The following conventions are used in this manual to emphasize information that will be of interest to the reader.

Danger

DANGER: The described activity or situation might or will cause

personal injury.

AVERTISSEMENT: L’activité ou la situation décrite pourrait ou

causera des blessures corporelles.

Warning

WARNING: The described activity or situation might or will

cause equipment damage.

AVERTISSEMENT: L’activité ou la situation décrite peut ou

causera des dommages matériels.

Caution

CAUTION: The described activity or situation might or will cause

service interruption or degradation.

AVERTISSEMENT: L’activité ou la situation décrite peut ou

causera une interruption ou une dégradation du service.

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

Preface Drawing No. LP1108

Regulatory Information Revision C

NT328G Industrial Ethernet

Managed Switch Series

Regulatory Information

Product Safety

UL 61010 Ordinary Locations

ANSI/ISA-12.12.01, Class I and II, Division 2 and Class III, Divisions

1 and 2 Groups A, B, C and D Hazardous Locations

C22.2 No. 61010 Ordinary Locations

C22.2 No. 213 Class I, Division 2 Hazardous Locations

EMI/EMC

CFR 47, Part 15, Subpart B

Innovation, Science and Economic Development Canada ICES-003

Issue 6

ANSI C63.4:2014

EN 61000-6-2 Generic standards - Immunity standard for industrial

environments

EN 61000-6-4 Generic standards - Emission standard for industrial

environments

IEC 61000-4-2 (ESD)

IEC 61000-4-3 (Radio-Frequency Electromagnetic Field)

IEC 61000-4-4 (Fast Transient)

IEC 61000-4-5 (Surge)

IEC 61000-4-6 (Radio-Frequency Continuous Conducted)

IEC 61000-4-8 (Power Frequency Magnetic Field)

IEC 61000-4-11 (Voltage Dips, Short Interruptions)

IEC 61000-4-16 (Mains Frequency Voltage)

IEC 61000-4-18 (Damped Oscillatory Wave)

Shock & Vibration

IEC 60068-2-6: 2 g @ 5-500 Hz 2 g Tri-Axle

IEC 60068-2-27: 50 g @ 11 ms Tri-Axle

IEC 60068-2-32: Test Ed: Free Fall

Rail

EN 50155, EN 50121 and EN 61373

Other

RoHS compliant

Drawing No. LP1108 Preface

Revision C Access to Hardware Interface

NT328G Industrial Ethernet

Managed Switch Series

Access to Hardware Interface

Access to the hardware interface is by a terminal (or computer with terminal emulation software).

Requirements for the terminal are:

z RS-232 ASCII port

z Selectable transmission baud rate

z Full alphanumeric capability

z Selectable odd/even or no parity check

Trademark Acknowledgments

Red Lion Controls acknowledges and recognizes ownership of the following trademarked terms used in this document.

z Ethernet is a registered trademark of Xerox Corporation.

All other company and product names are trademarks of their respective owners.

Document History and Related Publications

The hard copy and electronic media versions of this document are revised only at major releases and therefore, may not

always contain the latest product information. Tech Notes and/or product addendums will be provided as needed between

major releases to describe any new information or document changes.

The latest online version of this document can be accessed through the Red Lion website at

www.redlion.net/support/documentation.

Related Documents

Available documents related to this product can be accessed at www.redlion.net/support/documentation.

z LP1105 - NT328G Industrial Ethernet Managed Switch Software Guide

Additional Product Information

Additional product information can be obtained by contacting the local sales representative or Red Lion through the

contact numbers listed on the inside of the front cover.

Preface Drawing No. LP1108

Document History and Related Publications Revision C

NT328G Industrial Ethernet

Managed Switch Series

Drawing No. LP1108 Chapter 1 Introduction

Revision C Overview

NT328G Industrial Ethernet

Managed Switch Series

Chapter 1 Introduction

Overview

The Red Lion

NT328G, Layer 3 rackmount industrial Ethernet switch, offers 28 high speed ports (24 Gigabit, 4 10

Gigabit) to meet the performance requirements of bandwidth intensive applications. Designed to meet current and future

needs with reliable wire-speed switching performance and a flexible mix of copper and fiber ports, the NT328G’s robust

feature set includes network redundancy, advanced security, policy-based traffic control and easy-to-use configuration and

management. Housed in a rugged IP30 metal enclosure, the switch is designed for long-life use in harsh industrial

environments, including wide operating temperature conditions and hazardous locations.

Features and Benefits

PRODUCT HIGHLIGHTS

• 24 Gigabit Copper Ports or 8 Gigabit Copper Ports and 16

Gigabit SFP Ports

• 4 10G SFP+ Ports

Supports 10G SFP+ Fiber or 1G Copper/ Fiber SFP Transceivers

MANAGEMENT

• RMON (Monitors L1 to L2 Traffic)

• Configuration Backup/Restore

• DHCP Server/Client/Relay Agent with Option 61, Option 82

• IGMP v1, v2, v3

• SNMP v1, v2, v3

• Port Mirroring

• Event Log/Syslog

• Advanced VLAN Operations

• LLDP

• Web Browser Management

• CLI: Console, Telnet, SSH

NETWORK REDUNDANCY

• High-Speed Ring Protocol with <20ms Heal Time

• Chain Protocols

• LACP (Port Trunking)

• Up to 14 Trunks per Switch

• Up to 8 Ports per Trunk

• IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s, 802.1Q

MSTP

QoS/RATE LIMITING/TRAFFIC CONTROL

• QoS: Traffic Policing, Traffic Shaping, Queue Scheduling

Policy/Profile-based Access Control List:

• IP/MAC/TCP/UDP/ToS/DSCP

• CoS/DSCP: SPQ, WRR, SPQ+WRR

• Rate Limiting / Traffic Control: Storm Control

• Multicast/Unicast Filtering

ROUTING

• GVRP

• IEEE 802.1 AD (QinQ)

• VRRP v2, v3

• RIP v1, v2

• OSPF

• Static Routing

• L3 Forwarding

SECURITY

• SNMP v3

• SSH, SSL, HTTPS

• Access Control List

• 802.1X port authentication

• 802.1X user login authentication

• IP Source Guard (DHCP)

LISTED

IND.CONT. EQ.

5LS7/5MP5

compliant

EN50155

Chapter 1 Introduction Drawing No. LP1108

DIMENSIONS In inches (mm) Revision C

NT328G Industrial Ethernet

Managed Switch Series

DIMENSIONS In inches (mm)

17.31

(439.60)

1.25

(31.75)

1.73

(44.00)

18.15

(461.00)

18.46

(469.00)

18.98

(482.00)

11.81

(300.00)

12.41

(315.30)

17.31

(439.60)

12.33

(313.30)

Number of power inputs is model

dependent. See Model Layouts - Rear

for more informaon.

Port congurations are model dependent. See Model Layouts - Front for more information.

Drawing No. LP1108 Chapter 1 Introduction

Revision C Model Layouts - Front

NT328G Industrial Ethernet

Managed Switch Series

Model Layouts - Front

NT328G-20SFP

8 10/100/1000Base T(X) Ports, 16 100/1000Base SFP Ports and 4 10G SFP+ Ports

NT328G-04SFP

24 10/100/1000Base T(X) Ports and 4 10G SFP+ Ports

Model Layouts - Rear

1 AC Power Models

2 AC Power Models

8 10/100/1000Base T(X) Ports

4 10G SFP+ Fiber Ports*

*Backwards compable to 1G copper and ﬁber SFP tranceivers.

16 100/1000Base SFP Ports

4 10G SFP+ Fiber Ports*

*Backwards compable to 1G copper and ﬁber SFP tranceivers.

24 10/100/1000Base T(X) Ports

USB Port

Terminal block for

Alarm Relay output

Grounding screw

PWR1: AC Power Input

USB Port

Terminal block for

Alarm Relay output

Grounding screw

PWR1: AC Power Input

PWR2: AC Power Input

Chapter 1 Introduction Drawing No. LP1108

Technical Specifications Revision C

NT328G Industrial Ethernet

Managed Switch Series

Technical Specifications

ETHERNET

Ethernet

Interface

100/1000Base SFP slots or 10/100/1000BaseT(X) for 24 gigabit ports

10G SFP+ (1G SFP backward compatible) for 4 SFP+ slots

POWER

Power Input

Options

Input Voltage

Range

Maximum Power Consumption

Single/Dual

AC inputs

100-240 VAC,

50 Hz - 60 Hz

35 W

ENVIRONMENTAL AND COMPLIANCES

Operating

Temperature

Range

Storage

Temperature Range

Humidity

(non-condensing)

Operating Altitude Operating Condition

-40 to 75 °C -40 to 85 °C 5 to 95% RH Up to 10,000 ft OVC II and PD 2

MECHANICAL

Ingress

Protection

Height Width Depth Weight Installation Option

IP30 1.73" (44.00 mm) 17.31" (439.60 mm) 12.41" (315.30 mm) 7.19 lbs. (3.26 kg) (maximum,

NT328G-20SFP-AC2)

19" rack mounting

RECOMMENDED MINIMUM WIRING CLEARANCE

Back 2.00" (50.80 mm)

Front 4.00" (101.60 mm)

NT328G-04SFP Specifications

NT328G-04SFP-AC1 SPECIFICATIONS NT328G-04SFP-AC2 SPECIFICATIONS

Weight: 6.28 lbs. (2.85 kg) Weight: 6.75 lbs. (3.06 kg)

Input Voltage: 100-240 VAC Input Voltage: 100-240 VAC

Steady Input Current: 470 mA @ 120 VAC Steady Input Current: 470 mA @ 120 VAC

BTU/hr: 192 @ 120VAC BTU/hr: 192 @ 120 VAC

NETWORK AND MEDIA SPECIFICATIONS CONNECTOR SPECIFICATIONS

10BaseT: ≥Cat3 Cable 10/100/1000BaseT(X): Twenty-four (24) RJ45 TX Copper Ports

100BaseTX: ≥Cat5 Cable 1000 BaseT SFP Port: Up to four (4) RJ45 SFP Copper

Transceiver Ports

1000BaseT: ≥Cat5e Cable 1000 BaseSX/LX SFP

Port:

Up to four (4) LC SFP Fiber Transceiver

Ports

1000BaseSX Multimode: 50-62.5/125μm 10G BaseSR/LR SFP

Port:

Up to four (4) LC SFP Fiber Transceiver

Ports

1000BaseLX Singlemode: 7-10/125μm

10GBaseSR Multimode: 50/125μm

10GBaseLR Singlemode: 9/125μm

Drawing No. LP1108 Chapter 1 Introduction

Revision C NT328G-20SFP Specifications

NT328G Industrial Ethernet

Managed Switch Series

NT328G-20SFP Specifications

NT328G-20SFP-AC1 SPECIFICATIONS NT328G-20SFP-AC2 SPECIFICATIONS

Weight: 6.72 lbs. (3.05 kg) Weight: 7.19 lbs. (3.26 kg)

Input Voltage: 100-240 VAC Input Voltage: 100-240 VAC

Steady Input Current: 500 mA @ 120 VAC Steady Input Current: 500 mA @ 120 VAC

BTU/hr: 205 @ 120 VAC BTU/hr: 205 @ 120 VAC

NETWORK MEDIA SPECIFICATIONS CONNECTOR SPECIFICATIONS

10BaseT: ≥Cat3 Cable 10/100/

1000BaseT(X):

Eight (8) RJ45 TX Copper Ports

100BaseTX: ≥Cat5 Cable 100BaseFX SFP Port: Up to sixteen (16) LC SFP Fiber

Transceiver Ports

1000BaseT: ≥Cat5e Cable 1000BaseT SFP Port: Up to twenty (20) RJ45 SFP Copper

Transceiver Ports

100BaseFX, 1000BaseSX

Multimode:

50-62.5/125μm 1000BaseSX/LX SFP

Port:

Up to twenty (20) SFP Fiber Transceiver

Ports

100BaseFXE,

1000BaseLX Singlemode:

7-10/125μm 10GBaseSR/LR SFP

Port:

Up to four (4) LC SFP Fiber Transceiver

Ports

10GBaseSR Multimode: 50/125μm

10GBaseLR Singlemode: 9/125μm

Chapter 1 Introduction Drawing No. LP1108

Transceiver Characteristics Revision C

NT328G Industrial Ethernet

Managed Switch Series

Transceiver Characteristics

100Base SFP Fiber Transceiver Characteristics (NT328G-20SFP Model Only)

Fiber Mode MM SM SM SM

Fiber Length* 2 km 15 km 40 km 80 km

TX Power Min. -19 dBm -15 dBm -5 dBm -5 dBm

RX Sensitivity Max. -31 dBm -34 dBm -34 dBm -34 dBm

Wavelength 1310 nm 1310 nm 1310 nm 1550 nm

Laser Type FP FP FP DFB

Gigabit SFP Fiber Transceiver Characteristics

Fiber Mode MM SM SM SM

Fiber Length* 550m @ 50/125 μm

275m @ 62.5/125 μm

10 km 40 km 80 km

TX Power Min -9.5 dBm -9.5 dBm -2 dBm 0 dBm

RX Sensitivity Max -17 dBm -20 dBm -22 dBm -24 dBm

Wavelength 850 nm 1310 nm 1310 nm 1550 nm

Laser Type VCSEL FP DFB DFB

10 Gigabit SFP+ Fiber Transceiver Characteristics

Fiber Mode MM SM SM SM

Fiber Length* 300 m 10 km 40 km 80 km

TX Power Min -7.3 dBm -8.2 dBm -4.7 dBm -1.0 dBm

RX Sensitivity Max -11.1 dBm -12.6 dBm -15.8 dBm -23 dBm

Wavelength 850 nm 1310 nm 1550 nm 1550 nm

Laser Type VCSEL DFB EML EML

* Fiber Length distances represent typical performance. Link budgets should be evaluated based on specific application conditions.

** SFP transceivers sold separately.

Drawing No. LP1108 Chapter 2 Installation

Revision C Contents of Package

NT328G Industrial Ethernet

Managed Switch Series

Chapter 2 Installation

Contents of Package

Carefully remove the switch and accessories from the shipping container and inspect them for damage. Contact Red Lion

immediately if any damage is discovered.

Please verify that the box contains the following items:

- (1) Rack-mount Ethernet switch

- (2) Rack-mount brackets

- (4) Screws for brackets

- (1) Console cable

- (1) ALM terminal block (2-pin)

- (1) Documentation CD

- (12) RJ45 and (2) SFP dust covers (NT328G-04SFP)

- (4) RJ45 and (10) SFP dust covers (NT328G-20SFP)

Rack Mounting the Switch

When mounting the switch, practice good safety habits. Relay rack mounting normally requires at least two people.

1. Obtain the tools required for mounting the hardware.

2. Attach the mounting brackets to the switch by using

the screws in the accessory kit.

3. Secure the switch in its relay location on both the left

and right sides of the mounting bracket. Tighten screws

with 4.3-5.2 inch-lbs.

Note: The industrial control panel rated ambient

temperature required is 75 °C min.

Note: La température ambiante nominale du panneau

de commande industriel requis était de 75 °C min.

Chapter 2 Installation Drawing No. LP1108

Connecting to Earth Ground Revision C

NT328G Industrial Ethernet

Managed Switch Series

Connecting to Earth Ground

The switch must be properly grounded for optimal system performance. The grounding connection is for both PE and FG.

WARNING: The grounding pin of the AC power connector and middle pin of the DC

power terminal block have no function. Only use the device grounding screw for a correct

installation.

AVERTISSEMENT: La broche de mise à la terre du connecteur d’alimentation secteur et la

broche centrale du bloc de borne d’alimentation CC n’a aucune fonction. Utilisez uniquement

la vis de mise à la terre de l’appareil pour une installation correcte.

Use 18AWG-12AWG wire rated 85 °C for power connection.

Tighten the grounding screw with 8.8-13.2 inch-lbs.

Use with Copper Conductors Only.

Utilisez un fil de 18AWG-12AWG évalué à 85 °C pour le raccordement électrique.

Serrer la vis de mise à la terre à 8.8-13.2 inch-lbs.

Utiliser uniquement avec des conducteurs en cuivre.

Alarm Relay Connecting

The alarm relay output contacts have a current carrying capacity of 30 VDC. Contact 1A is a 2 pin terminal block that

attaches to the NT328G’s ALM port. The alarm relay contact is a “Normally open” contact that will close when it detects

any power failures.

Note: Use 24 AWG wire rated 85 °C for connection. Tighten the screw with 8.8-13.2 inch-lb.

Note: Utilisez un fil de calibre 24 AWG à 85 °C pour la connexion. Serrer la vis à 8.8 - 13.2 inch-lb.

Grounding Screw

ALM Port

External Power

System

Alarm

System

Drawing No. LP1108 Chapter 2 Installation

Revision C Power Connections

NT328G Industrial Ethernet

Managed Switch Series

Power Connections

Terminal Block Connector

The switch can be powered from two UL61010-2-201 certified SELV power supplies (input range 100 V-240 V). The AC

power connector is a 3P terminal block; “L” stands for Line and “N” stands for Neutral. Tighten the wire-clamp screws with

Torque Value 1.7 inch-lbs to prevent the wires from being loosened.

After completing chassis installation, apply power to the fused power distribution panel feeding the chassis.

Use an Overcurrent Protection device (circuit breaker) rated 20 A at main power supply circuit.

Note: The AC power should be connected to a well-fused power supply. Use 18AWG-12AWG wire rated 85 °C for

power connection. Tighten the screw with 8.8-13.2 inch-lbs.

Note: L’alimentation en courant alternatif doit être connectée à une alimentation bien protégée.

Utilisez un fil de 18AWG-12AWG évalué à 85 °C pour le raccordement électrique. Serrer la vis à 8.8-13.2 inch-lbs.

WARNING: Ensure that all power sources to the chassis (power

distribution panel) are turned off during the connection.

AVERTISSEMENT: Assurez-vous que toutes les sources d’alimentation

du châssis (panneau de distribution d’alimentation) sont éteintes pendant

la connexion.

Connecting to the Ethernet Port (RJ45 Ethernet)

The switch provides two types of electrical (RJ45) and optical (mini-GBIC) ports.

To connect the Ethernet port via RJ45:

z To connect to a PC, use a straight-through or a cross-over Ethernet cable.

z To connect the switch to an Ethernet device, use UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair)

Ethernet cables.

Connecting to the Ethernet Port (Fiber, SFP/SFP+)

For available 100 or 1000 Mbps fiber ports, use the SFP LC style connectors. For available 10 Gbps ports (ports 25 - 28

only), use the SFP+ LC style connectors.

The connectors are available with multimode or singlemode transceivers.

The Optical Transceiver must use a UL Certificated Class 1 laser product that shall comply with CDRH 21CFR 1040.10

and 1040.11.

DANGER: Never attempt to view optical connectors that might be emitting

laser energy. Do not power up the laser product without connecting the

laser to the optical fiber and putting the cover in position, as the laser ouputs

will emit infrared light.

AVERTISSEMENT: Ne tentez jamais de voir des connecteurs optiques qui

émettent de l’énergie laser. N’allumez pas le produit laser sans connecter le

laser à la fibre optique et en plaçant le couvercle en position, car les sorties

laser émettront la lumière laser infrarouge.

Chapter 2 Installation Drawing No. LP1108

LED Status Indications Revision C

NT328G Industrial Ethernet

Managed Switch Series

LED Status Indications

SYSTEM STATUS INDICATORS

LED NAME INDICATOR/COLOR CONDITION

SYS

On/Green System is working normally

Flashing/Green

System booting, or database saving or remote

download is in-progress

Off System is not working or does not have power

On/Green P1 power line has power

Off P1 power line is disconnected or does not have power

On/Green P2 power line has power

Off P2 power line is disconnected or does not have power

Alarm

On/Red Alarm event

Off No alarm

RR (Ring Role)

On/Green One of 3 Ring groups is enabled and is in the Master role

Off Ring is in the slave role

RS (Ring Status)

On/Green Ring failure occurs and is detected

Off No ring failure detected

PORT STATUS INDICATORS

LED NAME INDICATOR/COLOR CONDITION

RJ45 Port Link/Act

On/Green Ethernet link is up but no traffic is detected

Flashing/Green Ethernet link is up and there is traffic detected

Off Ethernet link is down

RJ45 Port Speed

On/Yellow A 1000 Mbps connection is detected

Off

No link detected or a 10 Mbps, 100 Mbps connection is

detected

SFP Port Link (Port 9 to 24)

(NT328G-20SFP)

On/Green Ethernet link is up

Flashing/Green Ethernet link is up and there is traffic detected

Off Ethernet link is down

SFP Speed (100/1000M) (Port 9 to 24)

(NT328G-20SFP)

On/Yellow SFP port speed is 1000 Mbps

Off SFP port speed is 100 Mbps or link down

SFP+ (10G) Port Link (Port 25 to 28)

On/Green Ethernet link is up

Flashing/Green Ethernet link is up and there is traffic

Off Ethernet link is down

SFP+ (10G) Speed (Port 25 to 28)

On/Yellow SFP port speed is 10 Gbps

Off SFP port speed is 1 Gbps or link down

La page est en cours de chargement...

red lion NT328G Hardware Manuel utilisateur

Marque: red lion

Modèle: NT328G Hardware

Catégorie: Commutateurs réseau

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: red lion NT328G Hardware User manual

red lion NT328G Hardware Manuel utilisateur

red lion NT328G Hardware Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents