Philips AC4550 Manuel utilisateur

1 2

I J K L M N

G

H

A

B

C D E

F

4241 211 04981

AC4550

EN User manual 1

DA Brugervejledning 21

DE Benutzerhandbuch 40

ES Manual del usuario 63

FI Käyttöopas 85

FR Mode d’emploi 105

IT Manuale utente 127

NL Gebruiksaanwijzing 149

NO Brukerhåndbok 172

SV Användarhandbok 192

23

3

11

7

15

2119

5

13

9

17

6

14

10

18

24

4

12

8

16

2220

25

27 28 29

26

23

1EN

English

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product Overview (g. a) 5

Controls overview (g. b) 5

3 Getting started 6

Installing lters 6

Wi-Fi connection 6

4 Using the appliance 8

Understanding the air

quality light 8

Turning on and o 9

Changing the Auto mode

setting 9

Changing the fan speed 10

Using the light on/o function 11

Setting the child lock 11

5 Cleaning 12

Cleaning schedule 12

Cleaning the body of the

appliance 12

Cleaning the air quality sensor 12

Cleaning the pre-lter 13

6 Replacing the air

purication lters 14

Understanding the healthy

air protect lock 14

Replacing the lters 14

7 Storage 15

8 Troubleshooting 16

9 Guarantee and service 19

Order parts or accessories 19

10 Notices 19

Electromagnetic elds (EMF) 19

Recycling 20

Notice 20

Simplied EU declaration of

conformity 20

2 EN

1 Important

Safety

Read this user manual carefully

before you use the appliance, and

save it for future reference.

Danger

• Do not let water or any

other liquid or ammable

detergent enter the

appliance to avoid electric

shock and/or a re

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(ammable) detergent to

avoid electric shock and/

or a re hazard.

• Do not spray any

ammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

service center authorized

by Philips, or similarly

qualied persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power

cord, or the appliance

itself is damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

3EN

English

• Make sure that foreign

objects do not fall into the

appliance through the air

outlet.

• Standard WiFi interface

based on 802.11b/g/n at

2.4 GHz with a maximum

output power of 31.62 mW

EIRP.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use the

appliance on a dry, stable,

level, and horizontal

surface.

• Leave at least 20cm free

space behind and on both

sides of the appliance

and leave at least 30cm

free space above the

appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injuiry.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all lters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips lters specially

intended for this

appliance. Do not use any

other lters.

• Combustion of the lter

may cause inreversible

human hazard and/or

jeopardize other lives. Do

not use the lter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

4 EN

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

• The appliance is only

intended for household

use under normal

operating conditions.

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply rst.

• Do not move the

appliance by pulling its

power cord.

• Always cleanse your

hands after changing the

lters.

• Always lift or move the

appliance by the handle

on back side of the

appliance.

• Do not insert your ngers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

replaces.

• Always unplug the

appliance after use

and before cleaning,

or carrying out other

maintenance or replacing

the lters.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

5EN

English

Controls overview

(g. b)

Control buttons

I Power on/o button

J Light on/o button

K Auto mode button

L Fan speed button

M Child lock button

N Reset button

Display panel:

Wi-Fi indicator

Gas display

PM2.5 display

Indoor Allergen Index

Filter replacement alert

Sleep mode

Pre-lter cleaning alert

Child lock indicator

2 Your air purifier

Congratulations on your purchase,

and welcome to Philips!

To fully benet from the support that

Philips oers, register your product

at www.philips.com/welcome.

This appliance works with an air

ltration system. Read this user

manual carefully before you use

the appliance, and save it for future

reference.

Product Overview (g. a)

A Display panel

B Air quality light

C

NanoProtect lter Series 3*

(FY3433)

D

NanoProtect lter Active

Carbon* (FY3432)

E Pre-lter

F Front cover

G Air quality sensor

H Control buttons

*Hereinafter referred to as "air

purication lter".

6 EN

7 To reattach the front cover,

mount the cover onto the

bottom of the appliance rst (1).

Then, gently push the top of the

cover against the body of the

appliance (2) (g. i).

Wi-Fi connection

Setting up the Wi-Fi connection

for the rst time

1 Download and install the

"Air Matters" app from the

App Store or Google play.

2 Put the plug of the air purier in

the power socket and touch

to turn on the air purier.

» The Wi-Fi indicator blinks

orange for the rst time.

3 Make sure that your smartphone

or tablet is successfully

connected to your Wi-Fi network.

4 Launch the "Air Matters" app

and click on "Connect an Air

Purier or Monitor" on the top of

the screen. Follow the onscreen

instructions to connect the air

purier to your network.

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the

troubleshooting section, or the

help section in the "Air Matters"

App for extensive and up-to-

date troubleshooting tips.

3 Getting started

Installing lters

Remove all packaging of the lters

before using the appliance. Unpack

them and place them into the

appliance described as follows:

Note

• Make sure that you place the

air purication lter in the

appliance rst and then the pre-

lter.

• Make sure that the side with

the tag is pointing towards you

when installing the lter.

1 Pull the top part of the front

cover to remove it from the

appliance (g. c).

2 Press the two clips down and

pull the pre-lter towards you

(g. d).

3 Remove all lters (g. e).

4 Remove all packaging materials

of the air purication lter

(g. f).

5 Put the unpacked air purication

lter into the appliance (g. g).

6 Put the pre-lter back into the

appliance (g. h).

Note

• Make sure that all hooks of the

pre-lte is properly attached to

the purier.

7EN

English

Note

• This instruction is only valid

when the air purier is being

set up for the rst time. If the

network has changed or the

setup needs to be performed

again, consult section "Reset

the Wi-Fi connection" on

page 7.

• If you want to connect more

than one air purier to your

smartphone or tablet, you have

to do this one by one. Complete

the set up of one air purier

before you turn on the other air

purier.

• Make sure that the distance

between your smartphone

or tablet and the air purier

is less than 10 m without any

obstructions.

• This App supports the latest

versions of Android and iOS.

Please check www.philips.com/

purier-compatibility for the

latest update of supported

operating systems and devices.

Reset the Wi-Fi connection

Note

• This applies when the default

network to which your purier is

connected has changed.

• Reset the Wi-Fi connection

when your default network has

changed.

1 Put the plug of the air purier in

the power socket and touch

to turn on the air purier.

2 Touch and simultaneously

for 3 seconds until you hear a

beep.

» The air purier goes to

pairing mode.

» The Wi-Fi indicator blinks

orange.

3 Follow the steps 4-5 in "Setting

up the Wi-Fi connection for the

rst time" section.

8 EN

4 Using the

appliance

Understanding the air

quality light

Air quality light

color

Air quality level

Blue Good

Blue-purple Fair

Purple-red Poor

Red Very poor

The air quality light automatically

goes on when the air purier is

switched on, and lights up all colors

in sequence. After approximately

30 seconds, the air quality sensors

select the color that corresponds

to the surrounding air quality of

airborne particles.

The color of the air quality light is

determined by the highest level

among PM2.5, Gas and IAI readings.

IAI

The professional-grade AeraSense

sensor detects the level of indoor

air allergen and with numerical

feedback from 1 to 12 the potential

risk level of indoor air allergens can

be displayed. 1 indicates best air

quality.

IAI level Air quality light

color

1-3 Blue

4-6 Blue-purple

7-9 Purple-red

10-12 Red

GAS

With an advanced gas sensor, a

display ranging from L1 to L4 shows

the level change of potential harmful

gases (incl. VOC, odor, etc.) detected.

L1 indicates best air quality.

Gas level Air quality light

color

L1 Blue

L2 Blue-purple

L3 Purple-red

L4 Red

PM2.5

AeraSense sensing technology

accurately detects and quickly

responds to even the slightest

particle change in the air. It provides

you with reassurance with real-time

PM2.5 feedback.

Most of the indoor air pollutants

fall under PM2.5 – which refers to

airborne particle pollutants smaller

than 2.5 micrometers. Common

indoor sources of ne particles are

tobacco smoke, cooking, burning

candles. Some airborne bacteria

and the smallest mold spores, pet

allergen and dust mite allergen

particles also fall under PM2.5.

9EN

English

PM2.5 level Air quality light

color

≤12 Blue

13-35 Blue-purple

36-55 Purple-red

>55 Red

Turning on and o

Note

• Always place the air purier on

a stable, horizontal, and level

surface with the front of the

unit facing away from walls or

furniture.

• For optimum purication

performance, close doors and

windows.

• Keep curtains away from the air

inlet or air outlet.

• Do not block the inlet or air

outlet with clothing.

1 Put the plug of the air purier in

the wall outlet.

» The air purier beeps.

» All lights go on once and

then go out again.

2 Touch the button to switch on

the appliance (g. j).

» The air purier operates

under the general mode by

default.

» When the air purier is

warming up, " " displays

on the screen.

» After 30 seconds, the air

purier shows the highest

level among IAI/Gas/PM2.5

on the screen. The air

quality sensor automatically

selects the appropriate air

quality light color (g. k).

3 Touch and hold the button for

3 seconds to switch o the air

purier.

Note

• If the air purier stays connected

to the electrical outlet after

turning OFF, the air purier will

operate under the previous

settings when turned ON again.

Changing the Auto mode

setting

You can choose 4 auto modes: the

general mode, the Allergen mode,

the Gas mode or the Pollution

mode.

Auto general mode

The Auto general mode is designed

to fast respond to even the slightest

change in the air that automatically

adjust fan speed to ensure optimal

performance.

• Touch the Auto mode button

to select Auto general mode

(g. l).

» Auto ( ) displays on the

screen for 3 seconds.

» Then the screen shows the

hightest level among PM2.5/

Gas/IAI.

10 EN

Changing the fan speed

There are several fan speeds

available.

When using the manual fan

speed settings, the purier will still

monitor the air quality, but it will

not automatically adjust the fan

speed if it detects changes in the air

quality.

Sleep mode ( )

In sleep mode, the air purier

operates quietly at a very low

speed.

• Touch the fan speed button to

select the sleep mode (g. p).

» The " " displays on the

screen for 3 seconds and

then disappears.

» The sleep mode indicator

goes on.

» After 3 seconds, all the icons

are o, only the sleep mode

indicator goes on.

Manual

• Touch the fan speed button

repeatedly to select the fan

speed you need (speed 1 or

speed 2) (g. q):

» After 3 seconds, the display

shows the previous mode.

Auto allergen mode

The extra-sensitive Auto allergen

mode is designed to react to even

a small change in allergen levels in

the surrounding air (g. m).

• Touch the Auto mode button

to select the Auto allergen mode.

» The IAI level displays on the

screen.

Auto Gas mode

The specially designed Auto

Gas mode is designed to quickly

remove indoor harmful gases such

as formaldehyde (normally found

in plywood), toluene (normally

found in painting), carpet, natural

gas, burning, cooking, air refresher,

perfume and hair spray, cleaning

agents, smoking, pesticide etc. and

maintain it at safe level (g. n).

• Touch the Auto mode button

to select the Auto Gas mode.

» The Gas level displays on

the screen.

Auto pollution mode

The specially designed auto

pollution mode responds to real

time particle level and eectively

remove airborne pollutants such as

PM2.5 (g. o).

• Touch the Auto mode button

to select the Auto pollution

mode.

» Then the PM2.5 level

displays on the screen.

11EN

English

Tip

• If the air quality light lights up

blue, it indicates that the air

quality is good, and you can

select a lower fan speed. On

the other hand, if the air quality

light lights up red-purple or red,

it indicates that the air quality is

unhealthy, and you can select a

higher fan speed to purify the air

more quickly.

Turbo(t)

In Turbo mode, the air purier

operates on the highest speed.

• Touch the fan speed button to

select the Turbo mode ( )

(g. r).

» The " " displays on the

screen.

» After 3 seconds, the display

shows the previous mode.

Using the light on/o

function

With the light on/o button, you can

switch on or o the air quality light,

the display screen and the function

indicator if desired.

1 Touch the light on/o button

once, the air quality light and

all buttons will go o and the

screen be dimmed (g. s).

2 Touch the light on/o button

again, all lights will be on again

(g. t).

Setting the child lock

1 Touch and hold the child lock

button for 3 seconds to

activate child lock (g. u).

» The child lock icon

displays on the screen.

» When the child lock is on,

all the other buttons are not

responsive.

2 Touch and hold the child lock

button for 3 seconds again to

deactivate child lock.

» The child lock icon

disappears.

Note

• You can still control the

appliance through the App even

child lock is activated.

12 EN

5 Cleaning

Note

• Always unplug the appliance

before you clean it.

• Never immerse the appliance in

water or any other liquid.

• Never use abrasive, aggressive,

or ammable cleaning agents

such as bleach or alcohol to

clean any part of the appliance.

• Only the pre-lter is washable.

The air purier lter is not

washable nor vacuum

cleanable.

Cleaning schedule

Frequency Cleaning method

When

necessary

Wipe the surface

of the appliance

with a soft dry

cloth

Clean the air

outlet cover

Every two

months

Clean the air

quality sensor

with a dry cotton

swab

When the pre-

lter cleaning

indicator

lights up and

F0 displays

on the screen

Clean the pre-

lter

Cleaning the body of the

appliance

Regularly clean the inside and

outside of the appliance to prevent

dusts from collecting.

1 Wipe away dust with a soft

dry cloth from the body of the

appliance.

Cleaning the air quality

sensor

Clean the air quality sensor every

two months for optimal functioning

of the appliance. Clean it more

frequently if you use the appliance

in a dusty environment.

Note

• If the air purier is used in a

dusty environment, it may need

to be cleaned more often.

• If the humidity level in the room

is very high, condensation may

develop on the air quality sensor

and the air quality light may

indicate a more poor air quality

even though the air quality is

actually good. If this occurs,

clean the air quality sensor or

use the air purier on a manual

speed setting.

1 Clean the inlet and outlet of

the air quality sensor with a soft

brush (g. v).

13EN

English

2 Remove the air quality sensor

cover (g. w).

3 Clean the air quality sensor,

the dust inlet and the dust

outlet with a damp cotton swab

(g. x).

4 Dry all parts thoroughly with a

dry cotton swab.

5 Reattach the air quality sensor

cover (g. y).

Cleaning the pre-lter

Clean the pre-lter when lights up

and F0 is displayed on the screen

(g. z).

1 Switch o the air purier and

unplug from the wall outlet.

2 Pull the top part of front cover

to remove it from the appliance

(g. c).

3 Press the two clips down and

pull the pre-lter towards you

(g. d).

4 If the pre-lter is very dirty, use

a soft brush to brush away the

dust. Then wash the pre-lter

under running tap water (g. {).

5 Allow the pre-lter to air dry

thoroughly before placing back

in the air purier.

6 Put the pre-lter back into the

appliance (g. h).

Note

• Make sure that the pre-lters

are completely dry before you

put them back in the appliance.

If they are still wet, bacteria may

multiply in them and shorten the

lifetime of the pre-lters.

7 To reattach the front cover,

mount the cover onto the

bottom of the appliance rst (1).

Then, gently push the top of the

cover against the body of the

appliance (2) (g. i).

8 Put the plug of the air purier in

the wall outlet.

9 Touch the button to switch on

the appliance.

10 Touch and hold the reset button

for 3 seconds to reset the

pre-lter cleaning time.

11 Wash your hands thoroughly

after installing lters.

14 EN

6 Replacing the

air purification

filters

Understanding the

healthy air protect lock

This air purier is equipped with a

lter replacement indicator to make

sure that the air purication lter is

in optimal condition when the air

purier is operating. When the lters

need to be replaced, the lter code

displays on the screen and the lter

replacement alert ( ) lights up red.

If the lters are not replaced in time,

the air purier will stop operating

and automatically lock to protect

the air quality in the room. Replace

the lters as soon as possible

according to the lter code.

Replacing the lters

Note

• The air purication lters are not

washable or reusable.

• Always turn o the air purier

and unplug from the electrical

outlet before replacing the

lters.

• Do not clean the lters with a

vacuum.

• If the pre-lter is damaged,

worn or broken, do not use.

Visit www.philips.com/support

or contact the Consumer Care

Center in your country.

Filter alert chart ( g. |)

Filter alert light

status

Action

A5 displays

on the screen

and the lter

replacement

alert goes on.

Replace the

NanoProtect

lter Series 3

(FY3433)

C7 displays

on the screen

and the lter

replacement

alert goes on.

Replace the

NanoProtect

lter Active

Carbon (FY3432)

A5 and C7 display

on the screen

alternately

and the lter

replacement alert

goes on.

Replace both

lters

15EN

English

1 Turn o the air purier and

unplug from the power socket.

2 Take out the used air lter

according to the lter alert light

status displayed on the screen.

Discard used lters (g. }).

Note

• Do not touch the pleated lter

surface, or smell the lter as it

has collected pollutants from

the air.

3 Remove all packaging material of

the new lters (g. f).

4 Put the unpacked air

purication lters back into the

appliance (g. g).

5 Put the plug of the air purier in

the power socket.

6 Touch the button to switch on

the appliance.

7 Touch and hold the reset button

for 3 seconds to reset the

lter lifetime counter.

Note

• Wash your hands after changing

lters.

7 Storage

1 Turn o the air purier and

unplug from the wall outlet.

2 Clean the air purier, air quality

sensor and pre-lter (see

chapter ‘Cleaning’).

3 Let all parts air dry thoroughly

before storing.

4 Wrap the lters and pre-lter

separately in air tight plastic

bags.

5 Store the air purier, lters and

pre-lters in a cool, dry location.

6 Always thoroughly wash hands

after handling lters.

16 EN

8 Troubleshooting

This chapter summarizes the most common problems you could encounter

with the appliance. If you are unable to solve the problem with the information

below, contact the Consumer Care Center in your country.

Problem Possible solution

The appliance

does not work

even though it is

plugged in.

• Check if the top cover is properly installed.

• The lter replacement light has been on continuously

but you have not replaced the corresponding lter. As a

result, the appliance is now locked. In this case, replace

the lter and reset the lter lifetime counter.

The airow that

comes out of

the air outlet

is signicantly

weaker than

before.

• The pre-lter is dirty. Clean the pre-lter (see the

chapter "Cleaning").

The air quality

does not improve,

even though the

appliance has

been operating

for a long time.

• Check if the packing material is removed from the

lters.

• One of the lters has not been placed in the appliance.

Make sure that all lters are properly installed in the

following order, starting with the innermost lter:

1) NanoProtect lter Series 3 (FY3433);

2) NanoProtect lter Active Carbon (FY3432);

3) pre-lter.

• The air quality sensor is wet. The humidity level in your

room is high and causes condensation. Make sure that

the air quality sensor is clean and dry (see the chapter

"Cleaning").

The color of the

air quality light

always stays the

same.

• The air quality sensor is dirty. Clean the air quality

sensor (see the chapter "Cleaning").

17EN

English

Problem Possible solution

The appliance

produces a

strange smell.

• The rst few times you use the appliance, it may

produce a plastic smell. This is normal. However, if the

appliance produces a burnt smell even if removing

lters, contact your Philips dealer or an authorized

Philips service center. The lter may produce smell after

being used for a while because of the absorption of

indoor gases. It’s recommended that you reactivate the

lter by putting it in direct sunlight for repeated use. If

odor still exists, replace the lter.

The appliance is

extra loud.

• If the appliance is too loud, you can change the fan

speed to a lower fan speed level. When using the

appliance in a bedroom at night, choose the silent

speed.

The appliance still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the lter lifetime counter.

Switch on the appliance. Then touch and hold the reset

button ( ) for 3 seconds.

Error code "E1"

displays on the

screeen.

• The motor has malfunctions. Contact the Consumer

Care Center in your country.

Error codes "E2",

"E3", "E4" or "E5"

displays on the

screen.

• The sensor has malfunctions. Contact the Consumer

Care Center in your country.

18 EN

Problem Possible solution

The Wi-Fi setup is

not successful.

• If the router your purier is connected to is dual –

band and currently it is not connecting to a 2.4GHz

network, please switch to another band of the same

router (2.4GHz) and try to pair your purier again. 5GHz

networks are not supported.

• Web authentication networks are not supported.

• Check if the purier is within range of the Wi-Fi router.

You can try to locate the air purier closer to the Wi-Fi

router.

• Check if the network name is correct. The network

name is case-sensitive.

• Check if the Wi-Fi password is correct. The password is

case-sensitive.

• Retry the setup with the instructions in section ‘Set up

the Wi-Fi connection when the network has changed’.

• The Wi-Fi connectivity can be interrupted by

electromagnetic or other interferences. Keep the

appliance away from other electronic devices that may

cause interferences.

• Check if the mobile device is in airplane mode. Make

sure to have the airplane mode deactivated when

connecting to the Wi-Fi network.

• Consult the help section in the App for extensive and

up-to-date troubleshooting tips.

La page est en cours de chargement...

Philips AC4550 Manuel utilisateur

Ce manuel convient également à

Philips AC4550 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents