Reliable Brio Pro 1000CC Manuel utilisateur

Catégorie
Nettoyeurs à vapeur
Taper
Manuel utilisateur
STEAM CLEANING SYSTEM
SYSTÈME DE NETTOYAGE À VAPEUR
SISTEMA DE LIMPIEZA A VAPOR
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
BRIO PRO
1000CC
ENGLISH 01
FRANÇAIS 16
ESPAÑOL 33
01
BRIO PRO 1000CC
STEAM CLEANING SYSTEM
INSTRUCTION MANUAL
ENGLISH
02
RELIABLE. RIGHT THERE WITH YOU.
At Reliable, we do what we love, and take pride in doing it right.
You want whats best for the people, places and things that matter
in your life – from where you live to what you wear. So do we. From
the start, we approach every product with a craftsmans attention
to detail and passion for making it right. Quality, functionality,
design and customer service play an equally important part in
delivering what’s right for you. The Brio Pro 1000CC takes on the
most challenging cleaning and sanitizing jobs with ease. From
hospitals and schools to restaurants and hotels the 1000CC beats
the performance and price of comparable machines in the steam-
cleaning category.
For your safety and to fully enjoy the advantages of this product,
please take a few minutes to read all of the important safeguards
and care instructions. Keep this manual handy and review the
product warranty for your reference.
THANK YOU FOR YOUR PURCHASE. PLEASE SHARE YOUR
RELIABLE PRODUCT EXPERIENCE BY POSTING AN ONLINE
REVIEW ON THE WEBSITE FROM WHICH YOU PURCHASED! WE
GREATLY APPRECIATE IT!
03
IMPORTANT SAFETY INSTRUCTIONS
When using your Reliable steam cleaner, basic safety precautions should always be
followed. Please read the following instructions carefully as they provide important
information concerning how to install, use and care for this steam cleaner.
Use the steam cleaner only for its intended use.
To protect against a risk of electric shock, do not immerse the steam cleaner in water
or any other liquids.
The steam cleaner should always be turned OFF before plugging it into or unplugging
from a wall outlet. Never pull the power cord to disconnect from the outlet; instead
grasp the plug and pull to disconnect.
Do not let the power cord touch hot surfaces. Let the steam cleaner cool completely
before putting it away. Wrap the power cord around the posts that are positioned in
the rear of the steam cleaner when not in use.
Do not operate the steam cleaner with a damaged cord, plug, or if the steam cleaner
has been dropped or damaged. This will void any and all warranties. Please contact
the place of purchase for repair procedure.
Close supervision is necessary for any appliance being used by or near children. Do
not leave the steam cleaner on while unattended.
Do not use this unit in the presence of explosive and/or flammable fumes.
Keep ventilation slots free from dust.
Never drop or insert any object into ventilation slots
To prevent overheating, unravel the electrical cord completely.
Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
To disconnect, turn all controls to the off position, then remove plug from the
main power.
Never put away your steam cleaner while it is still hot. There is no need for emptying
the tank unless you intend to leave it unused for a long period of time.
This product is intended for household or commercial use.
Before turning on the steam cleaner, please ensure that the water tank is full.
This product is grounded for your safety. If you must use an extension cord, make
sure it is rated at least 15 amps, and is grounded.
Never store the appliance in an area that is likely to freeze.
A hydraulically operated safety pressure relief valve is fitted inside the appliance,
it MUST only be replaced by authorised service personnel with an identical valve to
prevent a safety hazard.
The steam generator is fitted with a safety overload cut-out that MUST only be reset
or replaced with an identical component by authorised service personnel to prevent a
safety hazard
Every time the steam generator heats up from cold, the air inside the appliance
prevents steam from being delivered immediately. After one minute of heating up set
the steam regulation knob to maximum position and push-button under pistol grip, to
expel this air
Never put detergents, perfumes or any other chemical substances in the
water tank
A
6
C
E
F
B
D
1
2
4
7
5
3
ELECTRICAL INSTRUCTIONS
To avoid a circuit overload, do not operate another high-wattage appliance on the same
circuit simultaneously with the steam cleaner. If an extension cord is
necessary, a 15-amp rated cord with a polarized plug should be used. Cords rated
for less may overheat and cause damage.
WATER INSTRUCTIONS
Your steam cleaner has been planned for use with normal tap water. In order to extend
the life of this product, if where you are living the level of water hardness is very high, we
recommend using 50% of normal water with 50% of distilled water.
TEST FIRST, THEN CLEAN
Prior to cleaning, test the surfaces to be steam cleaned.
DESCRIPTION OF THE STEAM CLEANER
1. Main switch
2. Main panel
3. Electrical cord
4. Water tank cap
5. Carrying Handle
6. Wheels
7.
Flexible hose connecting outlet
A. Ready steam light
B. Low water control light
C. 1 steam regulation light
D. 2 steam regulation light
E. Hot water injection light
F. Pressure gauge
*Product colour may vary from image shown
04
05
ACCESSORIES WITH STEAM CLEANER
8. Rectangular floor brush
9. Triangular brush with black polyester bristles
10. Black upholstery scraper
11. Funnel
12. (2) 30 mm small brush with black polyester bristles
13. 30 mm small brush with brass bristles
14. 30 mm small brush with stainless steel bristles
15. Extension pipes
16. Nozzle with brass tip
17. 2,45m flexible hose
18. Pad for triangular brush
19. Drain opener key
20. Pad for rectangular brush
21. Towel
HOW TO USE YOUR STEAM CLEANER
1. Remove the water tank cap (4) and fill the water tank (4) up to the maximum of 3L (10 to
11 cups) of water. Secure the cap until snug.
2. Connect the electrical cord to the main power outlet.
3. Plug the flexible steam hose to the steamer (7), and slide on appropriate accessories to
the other end of the steam hose.
4. Turn the main power switch (1) from the “O” position to the “|” position. The switch light
will come on. The steam generator will be supplied water from the water tank via an
electronically controlled pump and the heating of the water begins. It is normal to hear a
buzzing noise from the pump when it is in operation.
When the unit has reached proper pressure, the steam ready light (A) will come on, indicating
that it is now ready for use. The steam ready light (A) will go on and off during use, indicating
the change of pressure in the boiler unit.
Note: When calling for steam at the beginning of each use, you may notice a rapid decrease in
the pressure to the unit. This is normal as the air in the unit is being voided, and should only
last for a short period of time at the beginning of each use.
06
Note: The steam volume being used may be regulated from a dial on the hose handle - See
the following Features section on HOW TO CHANGE STEAM VOLUME.
HANDLE CONTROL
5. When the water level is low in the water tank, a red low water light (B) will light up.
Remove the tank cap (4) and refill the water tank at this time.
6. When finished use, turn the main power switch (1) back to position O, and unplug from
wall. Please allow the unit to cool down prior to storage. If not using the unit for an
extended period of time (more than 3 months), it is advised to drain the steam generator
tank.
To drain the steam generator tank:
Drain the tank only when the unit is cold. Make sure unit is unplugged from wall and the hose
is not connected to the unit. Carefully turn unit upside down so that the bottom is facing
upwards. Unscrew the drainage cap at the bottom of the machine, then open the boiler drain-
age plug using the 20mm hexagonal drain nut opener (provided with the accessory kit (19)).
Once the tank is open, carefully turn the machine around and empty steam generator tank.
Once emptied, replace the drain nut and cap.
Note: Do not store unit where the temperatures may fall below freezing. Water freezing
inside the unit may cause damage to components.
HOW TO CHANGE STEAM VOLUME
1. The steam volume can be controlled by the steam regulator knob located on the steam
hose handle.
Positions 1 to 3 are for steam only. Each successive number provides a higher volume than
the last. (1. Low. 2. Medium. 3. High.)
Position 4 activates the hot water injection function. This feature mixes steam and hot water
to produce a strong cleaning jet. **Please note in this position, the steam pressure and water
level will go down much more quickly than if steam only is being used.
THIS MODEL IS PROVIDED WITH THE
FOLLOWING FEATURES
STEAM READY LIGHT (A)
A green light signals that the steam has reached the maximum working pressure and the unit
is ready to be used.
LOW WATER CONTROL LIGHT (B)
A red low water warning light signals that the water tank needs to be refilled. If you wish to
continue steam cleaning, unscrew the water tank cap (4) and refill the tank.
07
STEAM REGULATIONS LIGHTS AND HANDLE CONTROL
The two yellow lights signal the three possible regulations of steam quantity/strength. The
first steam regulation on-light (C) corresponds to the minimum steam quantity, position 1 on
the handle (G). The second regulation on- light (D) corresponds to a medium steam quantity,
position 2 on the handle (H). Both the first and second regulation on-lights (C + D) correspond
to the maximum steam quantity, position 3 on the handle (I).
HOT WATER INJECTION LIGHT AND HANDLE CONTROL
This yellow light signals the activation of the hot water Injection feature. When this light (E)
is on (position 4 on the handle (J), the steam is blended with hot water, making it ideal for
rinsing applications.
USING THE ACCESSORIES
CONNECTING THE ACCESSORIES
Lift the hinged cover (7) on the lower front of the steam generator and fit the hose plug con-
nector (16) by depressing the red button and pushing firmly in until a ‘click’ is heard indicating
that the hose plug is inserted all the way. The hose MUST be properly connected, otherwise
the solenoid valve will not function and steam will not be delivered through the hose or
attachments. To deliver steam, activate the button situated on the underside of the handle.
LARGE RECTANGULAR FLOOR BRUSH
For cleaning hard floors, attach the extension tubes (15) to the angle adapter to use the large
rectangular brush (8). Attach a dry cloth to the brush for the most effective cleaning of hard
floors or carpet surface cleaning.
TRIANGULAR
/
UPHOLSTERY BRUSH
The triangular brush (9) is used where it is impossible or awkward to use the large brush.
UPHOLSTERY, DRAPERY, BEDDING, ETC.
Cover the brush with a clean dry cloth fixing it through the spring. Use a rapid back and forth
motion, making sure that you do not over saturate the material with steam.
IMPORTANT: Prior to cleaning, do a patch test in an area that is not easily seen before you
begin. Steam and moisture may cause damage to some surfaces.
08
HIGH PRESSURE NOZZLE WITH SMALL ROUND
BRUSH
(
NYLON, BRASS, STAINLESS STEEL
)
The high-pressure nozzle can be used with or without one of the small round brushes sup-
plied with the steam cleaner. For items that are particularly prone to scratches, it is best to
use the nozzle without a brush. For all other areas, start with the nylon brush (least abrasive)
and carefully work your way up to the brass, then the stainless steel brush (optional). It is
always better to use care when using the brushes to prevent damage or scratching.
The use of the steam nozzle alone is particularly good for cleaning and degreasing many
working surfaces, ventilation hoods, see through oven doors, ventilation grating, kitchen
furniture, stainless steel or enamel sinks, hand-basins, bath-tubs, water taps (to remove scale
and water residue), doors, metal frames, car wheel rims, pet areas etc.
The nylon brush, because of its softness, is ideal for removing the dirt in grout, sinks and
other surfaces where you need some light scrubbing action, but care must be taken not to
scratch the surface.
Tougher cleaning jobs may require the use of the brass brush that is supplied. Please make
sure you are careful that it does not scratch the surface with this tool. Brass is tougher than
nylon, but softer than stainless steel. For surfaces (grout for example) where the dirt is not
being properly lifted with the nylon brush, carefully using the brass brush may give the best
results.
For the toughest cleaning assignments (very caked on grease, rust, barbecue grills, very dirty
grout), we recommend that you purchase the optional stainless steel brush that is available
through your dealer, or at www.reliablecorporation.com
When using the steam nozzle with or without the brushes, you will need a cloth to wipe up
the moisture and dirt that has been lifted through cleaning.
ATTACHMENT COUPLINGS
If the attachment connections dry up after intensive use, put a small amount of lubricant
(Vaseline) around the O-rings on the male attachment.
FILLING THE TANK
If on the main panel (2), the water level control light (B) comes on during use and you
would like to continue using the steam cleaner, you will need to follow these steps:
1. Unscrew the black water tank cap (4)
2. Fill the tank with water (see water instructions for details).
3. Place the tank cap (4) back on.
If you're using the trolley with the external water bottle connected to the water tank cap,
follow the same steps listed above but directed to the water bottle.
MAINTENANCE OF THE BOILER
To maintain your steam cleaner in good condition and to ensure consistent performance, we rec-
ommend that you clean the boiler once or twice a year depending on the hardness of the water.
CLEANING INSTRUCTIONS
ATTENTION: Before draining the boiler, please make sure that the machine is depressurized and
cool. Ensure that it is also disconnected from the power source.
1. Take off the drainage cap at the bottom of the machine using a coin.
2. Completely unscrew the boiler brass drainage nut from the boiler, using a 20 mm hexago-
nal key (19).
3. To clean the boiler, we recommend using a descaling powder that can be purchased from
www.reliablecorporation.com
4. Add the descaling powder with a mixture of warm water through the bottom of the boiler.
5. Let the mixture of warm water and powder sit for 24 hours.
6. Rinse thoroughly to ensure that all of the descaling powder has been removed
7. After cleaning, twist close the drainage nut and replace the cap.
NOTE: if you see that the water that is coming out from the boiler is full of dirt/limestone, we
suggest that you repeat this operation more frequently, perhaps three to four times per year.
TECHNICAL DESCRIPTION
120V ~ Power 1750W
Cold water tank capacity 3,1L
Boiler capacity 1,6L
Working pressure 6 bar
Continuous steam system (CSS) Yes
Steam Regulations 3
Safety valve Yes
Hot water injection Yes
Limestone Magnetic Filter Yes
Certifications cETLus
09
10
(PROBLEM) There is no steam, all the lights remain on and the pump is continuously running.
(POSSIBLE CAUSES) 1. You're using too much steam (pos. 4). 2. Water pump is broken.
(REMEDY) 1. Turn off main switch (1) wait 1 minute then turn back and wait for green light (A) to
turn on. 2) Contact Reliable Corporation for service.
PROBLEM
No steam is released through
the steam fi ttings.
Water drops leak from the
attachments.
Dirty water is coming out.
Not enough steam pressure.
Pump works continuously.
Rapid drop in pressure.
REMEDY
1. Turn on main switch (1)
2. If the red light (B) is fl ashing
on and off and you can hear
a noise, fi ll up the tank.
3. Plug unit into outlet
4. Wait for the green light (A)
to turn on.
1. Wait for light (A) to turn on.
2. Let water run through system
until steam comes out.
1. Follow cleaning instructions
in book.
1. Turn the dial until the desired
pressure is reached.
1. Press the trigger (on/off) then
turn the unit on and keep the
trigger pressed down for 30
seconds.
1. Turn the knob on the handle
to #4 to release excess water.
(Repeat if necessary).
POSSIBLE CAUSES
1. Steam unit is not turned on.
2. Water tank is empty.
3. Unit is not plugged in.
4. Generator is not fully heated.
1. Unit is not fully heated.
2. Condensation was created
from non-use.
1. Scale may have built up.
1. The dial on the handle may
be set too low.
1. Air in water line.
1. Too much water in the boiler.
TROUBLESHOOTING
Do not operate the steam cleaner with a damaged electrical cord, plug or if the steam
cleaner has been dropped or damaged. To avoid risk of electric shock, do not disassemble
or attempt to repair the unit on your own. Return the unit to Reliable Corporation (see
warranty) for examination repair.
1000CC TROLLEY ASSEMBLY INSTRUCTIONS
1. Trolley base unit
2. Tray to carry accessories
3. Trolley handle
4. Rotating wheels (2)
5. Back wheels (2)
6. Chrome back wheel cover (4)
7. Self locking nuts (2)
8. Washers (4)
9. Brass wheel cover (2)
10. Fixing cap (4)
11. Water bottle with tap
12. Transparent silicone hose
13. Cap
14. Wrench
1. Turn the trolley upside down in order to
easily screw the rotating back wheels
into the threaded holes ( g. 1).
2. Assemble the wheel in the following
order: washer, chrome back wheel cover,
back wheel, brass wheel cover, chrome
back wheel cover, washer and x them
with a self-locking nut on the shaft ( g.
2). Screw using the spanner, please be
careful not to close them too tightly.
3. Hold the trolley up and put the steam
cleaner in it. Tilt the machine forward in
order to position the front wheels in their
place. This will allow a correct positioning
of the back wheels also (fi g. 3)
*Be sure that the electrical cord support
is not attached to the Brio Pro before
installing onto the trolley.
4. Put the accessory tray on the trolley
base unit and screw the xing caps ( g.
4).
11
Fig. 1
Fig. 2
Fig. 3
Fig. 4
5. The fi xing caps should be tightened until
the trolley structure is secure ( g. 5).
6. Screw the cap to the steam cleaner
tank. ( g. 6)
7. Put the water tank on the accessory
tray and connect the silicone hose to
the machine valve cap, ensuring that it
is well connected to avoid water leakage.
Turn the water tap to the OFF position
and fi ll the tank with water (fi g.7).
8. Open the tap to begin using the water.
NOTE: It is important to close the tap when
the machine is turned off.
12
Fig. 6
Fig. 8
Fig. 5
Fig. 7
13
ADDITIONAL INFORMATION
THE WATER TROLLEY SYSTEM DOES NOT REQUIRE THE BOTTLE TO BE
REMOVED FOR FILLING.
During use do NOT pull the steam hose with force, it could move the machine
on the trolley.
If you need to put the WATER BOTTLE on a FLAT surface, rotate the tap to
a horizontal position (fig.8).
Reliable Corporation (“Reliable”) warrants to the original purchaser of the boiler noted above
from Reliable (the “Reliable Boiler Tank”) that it will be free from defects in materials and
workmanship when utilized for normal use by the original purchaser only. Should the Reliable
Boiler Tank need replacement, Reliable will do so at no parts and labor cost to the original
purchaser, exclusive of shipping.
Subject to the conditions and limitations set forth below, Reliable will either repair or replace
any part of a Reliable Boiler Tank that proves defective by reason of improper workmanship
or materials. If the defective Reliable Boiler Tank is no longer available and cannot be repaired
effectively or replaced with an identical model, Reliable shall replace the defective Reliable
Boiler Tank with a current Reliable Boiler Tank of equal or greater value. Repaired parts or
replacement products will be provided by Reliable on an exchange basis, and will be either new
or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace a
Reliable Boiler Tank, it will refund the current value of that Reliable Boiler Tank at the time the
warranty claim is made.
This limited warranty does not cover any damage to a Reliable Boiler Tank that results from
improper installation, accident, abuse, misuse, unreasonable use, natural disaster, insufficient
or excessive electrical supply, abnormal mechanical or environmental conditions or any
unauthorized disassembly, repair or modification. This limited warranty does not extend to
any indirect, consequential or incidental damages that may be suffered by a user from the
use of a Reliable Boiler Tank, including without limitation, any liability for third party claims
for damage, and is limited to the amount paid by the original purchaser for the Reliable Boiler
Tank with respect to which this limited warranty protection applies. This limited warranty does
not apply with respect to products that have been altered or which are missing serial numbers
or for products not purchased directly from Reliable or a dealer authorized by Reliable to sell
the Reliable Boiler Tank.
This limited warranty is the only warranty that applies to the Reliable Boiler Tank, supersedes
any and all terms that may be contained in any other document or purchase order and may
not be altered or amended except expressly in writing by Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our
customer service group at 1 800 268 1649 or at support@reliablecorporation.com. You will be
required to submit an original receipt via fax or e-mail. The receipt must reflect that you are
the original purchaser, the product was bought directly from Reliable or from an authorized
Reliable dealer and that the warranty claim is being made in compliance with the terms set
out in this document or any subsequent document issued by Reliable in connection with this
policy. You will be issued a return authorization number (RA#) and asked to ship the defective
product together with proof of purchase and RA#, prepaid insured to the following address:
Reliable Corporation, 5–100 Wingold Ave, Toronto, ON M6B 4K7.
Freight collect shipments will be refused. The risk of loss or damage in transit will be borne
by the customer. Once Reliable receives the defective product, it will initiate the repair or
replacement process.
RELIABLE CORPORATION LIFETIME
PRODUCT WARRANTY POLICY FOR
PRESSURIZED STEAM BOILER TANKS
14
Reliable Corporation (“Reliable”) warrants to original purchaser of its products that
every product sold by Reliable (a “Reliable Product”) is free from defects in material and
workmanship for a period of one year from the date of purchase if properly used and
maintained. Subject to the conditions and limitations set forth below, Reliable will either
repair or replace any part of a Reliable Product that proves defective by reason of improper
workmanship or materials. If the defective Reliable Product is no longer available and cannot
be repaired effectively or replaced with an identical model, Reliable shall replace the defective
Reliable Product with a current Reliable Product of equal or greater value. Repaired parts or
replacement products will be provided by Reliable on an exchange basis, and will be either new
or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace
a Reliable Product, it will refund the current value of that Reliable Product at the time the
warranty claim is made.
This limited warranty does not cover any damage to a Reliable Product that results from
improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive
electrical supply, abnormal mechanical or envsteamermental conditions, wear and tear
resulting from normal use of the product, or any unauthorized disassembly, repair, or
modification. This limited warranty does not extend to any indirect, consequential or incidental
damages that may be suffered by a user or from the use of a Reliable Product, including
without limitation, any liability for third party claims for damage, and is limited to the amount
paid by the original purchaser Reliable Product with respect to which this limited warranty
protection applies. This limited warranty does not apply with respect to products that have
been altered or which are missing serial numbers or for products not purchased directly from
Reliable or a dealer authorized by us to sell Reliable Products.
This limited warranty is the only warranty that applies to any Reliable Product, supersedes any
and all terms that may be contained in any other document or purchase order and may not be
altered or amended except expressly in writing by Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our
customer service group at 1-800-268-1649 or at support@reliablecorporation.com.
You will be required to submit an original receipt via fax or e-mail. The receipt must reflect that
you are the original purchaser, the product was bought directly from
us or from an authorized Reliable dealer and that the warranty claim is being made within the
warranty period. You will be issued a return authorization number (RA#) and asked to ship the
defective product together with proof of purchase and RA#, prepaid insured to the following
address:
Reliable Corporation, 5-100 Wingold Avenue, Toronto, ON M6B 4K7. Freight collect shipments
will be refused. The risk of loss or damage in transit will be borne by
the customer. Once Reliable receives the defective product, it will initiate the repair or
replacement process.
If you have any questions regarding this warranty, you may write to:
Reliable Corporation
100 Wingold Avenue, Unit 5
Toronto, Ontario
Canada M6B 4K7
www.reliablecorporation.com
RELIABLE PRODUCTS WARRANTY
15
16
BRIO PRO 1000CC
SYSTÈME DE NETTOYAGE À VAPEUR
GUIDE D'UTILISATION
FRANÇAIS
17
RELIABLE. PROCHE DE VOUS.
Chez Reliable, nous faisons ce que nous aimons et sommes
fiers de bien le faire. Vous voulez ce qu’il y a de mieux pour les
personnes, les lieux et les choses importantes de votre vie - depuis
l’endroit où vous vivez jusqu’aux vêtements que vous portez. Nous
aussi. Depuis le début, nous approchons chaque produit avec une
attention aux détails artisanale et la passion de le fabriquer. La
qualité, la fonctionnalité, la conception et le service à la clientèle
jouent des rôles également importants dans notre mission
de vous fournir ce qui vous correspond. Le Brio Pro 1000CC
prend en charge en toute facilité les travaux de nettoyage et
d’assainissement les plus difficiles. Des hôpitaux et établissements
scolaires en passant par les restaurants et hôtels, le Brio Pro
1000CC est supérieur, en rendement et en prix, aux équipements
comparables de la catégorie du nettoyage à la vapeur.
Pour votre sécurité et pour profiter pleinement des avantages de
ce produit, veuillez prendre quelques minutes pour lire toutes les
importantes mises en garde et les directives d’entretien. Gardez
ce manuel et la garantie du produit à portée de main pour vous y
référer ultérieurement.
NOUS VOUS REMERCIONS DE VOTRE ACHAT. NOUS VOUS
INVITONS À FAIRE PART DE VOTRE EXPÉRIENCE EN PUBLIANT
UNE ÉVALUATION EN LIGNE SUR LE SITE WEB AUPRÈS DUQUEL
VOUS AVEZ EFFECTUÉ VOTRE ACHAT ! NOUS VOUS EN SERIONS
RECONNAISSANTS !
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Reliable Brio Pro 1000CC Manuel utilisateur

Catégorie
Nettoyeurs à vapeur
Taper
Manuel utilisateur