Winmate E500RM8-4EBS Manuel utilisateur

Please read these instructions carefully before using this product, and save this manual for future use.

5-inch Rugged Mobile

Computer

E500RM8 Series

ARM® Cortex™-A53 Octa-core, 1.3 GHz

Android 7.0

User Guide

Document Version 1.3

2

Rugged Mobile Computer E500RM8 User Guide

Contents

PREFACE ......................................................................................................................................................................... 5

READ ME FIRST .............................................................................................................................................................. 7

SAFETY INFORMATION ..................................................................................................................................................... 7

EXPOSURE TO RADIO USE ............................................................................................................................................... 9

RF EXPOSURE INFORMATION ......................................................................................................................................... 10

ELECTROSTATIC DISCHARGE ......................................................................................................................................... 10

DRIVING........................................................................................................................................................................ 10

HANDLING AND MAINTENANCE ....................................................................................................................................... 10

ABOUT THIS USER GUIDE ........................................................................................................................................... 13

CHAPTER 1: GETTING STARTED................................................................................................................................ 14

1.1 INTRODUCTION ........................................................................................................................................................ 14

1.2 PRODUCT FEATURES ............................................................................................................................................... 14

1.3 UNPACKING............................................................................................................................................................. 15

1.4 DESCRIPTION OF PARTS .......................................................................................................................................... 16

1.5 DIMENSIONS ........................................................................................................................................................... 19

1.6 GETTING STARTED .................................................................................................................................................. 19

1.6.1 SIM Card and SD Card Installation ............................................................................................................... 20

1.6.2 Battery Installation ......................................................................................................................................... 20

1.6.3 Charging the Battery ..................................................................................................................................... 22

1.7 TURNING ON AND OFF THE DEVICE .......................................................................................................................... 23

1.7.1 Turning On ..................................................................................................................................................... 23

1.7.2 Turning Off ..................................................................................................................................................... 23

1.8 RESETTING TO FACTORY DEFAULTS ......................................................................................................................... 24

CHAPTER 2: USING THE E500RM8 ............................................................................................................................. 25

2.1 USING THE TOUCH SCREEN ..................................................................................................................................... 25

2.2 WAKING UP THE PHONE .......................................................................................................................................... 26

2.3 USING THE HOME SCREEN ....................................................................................................................................... 26

2.3.1 Personalizing Home Screen .......................................................................................................................... 27

2.3.2 Viewing other parts of the Home Screen ...................................................................................................... 29

2.4 STATUS AND NOTIFICATION ICONS ........................................................................................................................... 30

2.4.1 Notification Icons ........................................................................................................................................... 30

2.4.2 Status Icons ................................................................................................................................................... 30

2.5 USING THE ON-SCREEN KEYBOARD ......................................................................................................................... 31

2.5.1 Entering Text ................................................................................................................................................. 31

2.5.2 Editing Text .................................................................................................................................................... 32

2.6 DISPLAY SETTINGS .................................................................................................................................................. 33

2.7 AUDIO PROFILE SETTINGS ....................................................................................................................................... 35

2.7.1 Sounds Settings ............................................................................................................................................ 35

2.7.2 Adjusting Volume........................................................................................................................................... 35

2.8 LANGUAGE AND KEYBOARD SETTINGS ...................................................................................................................... 36

2.8.1 Changing the Keyboard Language................................................................................................................ 37

2.9 USING THE PHONE .................................................................................................................................................. 37

2.9.1 To Make a Phone Call ................................................................................................................................... 37

2.9.2 To Make a Phone Call Using Contact List .................................................................................................... 38

2.9.3 Answering or Declining Calls ......................................................................................................................... 38

2.10 MESSAGING .......................................................................................................................................................... 38

2.10.1 Sending Text Messages .............................................................................................................................. 38

2.10.2 Opening and Responding to Text Messages .............................................................................................. 39

2.11 ABOUT PHONE ...................................................................................................................................................... 39

3

Preface

CHAPTER 3: USING WINMATE® HOME MANAGER (WHM) ..................................................................................... 40

3.1 HOW TO LOCK APPLICATIONS .................................................................................................................................. 40

3.2 HOW TO UNLOCK APPLICATIONS .............................................................................................................................. 42

3.3 HOW TO CHANGE PASSWORD .................................................................................................................................. 44

CHAPTER 4: CONNECTING TO NETWORK AND DEVICES ...................................................................................... 45

4.1 CONNECTING TO MOBILE NETWORKS ....................................................................................................................... 45

4.1.1 Checking the Network (GPRS/3G/4G) Connection ....................................................................................... 45

4.1.2 Turning on Data Service ................................................................................................................................ 45

4.2 CONNECTING TO WI-FI NETWORKS .......................................................................................................................... 46

4.2.1 Turning ON the Wi-Fi and Connecting to Wi-Fi networks ............................................................................. 46

4.2.2 Adding Wi-Fi Network .................................................................................................................................... 47

4.3 CONNECTING TO BLUETOOTH DEVICES .................................................................................................................... 48

4.3.1 Turning Bluetooth ON or OFF ....................................................................................................................... 48

4.3.2 Connecting to Bluetooth Device .................................................................................................................... 48

4.3.3 Disconnecting Bluetooth Device .................................................................................................................... 48

4.4 CONNECTING TO COMPUTER VIA USB ...................................................................................................................... 49

4.4.1 USB Computer Connection ........................................................................................................................... 49

4.4.2 USB Debugging Settings ............................................................................................................................... 50

CHAPTER 5: USING CAMERA ..................................................................................................................................... 51

5.1 CAPTURING PHOTOS OR VIDEO ................................................................................................................................ 51

5.1.1 Opening Camera ........................................................................................................................................... 51

5.1.2 Taking Pictures .............................................................................................................................................. 51

5.1.3 Switching Between Front and Rear Cameras ............................................................................................... 51

5.1.4 Viewing Pictures ............................................................................................................................................ 52

5.1.5 Shooting Videos ............................................................................................................................................ 52

5.1.6 Opening the Gallery ...................................................................................................................................... 52

CHAPTER 6: CAPTURING DATA ................................................................................................................................. 53

6.1 USING NFC ............................................................................................................................................................ 53

6.1.1 NFC Tag Support .......................................................................................................................................... 53

6.1.2 NFC Location ................................................................................................................................................. 53

6.1.3 How to Use NFC............................................................................................................................................ 54

6.2 USING BARCODE READER ........................................................................................................................................ 55

6.2.1 Barcode Reader Location .............................................................................................................................. 55

6.2.2 Android Winmate® Data Collection (WDC) ................................................................................................... 55

6.2.3 Where to Find WDC ...................................................................................................................................... 55

6.2.4 How to Turn On and Off the Power of Barcode Reader................................................................................ 56

6.2.5 How to Change the Symbologies of Barcode ............................................................................................... 57

6.2.6 How to Add Commands to the Barcode Output ............................................................................................ 57

6.2.7 How to Change the Scan Type of the Barcode Reader ................................................................................ 58

6.2.8 How to Change the Setting of the WDC or Reset to Default ........................................................................ 58

6.2.9 Scanning Barcodes ....................................................................................................................................... 59

6.2.10 Scanning Tips and Considerations.............................................................................................................. 60

6.3 USING SMART CARD READER .................................................................................................................................. 60

6.3.1 Smart Card Reader Location ......................................................................................................................... 60

6.3.2 How to Use Smart Card Reader .................................................................................................................... 61

6.3.3 Smart Card Reader SDK ............................................................................................................................... 61

6.4 USING FINGERPRINT SCANNER ................................................................................................................................ 62

6.4.1 Fingerprint Scanner Location ........................................................................................................................ 62

CHAPTER 7: ACCESSORIES ....................................................................................................................................... 63

7.1 HAND STRAP INSTALLATION ..................................................................................................................................... 63

APPENDIX ...................................................................................................................................................................... 64

APPENDIX A: PRODUCT SPECIFICATIONS ........................................................................................................................ 64

APPENDIX B: ORDER INFORMATION ................................................................................................................................ 65

4

Rugged Mobile Computer E500RM8 User Guide

APPENDIX C: SOFTWARE DEVELOPMENT KIT .................................................................................................................. 66

APPENDIX D: OS IMAGE UPDATE ................................................................................................................................... 66

APPENDIX E: OTA ONLINE UPDATE ............................................................................................................................... 67

5

Preface

Copyright Notice

No part of this document may be

reproduced, copied, translated, or

transmitted in any form or by any

means, electronic or mechanical, for

any purpose, without the prior written

permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are

trademarks or registered trademarks

of their respective owners.

Disclaimer

We reserve the right to make

changes, without notice, to any

product, including circuits and/or

software described or contained in this

manual in order to improve design

and/or performance. We assume no

responsibility or liability for the use of

the described product(s) conveys no

license or title under any patent,

copyright, or masks work rights to

these products, and make no

representations or warranties that

these products are free from patent,

copyright, or mask work right

infringement, unless otherwise

specified. Applications that are

described in this manual are for

illustration purposes only. We make

no representation or guarantee that

such application will be suitable for the

specified use without further testing or

modification.

Warranty

Our warranty guarantees that each of

its products will be free from material

and workmanship defects for a period

of one year from the invoice date. If

the customer discovers a defect, we

will, at his/her option, repair or replace

the defective product at no charge to

the customer, provide it is returned

during the warranty period of one

year, with transportation charges

prepaid. The returned product must be

properly packaged in its original

packaging to obtain warranty service.

If the serial number and the product

shipping data differ by over 30 days,

the in-warranty service will be made

according to the shipping date. In the

serial numbers the third and fourth two

digits give the year of manufacture,

and the fifth digit means the month (e.

g., with A for October, B for November

and C for December).

For example, the serial number

1W16Axxxxxxxx means October of

year 2016.

6

Rugged Mobile Computer E500RM8 User Guide

Customer Service

We provide a service guide for any

problem by the following steps: First,

visit the website of our distributor to

find the update information about the

product. Second, contact with your

distributor, sales representative, or our

customer service center for technical

support if you need additional

assistance.

You may need the following

information ready before you call:

 Product serial number

 Software (OS, version,

application software, etc.)

 Description of complete

problem

 The exact wording of any error

messages

In addition, free technical support is

available from our engineers every

business day. We are always ready to

give advice on application

requirements or specific information

on the installation and operation of

any of our products.

Advisory Conventions

Four types of advisories are used throughout

the user manual to provide helpful

information or to alert you to the potential for

hardware damage or personal injury. These

are Notes, Important, Cautions, and

Warnings. The following is an example of

each type of advisory.

Note: A note is used to

emphasize helpful information.

Important: An important note

indicates information that is

important for you to know.

Caution: A Caution alert

indicates potential damage to

hardware and explains how to

avoid the potential problem.

Warning! An Electrical Shock

Warning indicates the potential

harm from electrical hazards

and how to avoid the potential

problem.

7

Read Me First

Safety Information

Follow and adhere to all warnings and

instructions in this manual. For your safety,

please read all safety and operating

instructions before using the product. Keep

this manual for future reference.

General Product Safety

Sécurité générale des

produits

This product should not be used near

water such as bathtubs, sinks, swimming

pools, wet basement, etc.

Ce produit ne dois pas être utilisé près de

l'eau comme les baignoires, les éviers, les

piscines, les sous-sols humides, etc.

Do not block any ventilation openings. Do

not place the product against a wall or in

an enclosed space as doing so might

impede the flow of cooling air.

Ne pas bloquer les ouvertures de

ventilation. Ne pas placer le produit contre

un mur ou dans un espace clos de façon à

entraver la circulation de l'air de

refroidissement.

Do not place the product near any heat

sources such as radiators, warm air

intakes, stoves or other heat-generating

devices (including amplifiers or other heat

producing equipment).

Ne pas placer le produit près d'une source

de chaleur comme des radiateurs, les

arrivées d'air chaud, poêles ou autres

produits générant de la chaleur (y compris

les amplificateurs ou autre équipement

produisant de la chaleur.)

Do not disregard the safety that a polarized

or grounded connection can provide. A

polarized connection consists of two plugs,

one of which is larger than the other. A

grounded connection has two blades and a

third one that is grounded. If the main plug

provided cannot be inserted into your

outlet, consult an electrician to replace

your obsolete outlet.

Ne pas ignorer la sécurité qu'une prise

polarisée ou une prise de terre peut

prévoir. Une prise polarisée se compose

de deux fiches, dont l'une est plus large

que l'autre. Une prise de terre possède

deux lames et une troisième qui est la

terre. Si la fiche principale fournie ne peut

être insérée dans votre prise, consultez un

électricien pour remplacer votre prise

obsolète.

Protect the power cord from being crushed

or pinched, particularly in the area of the

plugs, any receptacles used, and the point

of exit from the apparatus. Do not break off

the ground pin of the power cord.

Empêcher le cordon d'alimentation d'être

écrasé ou pincé, en particulier dans les

zones de prises, des containers utilisés, et

du point de sortie de l'appareil. Ne pas

casser la broche de terre du cordon

d'alimentation.

Use only accessories specified by the

manufacturer.

Utiliser uniquement les accessoires

spécifiés par le fabricant.

Use only with its transport carriage, stand,

tripod, console or table specified by the

manufacturer or sold with the product.

When using a carriage, move the carriage

assembly with the product carefully to

avoid damage from falling over.

Utiliser uniquement avec son chariot de

transport, support, trépied, console ou

table spécifiés par le fabricant ou vendu

avec le produit. Lors de l'utilisation d'un

charriot, déplacez l'ensemble chariot avec

le produit avec soin pour éviter tout

dommage de chute.

8

Rugged Mobile Computer E500RM8 User Guide

Unplug this apparatus during lightning

storms or when it is not being used for long

periods.

Débrancher cet appareil durant les orages

ou lorsqu'il n'est pas utilisé pendant de

longues périodes.

Refer all servicing to qualified service

personnel. A technical intervention is

required when the apparatus has been

damaged in any way, for example if the

power cord or plug is damaged, liquid has

been spilled or objects have fallen inside

the unit, if the product has been exposed to

rain or moisture, if it does not operate

normally or if it has been dropped.

Confier toute réparation à du personnel

qualifié. Une intervention technique est

nécessaire lorsque l'appareil a été

endommagé de quelque façon, par

exemple si le cordon d'alimentation ou la

fiche est endommagé, du liquide a été

renversé ou des objets sont tombés à

l'intérieur de l'unité, si le produit a été

exposé à la pluie ou à l'humidité, s'il ne

fonctionne pas normalement ou s'il a été

jeté.

Precaution on Battery Pack

Précaution avec le bloc-pile

Do Not Expose the Battery Pack to

Excessive Heat, or Extreme Heat (Near

Fire, in Direct Sunlight for example)

Generation of heat, ignition or rupture may

result

Ne pas exposer le bloc-pile à une Chaleur

Excessive, ou une Chaleur Extrême (Près

d'un feu, sous la lumière du soleil par

exemple) Une production de chaleur,

l'amorçage ou la rupture peuvent être

occasionnés

Do Not Disassemble, Modify, or Insert

Sharp Objects Into the Battery Pack.

Electrolyte leakage, generation of heat,

ignition or rupture may result.

Ne pas démonter, modifier, ou insérer des

objets pointus à l'intérieur du bloc-pile. Une

fuite d'électrolyte, la génération de chaleur,

l'amorçage ou la rupture peuvent être

occasionnés.

Do Not Short the Positive (+) and Negative

(-) Terminals of the Battery. Generation of

heat, ignition or rupture may result. When

carrying or storing the device, do not place

the battery pack together with articles that

may contact electricity.

Ne pas court-circuiter les bornes Positive

(+) et Négative (-) de la pile, la génération

de chaleur, l'amorçage ou la rupture

peuvent être occasionnés. Lors du

transport et du rangement de l'appareil, ne

pas placer le bloc-pile en même temps que

des articles pouvant créer un contact

électrique.

Do Not Apply Shocks to the Battery by

Dropping It or Applying Strong Pressure to

It. Electrolyte leakage, generation of heat,

ignition or rupture of battery may occurs.

Ne pas faire subir de choc à la pile en la

laissant tomber ou en appliquant une forte

pression dessus. Une fuite d'électrolyte, la

génération de chaleur, l'amorçage ou la

rupture peuvent être occasionnés.

Do Not Charge the Battery Other Than

Methods Those Specified In This Manual.

If the battery is not charged using one of

the specified methods, electrolyte leakage,

generation of heat, ignition or rupture may

result.

Ne pas charger la pile par d'autres

méthodes que celles spécifiées dans ce

manuel. Si la pile n'est pas chargée en

utilisant l'une des méthodes spécifiées,

une fuite d'électrolyte, la génération de

chaleur, l'amorçage ou la rupture peuvent

être occasionnés.

9

Read Me First

When the Battery Pack Has Deteriorated,

Replace It with a New Battery. Continued

use of a damaged battery pack may result

in heat generation, ignition or battery

rupture.

Lorsque la pile est détériorée, la remplacer

par une nouvelle pile. L'utilisation continue

d'une pile endommagée peut occasionner

une génération de chaleur, l'amorçage ou

la rupture de la pile.

Do Not Use the Battery Pack With Any

Other Products. The battery pack is

rechargeable and is only designed for this

specific product. If it is used with a product

other than the specified product, electrolyte

leakage, generation of heat, ignition or

rupture may result.

Ne pas utiliser avec un autre produit La

batterie est rechargeable et a été

conçue pour un produit spécifique. Si

elle est utilisée sur un produit différent

de celui pour lequel elle a été conçue,

des pertes d’électrolytes et une production

de chaleur sont possibles, elle

risque également de prendre feu ou de

casser.

Do Not Use This Product With Battery

Other Than the One Specified.

Ne pas utiliser ce produit avec une batterie

autre que celle spécifiée

Discontinue using device immediately if

you notice the battery is swelling, or looks

puffy or misshapen. Do not attempt to

charge or use the device. Do not handle a

damaged or leaking battery. Do not let

leaking battery fluid come into contact with

your eyes, skin or clothing.

Si vous remarquez une pile gonflée,

élargie ou anormale, cesser l’utilisation de

l’appareil immédiatement. N’essayez pas

de recharger l’appareil ou de l’utiliser. Ne

pas manipuler une pile qui fuit ou qui est

endommagée. Ne laissez pas de liquide

qui fuit entrer en contact avec vos yeux,

votre peau ou vos vêtements.

Exposure to Radio Use

E500RM8 series is equipped with

Bluetooth, Wi-Fi and Cellular modem

radio. In some situations or areas, user

may be required to turn off the radios. For

example:

 User’s needs to turn the phone OFF

when in an area posted “TURN

OFF RADIO SIGNAL.” to avoid

interfering with blasting operations.

 User needs to turn OFF the radio

signal in health care facilities.

Hospitals or health care facilities

may be using devices that sensitive

to Radio Frequency energy.

 Aviation authority regulations

prohibit user from using phone

while in the aircraft.

In order to prevent the handheld from

emitting radio signals, do the following

steps:

 To turn off the device:

Press and hold the power button to

display the Phone Options menu for

3 sec then tap the POWER OFF

 To set the device into airplane

mode:

Press and hold the power button to

display the Phone Options menu for

3 sec then tap AIRPLANE MODE

 To turn off the Communication

options e.g. Bluetooth, Wi-Fi,

cellular modem radio:

Select MENU , tap SETTINGS

, and then tap WIRELESS &

NETWORKS.

If any radios are on, tap them to uncheck

all the radios’ checkboxes in the devices.

10

Rugged Mobile Computer E500RM8 User Guide

RF Exposure Information

This PDA meets the government’s

requirement for exposure to radio waves.

This PDA is designed and manufactured not

to exceed the emission limits for exposure to

radio frequency (RF) energy set by the

Federal Communications Commission of the

U.S. Government. The exposure standard

for wireless devices employs a unit of

measurement known as the Specific

Absorption Rate (SAR). The SAR limit set by

the FCC is 1.6W/Kg. Test for SAR are

conducted using standard operating

positions accepted by the FCC with the

device transmitting at its highest certified

power level in all tested frequency bands.

Although SAR is determined at the highest

certified power level, the actual SAR level of

the device while operating can be well below

the maximum value. This is because the

PDA is designed to operate at multiple

power levels so as to use only the poser

required to reach the network.

In general, the closer user to a wireless base

station antenna, the lower the power output.

For body worn operation, this PDA has been

tested and meets the FCC RF exposure

guidelines for use with an accessory that

contains no metal and the positions of the

handset minimum of 1.5 cm from the body.

User of other enhancements may not ensure

compliance with FCC RF exposure

guidelines. If user do not use a body-worn

accessory and are not holding the PDA at

the ear, position the handset a minimum of

1.5 cm from your body when the device is

switched on.

Electrostatic Discharge

Caution:

Please follow proper

electrostatic discharge

precaution to prevent static

damage that can harm

electronic components inside

your device.

Driving

Using mobile device or

accessories while driving may

cause distraction and can be

illegal in some areas where

you drive. Please obey the

laws and regulations on the

use of mobile device

Handling and Maintenance

Follow and adhere to all warnings and

instructions in this manual. For the longevity

of the product usage, please read all

operating instructions before using the

product. Keep this manual for future

reference.

General Guideline

Guide Général

Keep the product at least 13 cm (5 inches)

away from electrical appliances that can

generate a strong magnetic field such as

TV, refrigerator, motor, or a large audio

speaker.

Garder le produit au moins à 13 cm (5

pouces) de distance des appareils

électriques qui peuvent générer un fort

champ magnétique comme une télévision,

un réfrigérateur, un moteur, ou un

important haut-parleur.

11

Read Me First

Do not place heavy objects on top of the

tablet computer as this may damage the

display.

Ne pas placer d'objets lourds sur le dessus

de l'ordinateur tablette cela peut

endommager l'écran.

The screen surface can be easily

scratched. Use with care. Do not use paper

towels to clean the display but use the

included cleaning cloth. Avoid touching it

with a pen or pencil.

La surface de l'écran peut être facilement

rayée. Utiliser avec précaution. Ne pas

utiliser de serviette en papier pour nettoyer

l'écran mais utiliser le chiffon de nettoyage

inclus. Éviter de toucher avec un stylo ou

un crayon.

To maximize the life of the backlight in the

display, allow backlight to automatically

turn off as a result of power management.

Avoid using a screen saver or other

software that prevents the power

management from working.

Pour maximiser la durée de vie du

rétroéclairage de l'écran, autoriser le

rétroéclairage résultant de la gestion de

l'alimentation. Éviter d'utiliser un

économiseur d'écran ou un autre logiciel

empêchant la gestion de l'alimentation de

fonctionner.

Cleaning Guideline

Guide de nettoyage

Use a soft cloth moistened with water or a

non-alkaline detergent to wipe the exterior

of the product.

Utiliser un chiffon doux humidifié avec de

l’eau ou un détergeant non alcalin pour

essuyer l'extérieur du produit.

Gently wipe the display with a soft, lint-free

cloth. Do not use alcohol or detergent on

the product.

Essuyer délicatement l'écran avec un

chiffon doux non pelucheux. Ne pas utiliser

d'alcool ou un détergent sur le produit.

Touchscreen Guideline

Guide de l'écran tactile

Use your finger or the stylus on the display.

Using sharp or metallic object may cause

scratches and damage the display, thereby

causing errors.

Utiliser votre doigt ou le stylet sur l'écran.

L'utilisation d'un objet pointu ou métallique

peut provoquer des rayures.

Use a soft cloth to remove dirt on the

display. The touchscreen surface has a

special protective coating that prevents dirt

from sticking to it. Not using a soft cloth

may cause damage to the special

protective coating on the touchscreen

surface. To clean off hard to remove dirt,

blow some steam on the particular area

and gently wipe away using a soft cloth.

Utiliser un chiffon doux pour enlever la

poussière sur l'écran. La surface de l'écran

tactile a un revêtement protecteur spécial

empêchant la saleté de se coller à lui. Ne

pas utiliser un chiffon doux peut

endommager le revêtement spécial sur la

surface de l'écran tactile. Pour nettoyer les

saletés plus difficiles à enlever, souffler de

la buée sur la zone particulière et essuyer

doucement avec un chiffon doux.

Do not use excessive force on the display.

Avoid placing objects on top of the display

as this may cause the glass to break.

Ne pas utiliser une force excessive sur

l'écran. Éviter de placer des objets au

dessus de l’écran cela pourrait provoquer

une cassure du verre.

When there is a noticeable discrepancy in

the operation of the touchscreen function

(your touch does not correlate to the

proper location on the screen), recalibrate

the touchscreen display.

Lorsqu'il y a un écart sensible dans le

fonctionnement de l'écran tactile (votre

contact ne correspond pas à la bonne

position sur l'écran), recalibrer l'écran

tactile.

12

Rugged Mobile Computer E500RM8 User Guide

EC Declaration of Conformity

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010 EN 55022: 2010 Class B

 EN55032

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

Radio and Telecommunication Terminal Equipment (R&TTE) Directive (2014/53/EU):

 EN 300 328

 EN 301 489-1/-3/-17/-24

 EN 301 908-1/-2

 EN 300 440-2

 EN 50566

Federal Communications Commission Radio Frequency Interface

Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

 FCC Part 15 Subpart B Regulations Class B

 FCC Part 15 Subpart C

 FCC Part 22 Subpart H

 FCC Part 27 Subpart B

CANADA

 ICES-003 / RSS-130 / RSS-133 / RSS-139 / RSS-247 / RSS-310 / RSS-102

13

About This User Guide

This User Guide provides information about using the Winmate® E500RM8 and accessories.

Note:

Some pictures in this guide are samples and can differ from actual product.

Documentation Set

The documentation set for the E500RM8 provides information for specific user needs, and

includes:

 E500RM8 Series Quick Start Guide - describes how to get the E500RM8 up and running.

 E500RM8 Series User Guide – contains detailed description on how to use the E500RM8,

its components and features.

Configurations

This guide covers the following configurations of E500RM8 Series:

4G

1D/2D

Barcode

Reader

Fingerprint

Scanner

Hotswap

Battery

Smart Card

Reader

E500RM8-4E

4G/LTE for

Europe

N/A

E500RM8-4EBM

4G/LTE for

Europe

Default

N/A

E500RM8-4EBF

4G/LTE for

Europe

Default

N/A

E500RM8-4EBS

4G/LTE for

Europe

Default

N/A

Default

E500RM8-4EH

4G/LTE for

Europe

N/A

Default

N/A

E500RM8-4EBMH

4G/LTE for

Europe

Default

N/A

Default

N/A

E500RM8-4EBFH

4G/LTE for

Europe

Default

N/A

E500RM8-4EBSH

4G/LTE for

Europe

Default

N/A

Default

Chapter Descriptions

Chapter 1, Getting Started provides basic instructions on how to use E500RM8, including main

SIM card, SD card and battery installation, powering on and resetting E500RM8.

Chapter 2, Using the E500RM8 provides basic instructions on using the E500RM8.

Chapter 3, Using Winmate Home Manager explains how to use WHM to lock the launcher.

Chapter 4, Connecting to Network and Devices explains how to connect E500RM8 to networks,

Bluetooth devices, and computer.

Chapter 5, Using Camera provides instructions on how to use camera on E500RM8.

Chapter 6, Capturing Data provides information on how to use Barcode Reader, Smartcard

Reader and Fingerprint Scanner that might be present in E500RM8.

Chapter 7, Accessories describes the available accessories and how to use them with the

E500RM8.

14

Rugged Mobile Computer E500RM8 User Guide

Chapter 1: Getting Started

This chapter tells you information about Winmate® E500RM8 Series PDA, its highlighted features,

and provides basic instructions for using the E500RM8, including powering on and resetting the

E500RM8.

1.1 Introduction

Thank you for purchasing Winmate® E500RM8 Series Rugged Mobile Computer. Winmate®

E500RM8 Series Rugged Mobile Computer is an enterprise-class PDA with powerful mobile

computing solution. The E500RM8 Series PDA brings a new level of flexibility, functionality and

rugged design to pocket-sized mobile devices, providing task workers and managers with the

power to streamline business processes, increasing productivity and improving customer service.

The E500RM8 packs WLAN, Bluetooth, GPS, and WWAN function - all into a single device. With

great multiple wireless communicate design, this product will be applicable to mobile worker,

business application, and IT requirements.

1.2 Product Features

Winmate® E500RM8 Rugged Mobile Computer features:

 ARM® Cortex™-A53 Octa Core 1.3 GHz

 Memory includes 2 GB RAM LPDDR3 and 16 GB eMMC

 Support extra Micro SD card and maxima to 32 GB

 5.0-inch capacitive multi-touch display offers 1280 x 720 pixel resolution

 Mobile broadband:

o GSM/GPRS/EDGE: Band 2 / 3 / 5 / 8

o WCDMA/HSDAP/HSPUA: Band 1 / 2 / 4 / 5 / 8

o FDD-LTE: Band 1 / 3 / 4 / 7

o TDD-LTE: Band 38 / 39 / 40 / 41

 Bluetooth 4.0 Support BLE mode +wide-band speech

 Wi-Fi 802.11 a/b/g/n

 Built-in GPS module supports GPS, GLONASS and BeiDou, LNA on board with passive

ANT

 Dual SIM card slot

 Dual cameras include 2MP front side and 8MP rear side

 Support NFC

 Support 1D/2D Barcode Reader, Fingerprint Scanner, and Smart Card Reader as option.

15

Chapter 1: Getting Started

1.3 Unpacking

If any of the following items are missing or damaged, contact us.

Standard packing list includes:

 E500RM8

Varies by product specifications

 Quick Start Guide

(Hardcopy)

P/N: 9152111K101E

 Li-ion Battery

P/N: 32040370400B

 Power Plug

Input: AC 100-240V 50/60 Hz

Output : 5V-2A

Varies by country

 Micro USB Cable

P/N: 9487049050K0

 Micro SD Card (16GB)

P/N: 76000000000V

 Hand Strap

P/N: 9B0000000416

E500RM8 Optional Accessories:

 Charging Dock

DD-E50R-2: P/N 98TA05Z00002

MD-E50R-6: P/N 98DP05A00001

 Battery Charging Dock

BD-3900-2: 98K004A0000G

BD-3900-6: 98K000A0004G

 Battery

P/N: 9480058040K03.7V 3900mAh

Li-ion removable battery

16

Rugged Mobile Computer E500RM8 User Guide

1.4 Description of Parts

Front View

Description of Parts:

No

Item

Description

1

LED Indicator

LED indicator indicates the battery power or charging status

2

Light Sensor

Light sensor detect the availability of light and automatically

control the brightness of a screen backlight intensity

3

Proximity Sensor

Proximity function is used specifically towards near field

proximity applications. In mobile phones, the proximity

detection can detect when the user positions of mobile phone

is close to their ear

4

Front Receiver

Use to listen during phone conversation.

5

2MP Front Camera

To capture a front view picture and use for Video call.

6

Function Key

Use to trigger the barcode reader for E500RM8 series with

barcode reader (differs by product type)

7

All Around

Elastomeric Rubber

Protects the device from water and dust

8

Volume Up / Down

Increases or decreases the call volume when a call is in

progress. In other applications, it controls the volume of music

or

9

Optical Bonded Touch

Screen

Optical bonding provides better sunlight reading ability

17

Chapter 1: Getting Started

*Note: Fn key functions may be programmed according to your order.

Rear View

Parts Description:

10

Four Physical Buttons

Back

Opens a home screen

Opens a menu with items that affect the current

screen or application

*Use to trigger the Barcode Reader for E500RM8

series with Barcode Reader (differs by product

type)

11

Smart Card Reader

To obtain card information and perform a transaction.

12

Dual Microphone with

Noise Cancellation

Use for making a phone call or voice recordings

13

5” IPS Display

Displays all information needed to operate the device.

No

Item

Description

1

Pogo-pin

Pogo-pin can be used for charging & extension function

2

Removable Battery

Removable battery

3

NFC (default)

Allows reading NFC tags

4

Hand Strap Slot

To install hand strap

5

8MP Rear Camera

To capture a rear view picture and use for making videos.

18

Rugged Mobile Computer E500RM8 User Guide

6

Fingerprint Reader

(Optional)

Allows scanning fingerprints

7

Barcode Reader

(Optional)

1D/2D Barcode Reader (*Will change to flat cover when

without barcode)

8

Waterproof Speaker

Provides audio output for music and video

9

Function Key

Use to trigger the barcode reader for E500RM8 series with

barcode reader (differs by product type)

10

Micro USB

Use for communication with peripheral devices.

11

DC Jack

Use for charging

12

2 x SIM Card Slots

Allows installing two SIM cards

13

Power Button

Press and hold the button for 3 seconds to turn on E500RM8.

Press to turn on/off the screen.

Press and hold the button for 3 seconds to select:

•POWER OFF –to turn off the device press button for 8 Sec

to force system power off

•AIRPLANE MODE –to disable all wireless connection

•SILENT MODE – to disable all the sounds except for the

alarms

•VIBRATION MODE – to vibrate all the notifications across

the entire device

•NORMAL MODE – Return to the user setting mode Press

and hold the button for 8 seconds to reboot the device.

14

Micro SD Card Slot

Allows installing micro SD card

19

Chapter 1: Getting Started

1.5 Dimensions

Measurements shown in mm.

*Note: this is a simplified drawing and some components are not marked in detail.

1.6 Getting Started

To start using the E500RM8 for the first time:

 Install SIM Card

 Install Micro SD Card

 Install the Battery

 Charge the E500RM8

 Power on the E500RM8

 Configure the E500RM8

20

Rugged Mobile Computer E500RM8 User Guide

1.6.1 SIM Card and SD Card Installation

To Install the SIM Card and SD Card:

1. Place the E500RM8 facing down.

2. Press the two latches up and removable the battery.

3. Locate the SIM card holder

4. Insert the SIM card (with the gold parts facing down and cut-off corner facing out) in the

direction of the arrow as shown in the figure.

5. Locate the SD card holder.

6. Push the SD card holder in the direction of the arrow to unlock it.

7. Pick and raise the SD card holder up in upright position and then put the SD Card into

the socket.

8. Close the SIM card holder and push it into lock position until there is a click sound.

1.6.2 Battery Installation

Inserting the standard Battery Pack into the device:

1. Disconnect AC adapter and power cord from the device.

2. Turn the device over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.

5. Insert the battery on the connector-pins side first, and then lower the battery into the battery

compartment. Continue to hold the Battery Release Slider before battery is fully inserted.

La page charge ...

Winmate E500RM8-4EBS Manuel utilisateur

Ce manuel convient également à

Winmate E500RM8-4EBS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents