Savant REM-1000 Pro Quick Reference Manual

Savant
Marque
Savant
Modèle
REM-1000 Pro
Taper
Quick Reference Manual
SAVANT® REM-1000 PRO SYSTEM
REMOTE AND BASE
QUICK REFERENCE GUIDE
BOX CONTENTS
–
SKU: REM-1000-02 / REM-1000I-02
(1) Savant Pro Remote (model: SUR-1000-00)
(1) Savant Pro Remote Base (model: SRB-1000-02)
(1) USB Power Supply with Interchangeable Blades (025-0162-xx)
(1) USB Power Supply - Domestic Use Only (025-0157-xx)
(1) 1.5 m USB A to micro USB B cable (064-0409-xx)
(1) Quick Reference Guide (this document)
IMPORTANT! Dependent on the SKU ordered will determine which power
supply is included.
SPECIFICATIONS
ENVIRONMENTS
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% (non-condensing)
DIMENSIONS Height Width Depth Weight
Remote
SUR-1000-xx
7.24 in
(183.8 mm)
1.97 in
(50.0 mm)
1.06 in
(27.0 mm)
0.33 lb
(148.6 g)
Remote Base
SRB-1000
1.17 in
(29.6 mm)
4.16 in
(105.6 mm)
3.10 in
(78.8 mm)
0.36 lb
(163.4 g)
Packaging with
contents
8.85 in
(224.8 mm)
4.90 in
(124.4 mm)
3.71 in
(94.2 mm)
1.60 lb
(725.0 g)
POWER
Power Supply 100/240V AC (60/50 Hz) to 5V DC 2A
Base Input 5V DC 2A
Remote Battery Rechargeable Lithium-Ion
DISPLAY
Touchscreen High Resolution Multi-Color LCD Display
LCD Dimensions 2.57 in (65.3 mm) x 1.46 in (37.0 mm)
Diagonal 2.95 in (74.9 mm)
STANDARDS
Wireless Wi-Fi® (802.11 b/g/n 2.4 GHz)
Bluetooth Bluetooth v4.0
Security WPA™, WPA2™, WPA™ + WPA2™, WEP
REGULATORY
Safety & Emissions FCC Part 15, CE Mark, C-Tick, UL
Pro Remote Base Contains FCC ID: TLZ-CU277B and IC: 6100A-CU277B
Pro Remote FCC ID: ASU-CRU0100 and IC: 10052A-CRU0100
RoHS Compliant
MINIMUM SUPPORTED RELEASE
Savant OS: da Vinci 8.0
ADDITIONAL INFORMATION
– The Pro Remote and Base need to be within 30 feet (9.14 m) of each
other to communicate.
– Support for up to two Pro Remotes per user zone.
– Automatic software updates to the Remote will initiate if it is left
cradled overnight, with no A/V services active.
– Software updates can be initiated manually from the About page on
the Remote (only if update is available).
– The Pro Remote Base will receive firmware updates when updated
firmware is available in the da Vinci software running on the Host.
GET TO KNOW THE REMOTE
POWER BUTTON
Press/Release – Powers the Remote on. Savant Logo will
appear in 5-7 seconds.
– With the Remote powered on, the power
button can toggle the last used A/V service
on or o.
Press/Hold 5 sec. Powers Remote o.
MICROPHONE The microphone for Voice Commands is positioned
under the small hole on top of Remote.
IMPORTANT: Do not insert objects into the
microphone opening.
TOUCHSCREEN
DISPLAY
– Multi-colored LCD display with multiple pages
for viewing and control of available services.
– Motion activated.
– One touch and swipe operation.
VOLUME Increase or decrease volume of the service selected
on the touchscreen display (active service).
CHANNEL Channel Up or Channel Down the service selected
on the touchscreen display (active service).
NAVIGATION
(
D-pad
)
– Standard up, down, left, and right arrows for
on-screen control.
– Press and hold the up/down arrows to page up
or page down the on-screen menus.
– Press the Select button at the center of the D-pad
to select the highlighted item.
VOICE COMMAND Activate services, scenes, environmental controls, and
various other functions using voice commands. Press
and hold the Voice Command button, wait for the
on-screen prompt, and speak the commands clearly.
TIP: Speak the phrase Voice Commands into the
Remote to open a list of supported commands.
REMOTE BASE
Charging Charges the battery when the Remote is set into
the Remote Base.
Wi-Fi Remote Base communicates with the Host over the
local Wi-Fi network.
Bluetooth Remote Base communicates with the Pro Remote
using Bluetooth v4.0.
REMOTE BASE
(
Bottom
)
LED STATUS
LIGHT
RESET
PINHOLE
TOUCHSCREEN
DISPLAY
CHANNEL
VOLUME
POWER
MICROPHONE
VOICE
COMMAND
NAVIGATION
(
D-pad
)
REMOTE
BASE
REMOTE BASE LED STATES
O – No power
On Solid (Yellow) – The base is rebooting.
– The base is provisioned with network creden-
tials but cannot connect to the local network.
This can occur because either the network is
down or the network credentials have changed.
Blinks Once (Yellow) – The base is in Access Point Provisioning Mode
and ready to be provisioned and connected to
the local network.
Blinks Once (Green) – The base is provisioned and connected
to the local network.
On Solid (Green) – The base is connected to the local network and
communicating with the Host.
Rapid Blink (Red) – The reset button on bottom of base is held
down for at least five seconds. When button is
released, the rapid blink will stop and the base
will reboot.
Rapid Blink (Yellow) – The locate feature was activated using Smart-
Connect.
Blinking (Yellow/Green) – Firmware is updating on the base.
For product
information:
Part # HDH6A002010 3D
FCC INTERFERENCE STATEMENT: PRO REMOTE AND BASE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one of the following measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
–
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Identifier for Savant Remote
This device electronically displays the FCC declaration of conformity logo as well
as the FCC and IC identifier. This information can be found on the device by accessing:
(main menu) Settings About.
Identificateur de la FCC et d’IC pour Savant Remote
Ce périphérique par voie électronique ache le logo de déclaration de conformité
FCC ainsi que l’identificateur de la FCC et d’IC. Cette information peut être trouvée sur
le terminal en accédant à: (menu principal) Settings (Paramètres) About
(A propos de).
Radiation Exposure Statement: Pro Remote Base
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR
are conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands.
INDUSTRY CANADA STATEMENT: PRO REMOTE AND BASE
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage, et
2. L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
–
This Class B digital apparatus complies with Canadian ICES-003.
–
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
–
This device complies with RSS-310 of Industry Canada. Operation is subject to the
condition that this device does not cause harmful interference.
–
Cet appareil est conforme à la norme RSS-310 d’Industrie Canada. L’opération est soumise
à la condition que cet appareil ne provoque aucune interférence nuisible.
–
This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter, except tested built-in radios. The County Code Selection
feature is disabled for products marketed in the US/Canada.
–
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec
une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été
testées. La fonction de sélection de l’indicatif du pays est désactivée pour les produits
commercialisés aux États-Unis et au Canada.
Radiation Exposure Statement: Pro Remote Base
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operate with minimum distance
20cm between the radiator and your body.
Déclaration d’exposition aux radiations: Pro Remote Base
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies
pour un environnementnon contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
NETWORK REQUIREMENTS
Savant requires a wireless network that is configured to make use of at least
one of the supported wireless standards listed in the Specifications Table.
Connect all Savant devices to the same local area network (LAN) or subnet
as the host. Savant recommends not implementing any type of trac or
packet shaping in your network topology for the Savant devices as this may
interfere with performance.
NETWORK CONFIGURATION
To ensure that the IP Address will not change due to a power outage,
a static IP Address or DHCP reservation should be configured. Savant
recommends using DHCP reservation within the router. By using this
method, static IP Addresses for all devices can be managed from a single
UI, avoiding the need to access devices individually.
Setting DHCP reservation varies from router to router. Refer to the
documentation for the router to configure DHCP reservation.
Refer to the REM-1000 Pro Remote Deployment Guide (009-1398-xx)
located on the Savant Community for information on connecting the Pro
Remote Base to the local network.
ADDITIONAL DOCUMENTATION
Additional Documentation is available on the Savant Community.
– REM-1000 Pro Remote Deployment Guide (009-1479-xx)
– REM-1000 Pro Remote User Guide (009-1410-xx)
© 2017 Savant Systems, LLC. 45 Perseverance Way, Hyannis, MA 02601
Telephone: 508 683 2500
Printed in China.
009-1378-02, 170601
Savant.com
Repeat
.1s .1s.1s .1s
Repeat
.1s .1s.1s .1s
Repeat
1s1s
Repeat
1s1s
Repeat
1s1s
Constant
Constant
  • Page 1 1
  • Page 2 2

Savant REM-1000 Pro Quick Reference Manual

Savant
Marque
Savant
Modèle
REM-1000 Pro
Taper
Quick Reference Manual
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents